ok i think that my wheel bearing went in my passenger front. Question is i have a set of 86-87 knuckles/hubs that were on the car now i got the 88-89's on it , would the bearings fri from the older stuff to the newer? and would the hubs be able to be swapped over too if i eeded them?
1989 Accord Lx-i hatchback (current DD project)
1986 Olds Cutlass 442 clone (never ending project)
3Geez resident body man
Owner of Wreck-less auto body
The knuckles will swap, but the 88-89 LX-i calipers will not fit the 86-87 knuckles. 88-89 LX or DX calipers will fit the 86-87 knuckles. As for hubs i am not sure, you are better off getting a new bearing.
Sam
1989 Accord LX: Sold with 208k-now somewhere around 230k with new owner
Current:
2014 Elantra Sport 6MT
2000 Montero Sport 4x4 (beater, trail rig)
i know the knuckles swap for the brakes and everything, i swapped over a while ago the 86-87 knuckles /hubs and all to the 88-89 ones my questuin was just with the wheel bearings if they can be mix matched
1989 Accord Lx-i hatchback (current DD project)
1986 Olds Cutlass 442 clone (never ending project)
3Geez resident body man
Owner of Wreck-less auto body
It's not worth the trouble. Spend the extra $60 or $70 and get new ones. Most shops charge more than that to press them.
88 LX-i coupe auto (241K DD), 88 LX-i coupe 5-speed, 89 SE-i coupe auto.
CARDONE SUCKS.Originally Posted by stat1K
its no problem pressing them, my father is a mechanic so his shop has the press and tghe tools to do it, all im asking is if the bearings swap over from the 86-87's to the 88-89's
1989 Accord Lx-i hatchback (current DD project)
1986 Olds Cutlass 442 clone (never ending project)
3Geez resident body man
Owner of Wreck-less auto body
They will swap.
88 LX-i coupe auto (241K DD), 88 LX-i coupe 5-speed, 89 SE-i coupe auto.
CARDONE SUCKS.
Posting Permissions
Reply With Quote
Bookmarks