My ECU is blinking 6 times but the check engine light isn't on. I replaced the ECT sensor but it's still doing it and my idle's still crappy. What's going on?
My ECU is blinking 6 times but the check engine light isn't on. I replaced the ECT sensor but it's still doing it and my idle's still crappy. What's going on?
Do you have a way to take a reading of it with a meter maybe ?
wp
1988 Lxi owner since August 1995
336k miles running strong!
Now running E85.
Oldblueaccord <<< MY YOUTUBE PAGE!
ive noticed that the check engine light will only come on if the error codes are somewhat important. I take it the engine coolant temperature sensor isnt that important lol. I wood not know how to fix it tho. I should work if u put a new one in... right
https://www.3geez.com/forum/showthread.php?t=60400
read this blurb and make sure you changed the correct sensor to start with. One is for the ECU the other is for you temp guage.
wp
1988 Lxi owner since August 1995
336k miles running strong!
Now running E85.
Oldblueaccord <<< MY YOUTUBE PAGE!
The ECU will only light the CEL light if it sees the problem at the moment the car is running. If you turn off the car and start it again, the CEL will remain off until the ECU sees the problem again.
However, the ECU stores the code in it's memory so you can diagnose the problem later.
http://pages.videotron.com/omus
3geez member since July 12 2000
I need these parts!
https://www.3geez.com/forum/showthread.php?t=67742
Maybe I should reset the ecu and see if the code comes back, what fuse do I need to pull to do that?
Okay, I'm stupid. I disconnected the battery to put a new one and that reset the ECU. The code no longer comes up so I guess all I had to do is reset it.
Bookmarks