That's some cool stuff right there
That's some cool stuff right there
Did you change the distributor?
http://pages.videotron.com/omus
3geez member since July 12 2000
I need these parts!
https://www.3geez.com/forum/showthread.php?t=67742
^^ no i did not change the dizzy, which is weird cause i dont get no error code for it.
yay everyones going obd1 (Y)
mine came stock with it yay go me
1988 Honda Accord LX-i Coupe 123k miles.
those doors on your car look really nice!!!
nah the left ones are gay cause they have scratches and dents
Im pleased to have good paint and no pin stripes ion them thoughh
nice one!!! going great job!
Your car is also a 1991.Originally Posted by Civic Accord Honda
yay everyones going obd1 (Y)
mine came stock with it yay go me
i know this
1988 Honda Accord LX-i Coupe 123k miles.
righto i lowered the back of my car tonight and wound my konis to full stiff to see how it handled. i found fail. my left rear shock is now leaking and it wont adjust thanks to the rocks in the middle of the road coming back from matts house 2 weeks ago, theres also large dents in my fuel tank and chassis rails and a bend up in the floor because of this.
either way i think im going to need to rebuild my rear konis , failure as
beast indeed
suck bout the shock failure aaron. maybe you just need some kyb's
and scare! where in the country side are you hiding?
right engine rebuild is on again. car is now taken of the road for a while for a make over, The 1st thing im doing is the engine rebuild, After that ill do the gearbox, ill use the b18 bellhousing i have with civic /integra ZC gearset accord 5th and ill try import a LSD of some sort from japan for it, After the gearbox is done ill spend on the suspension, all new bushes and ill shorten all 4 of my konis and get some more spring perch circlip grooves machined so i can adjust the height easier. ill need to buy some decent springs too dunno where from, tho as parts for these cars arent really easy to find over here, i dont just want lowering springs i want something that will handle well with my konis. Im going to also buy tyres at this time. Then ill put some money on the inside of my car, ill need to take a trip to a junkyard 200kms away to raid a Si-Exclusive for its carpet and seat belts as my carpets totally fucked and my drivers seat belts getting rooted. Ill also rob all the grey plastic trims that my car is missing, i want a tidy interior again lol. Then ill probably put some money on the bodywork, ill probably pay someone to do this as i hate rust and dents so bad. It wont get a complete respray but the roof needs a complete repaint and the bonnet needs re clean coating. after that its wof time, lets see if it flys straight through for a change ay
Last edited by AccordB20A; 07-06-2010 at 01:10 AM.
Re: AccordB20A's 2.0Si F1 Edition Build
Do you think digital dashboard can be installation with H22A engine or not how to connect the wire?
Now I got automatic air conditioner but, nobody can connect the wire for me can you tell me how to connect the wire?
you can make the dash work if you have all the wires and your cars body loom is factory so the dash loom will plug right into it.
with your heater unit, mine plugged right in to the old heater wiring, it has its own loom that u will need
crx wheels on the accord now so i can wear out the rest of the tread on the 15s, i think they look prety mint
those are small :O
looks pretty good!
1988 Honda Accord LX-i Coupe 123k miles.
might need to upgrade the dc2 wheels with some 15s 16s or 17s of the black and polished lip type
cleaned the shed out today!!! so this can happen....
and
can start working on this one now (Y)
yayah!
i like where this is headed!
right, lets open the bonnet and pull some shit off.
- drained coolant and removed radiator and disconnected heater hoses
- drained engine oil and removed dizzy and unplugged shit
- drained gearbox oil and remvoed the axles
- disconnected gearbox linkages and unbolted the exhaust system from the manifold
now waiting on an engine crane to lift this b18a/b20a hybrid motor out
yay progress ftw
lol, the main idea is to remvoe the box from t=my car so i can swap it into the other car i have that has a b18 gearbox, so i can sell the car, and ill run the b18 box with civic/integra gears and a LSd in my car.
removed my B20A gearbox
remove b18 box
and put b20 box back onto the b18, car is ready to sell now
Posting Permissions
Reply With Quote
Bookmarks