AccordB20A's 2.0Si F1 Edition Build

[AccordB20A]

wow didnt notice that your tranny crapped out. You're the only one who's ever had problems with b20a trannies, what the hell are you doing to them? lol
The scenario sounds rather amusing though. Cant believe you actually towed your car with a trailer behind it 300km with a strap and an itty bitty civic hahaha

what trailer? didnt have one, the civic my other mate was driving back and i was following at the time and then he had to tow me..

bloody hell aaron!
buy a cheap pos falcon or commodore for towing man
those things are cheap as chips
well cheaper than replacing b2k5's all the time
whats the diff between that and an f2k5?

i want good gas milage not 5km a liter open road fuck that, i can feel the difference between the f2k5 and b2k3, i passed a shitload of cars today, selected 3rd and floored it and blasted past, it seemed to accelerate way faster. doesnt take long to wind off 4th gear anymore :s

Nice, How did you get your wheels so cleen?

waterblaster

man...can the tranny be fixed at all?

nope, pics will tell soon

IN OTHER NEWS

i have a manual non power steering rack

[AccordB20A]

yay and now the forum software is fucking up again and not letting me view my last post on the last page

[Pico]

IN OTHER NEWS

i have a manual non power steering rack

when are you going to put the rack in?

[Civic Accord Honda]

sucks your trans committed a suicide , seems honda fails at making gear boxs. rather funny to here a 1300 civic auto towed it back though makes me wonder if i get my civics clutch fixed if i could tow an 81 civic 200miles.

[Hauntd ca3]

, i can feel the difference between the f2k5 and b2k3,

b2k3!
must be a rare g/box man!
but anyhoo
what sort of revs duz the f2k5 have you doin @ 100km/h in 4th and 5th

[AccordB20A]

b2k5!!! i failed

both 5th gears look the same on the rev counters 3100rpm-3200rpm at 100km/h

ill install the manual rack when i install my new motor i reckon, i need to find a large swaybar for it 1st :s, Will be good tho...... freeing up all that power the PS pump steals from the engine

[AccordB20A]

test fitted my B18B dizzy today.....

while it was bolted there i ripped apart an old set of leads and installed new wires in them and made a set....

then my gf comes home and says i have to take her to tyhe moves in 5 mins so i quickly wired the tdc sensor and crank sensor wires into my new dizzy and hooked it up and the car went!!. so yeah

More Tomorroe maybe

[Hauntd ca3]

looking good aaron
those leads need a clean tho
bloody woman eh!
thats why i just hired dark knight and got in pizza.
movie theatre seats are useless for pregnant woman so we dont go

[AccordB20A]

the whole engine bay needs a clean, will be good when i install my new engine, i will scrub the whole engine bay and delete all power steer parts and ac parts that are still there.i have to build a custom wiring loom too so i can de-loom the engine, now the coil is mounted on the dizzy i have to run a wire to the igniter in the dizzy from the old igniter on the firewall, im sure it will be fun, but i dont know whether to use shielded cable or not. the rest of the igniter wire is shielded, but if it doesn't need to be shielded i could use an EGR wire that goes right to the loom. i guess thats a good thing about using a blacktop loom, theres at least 2 unused wires coming from the ecu to the engine loom lol

[AccordB20A]

if anyone even reads this thread:



clocked over 300,000kms yesterday

[A18A]

haha cool, how many engines did that take?

[AccordB20A]

haha cool, how many engines did that take?

original a18a, replacement a18a it came with, the b20a from my old rp5476 then the blacktop smokey motor then this one
soon to be a new one

[2ndGenGuy]

yay 300000

[Hauntd ca3]

four motors to get that far!
god you must give them arse holes aaron
mines still good at 265,000 :p

[Rendon LX-i]

Shit i wish it was that easy to hook up a dizzy to a20s. so basicly a direct bolt in aaron.

[AccordB20A]

four motors to get that far!
god you must give them arse holes aaron
mines still good at 265,000 :p

mates preludes at 315000kms on stock b20a still going strong he beats on it every day, thats the strength of a mightly gold top

none of the motors actually failed i got my car at 268000kms and put 32000kms on it since i got it jan 2008

[MessyHonda]

Shit i wish it was that easy to hook up a dizzy to a20s. so basicly a direct bolt in aaron.

i might have something for you....hehe

[2ndGenGuy]

I don't get why you blow up so many transmissions, Aaron.

[Rendon LX-i]

i might have something for you....hehe

O bro im waiting...lol

[AccordB20A]

I don't get why you blow up so many transmissions Aaron.

haha nah its hondas weak diff's and the OMGPOWER of the b20a. its the clutches fauklt really for having too much bite, the diff doesnt like the shock off a 2nd gear dump that makes the wheels chirp

I should really install this vigor swaybar today

[AccordB20A]

okay i managed to get the swaybar on, its pretty big and it handles nice, now to do the front...

should this bar make the car feel more stable at high speeds ?

[Hauntd ca3]

a sway bar wont make the car more stable at speed.
will just give better turn in and flatter cornering.

[Tommy AC89 Thailand]

okay i managed to get the swaybar on, its pretty big and it handles nice, now to do the front...

should this bar make the car feel more stable at high speeds ?

here is a shitty photo from my shitty new camera!

I think that one is more bigger than my car.

[AccordB20A]

a sway bar wont make the car more stable at speed.
will just give better turn in and flatter cornering.

sweet lol

i still have to get around to porting and modifying my new b16 intake so i can remove the old one to send to you how much of a hurry are you in

[Rendon LX-i]

SWEET....looks good bro...i loved how mine handled