Getting Board

[koss007]

So i got board and started fixing some problems ... I now have a new timing belt and water pump and thermostat . new intake gaskets ... Im going to rebuild the frount end now ... So what would Prelude A-arms do on a stock springs ??? And does any one know the basic math on Custom spring rates ??? .. I had a brain fart ,too many hours at work today

[A20A1]

good luck replacing all the intake gaskets if you still run with the stock carb, it's usually a tight mess to work in.

[koss007]

Ya I found that out today ... those lower nuts are a pain .. on the plus my car runs a lot better