B20a Turbo Update

[TWOLOUDNPROUD]

Wel my b20a turbo is all most ready to go in all i need to do is do the intercooler and pipeing and put the b20a in my accord here some pic's.




Mod List
1.LudeSpeed Manifold

2.Costom APR Head Bolts

3Costom Web Cams
Intake.........Exhaust
valve lift........ .420......... .430
Duration:........230............237
Duration@050 : 200.........205
Lobe Center.... 110...........112
Intake opens -10 Before TDC Exhaust opens 34.5 Before BDC
Intake Closes 30 After After BDC EXhaust Closes -9.5 After TDC

4. Turbo T3/T4 T04E

5.OBD-1 converion Pr4 Ecu and B18A/B distributor

6.Stage 2 6puck clutch and plate

7.Precision 580cc injectors

8.B16 intake ported to 68mm

9. 68mm Throttle body

10. Two F22 cam gears

11.35mm 8psi waste gate Tial knock off

12.MSD A6

[forrest89sei]

SWEET!!!!!!!

[coope]

now thats nice when u get that hoe in take all the pics u can and vid it to

[Pico]

Looking good.
When do you plan on putting it in?

[Civic Accord Honda]

Wel my b20a turbo is all most ready to go in all i need to do is do the intercooler and pipeing and put the b20a in my accord here some pic's.




Mod List
1.LudeSpeed Manifold

2.Costom APR Head Bolts

3Costom Web Cams
Intake.........Exhaust
valve lift........ .420......... .430
Duration:........230............237
Duration@050 : 200.........205
Lobe Center.... 110...........112
Intake opens -10 Before TDC Exhaust opens 34.5 Before BDC
Intake Closes 30 After After BDC EXhaust Closes -9.5 After TDC

4. Turbo 3LDZ

5.OBD-1 converion Pr4 Ecu and B18A/B distributor

6.Stage 2 6puck clutch and plate

7.Precision 550cc injectors

8.B16 intake ported to 68mm

9. 68mm Throttle body

10. Two F22 cam gears

11.35mm 8psi waste gate Tial knock off

12.MSD A6

w00t

[TWOLOUDNPROUD]

Looking good.
When do you plan on putting it in?

next month

[knarg]

sweeeeet O_O

[carotman]

this exhaust wrap looks hot!

[RobT5580]

Looks good just watch the wastegate because i blew my last motor because my boost controller failed and spiked into the upper 20's. I was always leary of the knock off's. I have a 35mm tial if you want to stick with the 35mm.

[TWOLOUDNPROUD]

Looks good just watch the wastegate because i blew my last motor because my boost controller failed and spiked into the upper 20's. I was always leary of the knock off's. I have a 35mm tial if you want to stick with the 35mm.

How much are you looking to get for it?

[RobT5580]

I would take $150 given the next cheapest replacement runs around $240 roughly. It has the fire ring, bolts, and brass fittings with barbed nipples for hoses already on it.

[TWOLOUDNPROUD]

I would take $150 given the next cheapest replacement runs around $240 roughly. It has the fire ring, bolts, and brass fittings with barbed nipples for hoses already on it.

llet me see what i can work out my money is tight right now.

[bullard123]

Can't wait to hear the sounds of this beast!

[RobT5580]

I hear you im not trying to sell mine but if someone wants it i would go bigger since im going with a bigger turbo and more boost.

I actually bought a tial knock off by accident because they had in fine print "sty" which i guess meant tial style but i sent it back and needless to say people had spiking problems with them. If you have any B20A parts i could use i would consider a fair trade.

[TWOLOUDNPROUD]

I hear you im not trying to sell mine but if someone wants it i would go bigger since im going with a bigger turbo and more boost.

I actually bought a tial knock off by accident because they had in fine print "sty" which i guess meant tial style but i sent it back and needless to say people had spiking problems with them. If you have any B20A parts i could use i would consider a fair trade.

What parts are you looking for?

[RobT5580]

I need an oil pan but it would have to be mint no dents or warped or i will be in need of a head gasket set for the rebuild. Other than that im working on finishing my sei rear brakes and need misc parts.

[BASS_racer]

that's badass