how do i remove a hub nut

[levon2008]

hey guys i have a headache and a 18" breaker bar. I am trying to replace a outer cv boot and i need to remove the hub nut not the lug nuts, The big nut in the middle of the tire. I have a 18" breaker bar and im jumping on it and the nut wont come loose, i am turning the bolt counter clockwise and no budge any ideas?

[lostforawhile]

hey guys i have a headache and a 18" breaker bar. I am trying to replace a outer cv boot and i need to remove the hub nut not the lug nuts, The big nut in the middle of the tire. I have a 18" breaker bar and im jumping on it and the nut wont come loose, i am turning the bolt counter clockwise and no budge any ideas?

um did you remove the staking in the middle of the nut first? also have someone stand on the brakes,get a long piece of pipe, put it over the breaker bar handle, and jump up and down on it, i'm not kidding.

[levon2008]

i didnt see a staking

[levon2008]

i didnt see a staking

sorry there wasnt a staking like the gap in the nut doesnt have a staking so im taking it that its okay so i seriously need to jump on it?

[levon2008]

thanks im gona try that right now its like 7 pm here now im going to look like a crack head.

[levon2008]

thanks im gona try that right now its like 7 pm here now im going to look like a crack head.

it didnt work it just broke the breaker bar at the connection point. Is there a diffrent way to get this thing off because i have broke like 6 breaker bars already and i think my lifetime warranty is going to end soon

[Vanilla Sky]

Impact gun. I had issues with my spindle nuts with a 1/2 inch impact gun. Spray down with some PB Blaster and let it soak overnight, then give it a shot.

[russiankid]

Also get a torche and heat it up. Do not use a torche after PB blaster, use it before if you will use PB blaster!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

[forrest89sei]

Impact gun works best

I had someone stomp on the brakes and use one

[Hauntd ca3]

3/4 inch breaker bar and 4 foot bar
if that dont do it, gas axe

[A18A]

you need one of these

[AccordB20A]

lol i agree

[2oodoor]

do you understand what staking is? just making sure, the tip of the nut has a place that is bent down to keep the nut from turning, you have to get a small chisel and hammer to get the bent part out so the nut turns. I just did mine and had no trouble at all, again.

[MessyHonda]

what i did was use a big ass breaker bar to stop the studs from turning and then used a 32mm on a 1 foot ratchet and put my 160 pound body on it and it turned...i surprised how easy i took it off.

[levon2008]

Okay guys i got it off Pain in the arse. Took about 7 breaker bars glad i had a lifetime warranty on the thing, Autozone is pretty pissed but hey thats their fault for giving me the warranty. What i did was jump off the hood of my car onto the breaker bar and the bar flew off and hit me in the shin and walla, One big lump and a loose hub nut not too bad if i say so my self. now im working on getting the cv out, I dont want to do this ever again. This is like one of those nightmares that you say wake up its just a dream and then come to realize its not. By the time im done with all the work on this car it should be almost new :P

I might have to weld one of those up A18A looks like you do this alot not to bad of an idea if i say so myself, What did you use to weld it mig?

[Demon1024]

If you don't want to do it again put a new axle in it now. as long as you have the center cover for it it probably won't be as hard the next time

[A18A]

its not my breaker bar () so i cant take credit for it, you'll have to ask accordb20a

[lostforawhile]

i found a half in rachet in a pawn shop that was broke so i welded up the mechanish solid,now when i need a breaker bar a i put a pipe on it.

[levon2008]

Thank you everyone for the great information..

Levon

PS.

i put a new axle in its a aftermarket one made out of alloy pretty sweet looking and really light too.Theres a lifetime warranty on it so thats even better. I did the other side too so now im set for that. Also strap for cash so it looks like the body work is postponed until the next pay day . At least i can get to work .