I was trying to view the sight to build a coldair intake and its down... does anyone remember the parts needed and the steps necessary to build a coldair intake.?
Let me know so can go ahead and order the parts.!!
team delsol sight down
I was trying to view the sight to build a coldair intake and its down... does anyone remember the parts needed and the steps necessary to build a coldair intake.?
Let me know so can go ahead and order the parts.!!
CLICK IT OR TICKET PEOPLE!!
THEY'RE OUT THERE!!!
I think the page has been moved somewhere else and that site doesn't seem to be working either..
The pipe is from JCwhitney for $22.95 plus s/ h.
The part number is 81ZX3035N
Use the picture from the how-to to cut the pipe. Then use high temp ceramic based spray paint to paint the pieces inside and out if possible. Then go to the hardware store and buy the right amount of 2" hose clamps and Voila.... then it is just a matter of installing it. You will have to remove your bumper to get access to the space in the fender area. You will also have to grind the hole next to the battery a little bigger so the pipe will fit through. Then thery is the matter of moving the battery so that it won't hit the intake.
Those are the basic steps. Let me know if you need anything cleared up. Hopefully the site will be up soon so you can take a look for yourself.
Good luck!
peace out..
Last edited by 89accordlxi; 09-20-2002 at 06:32 AM.
89 Lx-i
Performance: K&N filter,custom CAI, Accel coil, MSD 6aL ignition, magnecor wires, high flow injectors, FPR, sport exhaust,Tokico springs/struts
Appearance: white gauges, side markers, headlight conversion, clear bumper signal/fog light conversion, SE-i center armrest and cupholder, SE-i leather seats
17" ADRs with 205/40/17 khumos
future plans: 16" or 17" rims(can scratch that one off the list 9-12-02), headers-high flow cat.-cat back piping. Rear disc brakes from SE-i, reground cam.
Oh yeah, don't forget the filter. I would recommend a K&N.
Peace..
89 Lx-i
Performance: K&N filter,custom CAI, Accel coil, MSD 6aL ignition, magnecor wires, high flow injectors, FPR, sport exhaust,Tokico springs/struts
Appearance: white gauges, side markers, headlight conversion, clear bumper signal/fog light conversion, SE-i center armrest and cupholder, SE-i leather seats
17" ADRs with 205/40/17 khumos
future plans: 16" or 17" rims(can scratch that one off the list 9-12-02), headers-high flow cat.-cat back piping. Rear disc brakes from SE-i, reground cam.
http://jdmfan.com/technical/performance/custom_intake
its copied to that site.
thank you gentleman!!!
The info really is gonna help out with this project.
Look out for the Full project car whenits done.
I'm still not done yet...I'm only 1/4 of the way there!
PEACE OUT !!
CLICK IT OR TICKET PEOPLE!!
THEY'RE OUT THERE!!!
Posting Permissions
Reply With Quote
Bookmarks