Page 2 of 2 FirstFirst 12
Results 26 to 32 of 32

Thread: OBD-1 Harness Questions...

  1. #26

    89T's Avatar
    Join Date
    Apr 2004
    Posts
    3,020

    Re: OBD-1 Harness Questions...

    hmm, good to know thanks.
    Also i am running a aem wideband. So i disabled the stock O2 sensor in the management and wired it in on pin D14(input on the neptune). Doing that leaves both shielded O2 sensor wires. I trimmed them back in the harness and wired them to the obd1 dizzy.
    I am gonna try to fire her up today, hopefully she runs. That's if i don't go fishing. LOL!
    un-motivated!
    someone make me an offer i just could not say no to.

    3GR



  2. #27
    3Geez Veteran AccordEpicenter's Avatar
    Join Date
    Nov 2002
    Vehicle
    1988 Honda Accord LX-i Turbo 2004 Acura TL 6 speed/navigation
    Location
    Ridin Dirty in New York
    Posts
    7,377

    Re: OBD-1 Harness Questions...

    I have the o2 sensor and closed loop disabled, as well as eld and vss and injector check and all that stuff disabled also. I did exactly as you did too jerry, used both old o2 sensor wires for the dizzy wiring. I only had to run 1 wire, so I used an old shielded RCA cable from an old audio setup i had, and cut the ends off. Worked great. Hopefully itll fire up ok...
    429whp 362wtq A20 TURBO. A20T>*

  3. #28

    89T's Avatar
    Join Date
    Apr 2004
    Posts
    3,020

    Re: OBD-1 Harness Questions...

    so i went out plugged it in, blew a fuse and went fishing to only catch every hungry mosquito at the lake.
    un-motivated!
    someone make me an offer i just could not say no to.

    3GR

  4. #29
    3Geez Veteran AccordEpicenter's Avatar
    Join Date
    Nov 2002
    Vehicle
    1988 Honda Accord LX-i Turbo 2004 Acura TL 6 speed/navigation
    Location
    Ridin Dirty in New York
    Posts
    7,377

    Re: OBD-1 Harness Questions...

    funny you had blown fuses, i had 2 blown fuses from god knows what issue before my car ran, i believe they were both under hood, one was the injector fuse and the other was the ecu fuse? I cant remember. They didnt blow a second time though. What was yours?
    429whp 362wtq A20 TURBO. A20T>*

  5. #30

    89T's Avatar
    Join Date
    Apr 2004
    Posts
    3,020

    Re: OBD-1 Harness Questions...

    alright , I fucked up put a wire in place where there were no corasponding wires! So I got a code 20. my bad.
    done! no codes but she wont run well. I added a shit ton of fuel and still barly smell any fuel. I think i have a dizzy problem namly base timing, but at this point i am tired of fucking with it. The tag on my old hood said 12 deg +-2 that sound right?
    heres the pin-out.
    http://img684.imageshack.us/i/17872520.png/

    Edit: d1 = a17 Sorry i forgot to add that to the pic

    i'll get it.
    Last edited by 89T; 06-20-2010 at 08:36 AM.
    un-motivated!
    someone make me an offer i just could not say no to.

    3GR

  6. #31

    LX-incredible's Avatar
    Join Date
    Sep 2006
    Vehicle
    88 LX-i Coupe Twins/89 SE-i Coupe/88 Suburban
    Location
    Tucson, AZ
    Posts
    2,495

    Re: OBD-1 Harness Questions...

    Set the timing at 15º BTDC with D4 grounded.
    88 LX-i coupe auto (241K DD), 88 LX-i coupe 5-speed, 89 SE-i coupe auto.
    Quote Originally Posted by stat1K View Post
    who is tim and where can i get naughty pictures of him?
    CARDONE SUCKS.

  7. #32

    89T's Avatar
    Join Date
    Apr 2004
    Posts
    3,020

    Re: OBD-1 Harness Questions...

    LX-incredible, You're money!

    she fired right up! time to get her done.
    un-motivated!
    someone make me an offer i just could not say no to.

    3GR

Similar Threads

  1. ecu harness
    By 87SIA20A3T in forum Performance
    Replies: 14
    Last Post: 09-04-2008, 03:38 PM
  2. harness
    By sinisterfuzzy in forum Interior & Exterior Care
    Replies: 1
    Last Post: 05-18-2006, 06:54 PM
  3. Harness help
    By Robs89LXi in forum 3geez Accords
    Replies: 4
    Last Post: 07-27-2004, 07:51 PM
  4. wire harness kit
    By 89accord_lxi_coupe in forum Interior & Exterior Care
    Replies: 4
    Last Post: 01-02-2004, 10:42 AM
  5. Help with Harness !
    By GreenMachine in forum EFI Tech
    Replies: 14
    Last Post: 06-25-2002, 04:46 PM

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
This website uses cookies
We use cookies to store session information to facilitate remembering your login information, to allow you to save website preferences, to personalise content and ads, to provide social media features and to analyse our traffic. We also share information about your use of our site with our social media, advertising and analytics partners.
     
Links monetized by VigLink