Results 1 to 9 of 9

Thread: 3rdGens = Hard to get parts?

  1. #1
    DX User
    Join Date
    Mar 2008
    Vehicle
    89' Honda Accord EX-i Coupe
    Location
    Brampton
    Posts
    29

    3rdGens = Hard to get parts?

    Hey all, just recently bought a 89' Accord, and just wanted to know whether or not overall if its difficult to get parts for these cars. Just wanted some input from you guys because even with the high mileage on the car, id love to drive it for the next few years, and that means putting some money into it (repainting it since im gunna be working at a body shop, Rota Slipstream rims, lowering it, etc.).

    So are parts hard to come by, or is that nothing that ebay cant fix?



  2. #2

    Hash_man_Se_i's Avatar
    Join Date
    Sep 2002
    Vehicle
    1988 EX-i 4dr, 1989 se-i 4dr (RIP), 1989 se-i 4dr (RIP), 2006 TSX
    Location
    Calgary, AB, Canada
    Posts
    3,816

    Re: 3rdGens = Hard to get parts?

    Ebay is ok... but honestly, the forum and other members are a great source for parts, and where I have obtained many things myself.

    Other then that, there is still quite a few aftermarket parts available for them. Just do a quick search in the suspension thread and you'll see all the different setups available, and that is just the start.

  3. #3

    2oodoor's Avatar
    Join Date
    Jun 2006
    Vehicle
    86 LX JDM B20A
    Location
    Georgia-lina
    Posts
    9,062

    Re: 3rdGens = Hard to get parts?

    standard parts are readlily available here in US, performance parts are scattered here and there, best source is here IMO too. Junk yards have been a REAL good source for me in my area (Georgia, South carolina) for body, trim, and heavy parts.
    Welcome, and you will enjoy the car. As long as you have a good shell and a good base engine/tranny you will not be spending any more money (probably less) and time on these than you would any 2003 or older Honda. I feel pretty confident in that statement.

  4. #4
    3Geez Veteran MessyHonda's Avatar
    Join Date
    Feb 2006
    Vehicle
    89 LX-i(5speed)
    Location
    Bay Area
    Posts
    22,201

    Re: 3rdGens = Hard to get parts?

    most the the stuff is there....just not alot of selection for our cars....best money i spent was on the suspension.....its so much fun to drive a car that does not look like a 4x4 and handles just as good as a sports car.

    1989 Honda Accord LX-i
    B18c1 swap since 7/2011
    175whp and 132tq
    Redzone tuned

  5. #5
    3Geez Veteran A18A's Avatar
    Join Date
    Sep 2005
    Vehicle
    1988 Honda Vigor
    Location
    New Zealand
    Posts
    8,081

    Re: 3rdGens = Hard to get parts?

    i find that with money, anything is easy to get

  6. #6
    3Geez Veteran
    Join Date
    May 2005
    Vehicle
    89 LXi Sedan (sold) - Car free now, with hella bikes
    Location
    San Jose, CA
    Posts
    5,487

    Re: 3rdGens = Hard to get parts?

    stock parts for repairs are extremely easy to get.. in my area there's at least 5 - 10 3geez in the lot every time i go.

    aftermarket/performance is another story. selection was never very wide on the performance tip and now most of the better stuff is out of production anyways. DIY and 'custom' is the name of the game for a lot of even common mods unless you luck into a rare parts find.
    Last edited by frantik; 03-17-2008 at 01:26 AM.

  7. #7
    DX User
    Join Date
    Mar 2008
    Vehicle
    89' Honda Accord EX-i Coupe
    Location
    Brampton
    Posts
    29

    Re: 3rdGens = Hard to get parts?

    Alright guys thanks for the info

  8. #8
    3Geez Veteran lostforawhile's Avatar
    Join Date
    Dec 2002
    Vehicle
    86 hatchback, 1990 Lincoln Towncar
    Location
    nowhere GA
    Posts
    15,401

    Re: 3rdGens = Hard to get parts?

    hatch parts are very difficult to find,at least here

  9. #9
    DX User Whiter's Avatar
    Join Date
    Sep 2007
    Vehicle
    89 Accord EX-i
    Location
    Toronto
    Posts
    82

    Re: 3rdGens = Hard to get parts?

    hey man take a 30 minute drive to the east end of scarborough get off at meadowvale, go north to old finch road, go left (west) follow that acoss the bayly bridge, at the fork turn left and follow that to Standard Auto Wreckers, ull find my car there next week, any when i needed the power steering assembly for my ride i found 3 89's and all together 6 86-89 accords, but only one fuel injected one, they change up the cars every 2 weeks or so... but they will have atleast one 89 accord or u can sue!

    edit, at the fork turn right!
    cops like pulling me over, or does my car actually look this bad?

Similar Threads

  1. hard to find plastic parts and pieces
    By King Peetis in forum Interior & Exterior Care
    Replies: 43
    Last Post: 02-25-2014, 10:37 PM
  2. Where Do I Find 5 Speed Hard Parts??
    By ArokASE88LXi in forum 3geez Accords
    Replies: 3
    Last Post: 05-12-2009, 05:52 PM
  3. Replies: 0
    Last Post: 02-12-2004, 09:10 AM
  4. It,s not hard to H 22 in a 3 gen
    By Ron Davi,s in forum General Engine Swaps
    Replies: 30
    Last Post: 06-07-2003, 06:56 AM
  5. how hard is it to do this?
    By NOAHS88accord in forum Interior & Exterior Care
    Replies: 3
    Last Post: 02-18-2003, 02:09 AM

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
This website uses cookies
We use cookies to store session information to facilitate remembering your login information, to allow you to save website preferences, to personalise content and ads, to provide social media features and to analyse our traffic. We also share information about your use of our site with our social media, advertising and analytics partners.
     
Links monetized by VigLink