i heard that the b20 head will fit the a20.. true?
A20A3 head question
i heard that the b20 head will fit the a20.. true?
-Tom
1988 4 Door Lx-i 5-speed
364,XXX and counting :]
Originally Posted by 1987AccordLx-i
x2
good god man. Sorry to flame, but Jesus Christ on a piece of toast learn to read. Five minutes in the performance section or with the search button could have gotten you the answer.
Lostforawhile:we have to pick on him he's CAH he spray painted himself into this corner with the accord.
im new to the site so im still learning the features.
-Tom
1988 4 Door Lx-i 5-speed
364,XXX and counting :]
no offence but the search button is just as easy to click as the post new thread button...
welcome to the site but please do seach some before makeing new threads on items allready talked about
Last edited by labeledsk8r; 05-11-2008 at 10:09 PM. Reason: way to tired to type
your answer is no
the question hasnt really been answered YET
will do gentlemen.. thanks for the input
well i guess ill change the thread up a bit.. my efi 87 is running really rough at idle.. idles around 800 then gradually dropps to 500-400 and blows black smoke then shoots up to 800 and smoke stops... does this repeatedly.. any ideas why?
-Tom
1988 4 Door Lx-i 5-speed
364,XXX and counting :]
sounds kinda like a distrubutor problem? my moms minivan would idle like that and kinda backfire, it would go rich and crap (black smoke). it was the distributor.
its not gona be a simple bolt on project so the answer is no lolthe question hasnt really been answered YET
well he asked i it would fit, not if it was simplelol
to bad we could not make a adapter but the compressions dif would suck lol
he asked if a b20 head would fit a a20 block as fare as i know they dont fit lolwell he asked i it would fit, not if it was simple
edit: sorry they fit but dont line up quite right due to oil lines
well from what ive read, the head need some machining and other crap, but it should bolt on... with lots of work...
hmm.. i changed the cap,rotor,wires,plugs and she still does it.. would it be a sensor? thats all i can think of as the rest of the dist. is just the vac advance and the shaft coming from the cam turning the rotor
-Tom
1988 4 Door Lx-i 5-speed
364,XXX and counting :]
correct.. the oil lines dont line up and something about the headbolts not lining up
-Tom
1988 4 Door Lx-i 5-speed
364,XXX and counting :]
does the check engine light come one?? check your ecu for codes... maybe o2 sensors? injectors?
do a fuel filter,air filter,plugs and set the timing etc and see what happens
always worht doin a basic tune as part of a poor running fault.
and check the idle air control valve and see if she workin right
yeah im getting 6 flashes from the ecu.. someone told me that its a temp sensor or something in that area of coolant sensing
-Tom
1988 4 Door Lx-i 5-speed
364,XXX and counting :]
i did the air filter and plugs.. but i do have to swap the fuel filter and get it timed.. im thinking its off a lil.. and when i punch it off the line.. she hesitates then hauls ass
-Tom
1988 4 Door Lx-i 5-speed
364,XXX and counting :]
https://www.3geez.com/forum/showthrea...ighlight=codes
06 LED FLASH(s) 85-98 Accord
ECT Sensor (Engine Coolant Temperature)
defective circuit or unplugged / defective sensor
sweet... so do you know which one it is cuz theres a white one and a green one.. i just wanna buy one.. i dont wanna buy it and it not be the defective one
-Tom
1988 4 Door Lx-i 5-speed
364,XXX and counting :]
i have no clue, sorry...
Posting Permissions
Reply With Quote
Bookmarks