1g DSM Injectors Bluetops

**Rendon LX-i** · 05-18-2008, 04:11 PM

I did my research. I got blue tops and i know they fit directly but would the ecu handle it. or run with a safr.Is there any modifaction u got to do to put em in. I know that the connection part a direct fit. But do the seals got to be redone. If u guys done it let me know with some pics. let me know

**AccordEpicenter** · 05-18-2008, 04:19 PM

you dont need 1g dsm injectors unless your going turbo or dry nitrous kit. If you want to use them you must either go obd1 or get an safc etc

**Rendon LX-i** · 05-19-2008, 05:46 PM

im am running turbo bro...I just want to know so when i do get em in u know. Im runing a T25 turbo. i just want to know if u got to redo the seals or wat not. I know the stock 240 wont handle shit. But let me know man . i also posted some kits of my set up. well just the mani and turbo 2gether

**LiTtLe xOx BitT** · 05-21-2008, 12:08 AM

Originally Posted by Rendon LX-i

im am running turbo bro...I just want to know so when i do get em in u know. Im runing a T25 turbo. i just want to know if u got to redo the seals or wat not. I know the stock 240 wont handle shit. But let me know man . i also posted some kits of my set up. well just the mani and turbo 2gether

they will be fine for a turbo setup, just get a safc controller and a BTM if your not going obd-1 and you will be fine. If your looking for a SAFC controller or a BTM let me know i have both, i also have a set of sonic cleaned and rebuilt 450cc injectors.