what is the bolt size in order to take out the OEM steering wheel?
Removal: steering wheel
what is the bolt size in order to take out the OEM steering wheel?
19mm i think? the same size as the wheel nuts
19mm. i thinkOriginally Posted by JDM A20_Sedan CA5
yup just pop off the lile honda emblem and you will see the nut...im sure its like a 17 or 19mm
1989 Honda Accord LX-i
B18c1 swap since 7/2011
175whp and 132tq
Redzone tuned
its 19, i had to buy a DC powered impact wrench to get it off
you will need an extension to get to it
best way to do it is to have somebody hold the wheel for you...and dont forget to make sure your wheels are straight before you tighten it back on :-p
I never had a problem getting the nut off. Are you all sure it is not 18mm?
I cant remember for sure but I wanted to mention something I have noticed across the board with a LOT of cars. Things related to steering exclusivley have 18mm fasteners where you will seldom ever use 18mm on anything else.
the nut is 19mm ,i just use the wheel wrench that comes with the car works great.
yeah i used a wheel brace too, lol
Another vote for 19mm.
I removed one at the j/y with an open end wrench?
88 LX 5spd l 32/36 weber l KYB GR-2's l Refreshed A20A3 engine l
19mm just did it two weeks ago.
Remeber boys and girls Coupes rule, Hatchies drule, and 4 doors are for mothers..........
19mm for sure. I had to take mine off like 3 times. Get some white out and mark the steering wheel with the column so you can line it back up.
Sam
1989 Accord LX: Sold with 208k-now somewhere around 230k with new owner
Current:
2014 Elantra Sport 6MT
2000 Montero Sport 4x4 (beater, trail rig)
Posting Permissions
Reply With Quote
Bookmarks