Page 1 of 7 12345 ... LastLast
Results 1 to 25 of 168

Thread: Roodoo2 LX Sedan B20 IN!

  1. #1

    2oodoor's Avatar
    Join Date
    Jun 2006
    Vehicle
    86 LX JDM B20A
    Location
    Georgia-lina
    Posts
    9,062

    Roodoo2 LX Sedan B20 IN!

    It is in, but the front mount has a dowel in it that I do not think there is a hole for. I am not positive yet so I left the nuts off the mount until I can get under there. It seems to sit pretty strieght otherwise, knowing it is a little high on the front mount.
    [IMG][/IMG]
    Nice and clean engine compartment , thanks to citrus orange degreaser, and followed up with gunk engine cleaner.
    [IMG][/IMG]
    Old A20A1, it runs great, going to put it back in something soon
    [IMG][/IMG]
    A pay off for a long hot days work, it's in but still a long way to go
    [IMG][/IMG]



  2. #2
    3Geez Veteran A18A's Avatar
    Join Date
    Sep 2005
    Vehicle
    1988 Honda Vigor
    Location
    New Zealand
    Posts
    8,081

    Re: Roodoo2 B20 IN!

    cool beans

  3. #3
    SEi User 86ccord's Avatar
    Join Date
    Nov 2007
    Location
    Middle Georgia USA
    Posts
    1,479

    Re: Roodoo2 B20 IN!

    Word. i want a b20
    one day I'll return.

  4. #4
    DX User irondragon013's Avatar
    Join Date
    Nov 2006
    Vehicle
    2010/Honda/Civic Si
    Location
    Augusta
    Posts
    90

    Re: Roodoo2 B20 IN!

    That was quick. Good work man. I want a ride in it when you get it running.

  5. #5
    2ndGenGuy
    Guest

    Re: Roodoo2 B20 IN!

    Nice work man! Do I assume correctly that that A20 intake manifold is going to go on the B20?

  6. #6
    3Geez Veteran Civic Accord Honda's Avatar
    Join Date
    Aug 2006
    Vehicle
    1995 Civic/ 1988 CRX
    Location
    Tehachapi Ca
    Posts
    13,103

    Re: Roodoo2 B20 IN!

    nice!!!!!

    1988 Honda Accord LX-i Coupe 123k miles.

  7. #7
    3Geez Veteran Pico's Avatar
    Join Date
    Dec 2005
    Vehicle
    88 LX-i Hatch (Sold),1989 LX-i Sedan (Sold), 88 LX-i Sedan (Sold), 89 LX-i Sedan (RIP)
    Location
    Vallejo, CA.
    Posts
    6,338

    Re: Roodoo2 B20 IN!

    I'm Jealous....
    Great Work Roodoo

  8. #8
    3Geez Veteran MessyHonda's Avatar
    Join Date
    Feb 2006
    Vehicle
    89 LX-i(5speed)
    Location
    Bay Area
    Posts
    22,201

    Re: Roodoo2 B20 IN!

    i wish i had time to do a b20 swap...yours looks great

    1989 Honda Accord LX-i
    B18c1 swap since 7/2011
    175whp and 132tq
    Redzone tuned

  9. #9

    2oodoor's Avatar
    Join Date
    Jun 2006
    Vehicle
    86 LX JDM B20A
    Location
    Georgia-lina
    Posts
    9,062

    Re: Roodoo2 B20 IN!

    thanks for the cheers !
    This has been a scary project for me, not the work really but not knowing how this power plant is going to work out. I took out a good running motor and tranny. Good thing is this motor fits in just like oem so I won't have to cut anything so I can always put it back like it was and be ok.
    Ive had it since March 08 so, naw it wasn't so quick to go in..lol
    There is a long way to go yet, getting the mounts right, figuring out how to use this kind of auto tx, replace the selector cable, getting a trans cooler, plugging off a dozen coolant hoses I wont use, setting up the 38/38 intake and carb, putting in the d16 teg dizzy, making the left side cv axle, arghhhh too much to list.

    One cool thing is this motor looks huge sitting next to the A20, and it fills up the engine compartment.. looks totally different. Seems like the power steering pump will be a lot tighter fit too.

  10. #10

    AccordB20A's Avatar
    Join Date
    Sep 2005
    Vehicle
    1987 Honda Accord 2.0Si
    Location
    Stratford, New Zealand
    Posts
    7,407

    Re: Roodoo2 B20 IN!

    cool! hope it runs fine

  11. #11


    Join Date
    Sep 2004
    Vehicle
    ???? ????? ???? ?? ???
    Location
    On Hiatus
    Posts
    4,276

    Re: Roodoo2 B20 IN!

    Looking Good!

    It will interesting to see a Weber B20
    2004-2011?

  12. #12

    bullard123's Avatar
    Join Date
    Nov 2003
    Vehicle
    1988 Hatch LXI
    Location
    COLORADO SPRINGS
    Posts
    2,942

    Re: Roodoo2 B20 IN!

    Good progress! I think you will be the first auto B20A in a while. I remember when I was at that stage as well. This has got to be the year of the B20's!

  13. #13

    2oodoor's Avatar
    Join Date
    Jun 2006
    Vehicle
    86 LX JDM B20A
    Location
    Georgia-lina
    Posts
    9,062

    Re: Roodoo2 B20 IN!

    Quote Originally Posted by bullard123 View Post
    Good progress! I think you will be the first auto B20A in a while. I remember when I was at that stage as well. This has got to be the year of the B20's!
    yeah the writing was on the wall Exile, you, mykwikcoupe, tooloud, ( who else? )got motors in this year.
    I started another thread about these automatics, if anybody knows where I can get info on jdm autos please post it. This one has shift or lockup solenoids on top of the tranny, with fluiid passages under them. I am not using ECU or TCM with my plans. Wohdog says he just wired his hot with the key on, constant on and his ran ok, he said as long as the throttle valve cable was adjusted right. That is what has me baffled, why would it need solenoids. I can't find anything on these, most info is 90 and up where the solenoids absolutley were needed to control shifts

  14. #14


    Join Date
    May 2002
    Vehicle
    1989 Accord SEI Coupe, 08 Ford E-250
    Location
    S.Glastonbury, CT
    Posts
    3,795

    Re: Roodoo2 B20 IN!

    Congratulations.....Yeah there seems to be a lot more swaps popping up here lately. I noticed the last two B20A's i have seen lean pretty bad to one side. I looked at mine and it sits level side to side so im curious to why that is perhaps a wrong mount?

  15. #15

    2oodoor's Avatar
    Join Date
    Jun 2006
    Vehicle
    86 LX JDM B20A
    Location
    Georgia-lina
    Posts
    9,062

    Re: Roodoo2 B20 IN!

    Had to use the A20 front mount. At first I just flipped the rubber frame part around so the dowel pin would fit, then the stud on the rubber mount was too short so the other one worked perfect. No lean that I can tell but then the car is in close quarters so it is hard to look at.
    [IMG][/IMG]
    The belt looks and feels kinda loose to me, I pulled the cover off to line up TDC to install the D16zc teggy distributor.
    [IMG][/IMG]
    need to plug off a LOT of coolant ports, & EGR gone !
    [IMG][/IMG]
    As you can see I have a lot of loose ends and thing to deal with yet. I spent extra time getting around wrung off bolt on the trans mount. Finally just took an 11mm socket and hammered it on the wrung out 12, worked like a charm after digging up five other 12 sockets to get a tighter one.
    Last edited by 2oodoor; 07-27-2008 at 01:14 PM.

  16. #16
    SEi User Hauntd ca3's Avatar
    Join Date
    Sep 2007
    Vehicle
    1988 ca3 si exclusive
    Location
    new zealand
    Posts
    1,878

    Re: Roodoo2 B20 IN!

    that belt duz look a touch loose eh
    wouldnt be starting her up til you do a belt/tensioner etc
    my b20 leans toward the left a bit
    duno why

  17. #17
    SEi User 86ccord's Avatar
    Join Date
    Nov 2007
    Location
    Middle Georgia USA
    Posts
    1,479

    Re: Roodoo2 B20 IN!

    Quote Originally Posted by Hauntd ca3 View Post
    that belt duz look a touch loose eh
    wouldnt be starting her up til you do a belt/tensioner etc
    my b20 leans toward the left a bit
    duno why
    yeah, alot of them seem to lean a bit..
    one day I'll return.

  18. #18
    3Geez Veteran A18A's Avatar
    Join Date
    Sep 2005
    Vehicle
    1988 Honda Vigor
    Location
    New Zealand
    Posts
    8,081

    Re: Roodoo2 B20 IN!

    the belts on mine are like that too, i think its just something to do with the valve springs turning the exhaust cam backwards when the engine stops. I wouldn't worry about it
    Last edited by A18A; 07-28-2008 at 06:10 AM.

  19. #19
    3Geez Veteran Pico's Avatar
    Join Date
    Dec 2005
    Vehicle
    88 LX-i Hatch (Sold),1989 LX-i Sedan (Sold), 88 LX-i Sedan (Sold), 89 LX-i Sedan (RIP)
    Location
    Vallejo, CA.
    Posts
    6,338

    Re: Roodoo2 B20 IN!

    I'm Jealous.
    Wish I had the time and $$ to get a B20 for my ride.
    Looking good Roodoo

  20. #20


    Join Date
    May 2002
    Vehicle
    1989 Accord SEI Coupe, 08 Ford E-250
    Location
    S.Glastonbury, CT
    Posts
    3,795

    Re: Roodoo2 B20 IN!

    Im guessing the lean is coming from using different mounts since there is a few different ones floating around. I was using the steel front mount on mine but i do have a brand new cast one that i ordered from Japan. I thought i read that there was a slight difference with the front mounts JDM to USDM but don't quote me on that.

    Well good luck!

  21. #21

    2oodoor's Avatar
    Join Date
    Jun 2006
    Vehicle
    86 LX JDM B20A
    Location
    Georgia-lina
    Posts
    9,062

    Re: Roodoo2 B20 IN!

    The reason the cast one would not work was just the stud on the car's front mount was too short to give any threads.
    Well I had a chance to work on it some today, hard though it was extremely thick and hot out today so every hour feels like three.
    I hung the tranny on the hoist and removed the cross brace, two mounts, and dust sheild to install the shift selector cable. It went relatively quick since I used a step down to 3/8 adapter on my el cheapo pep boys 1/2 inch cordless impact.
    I pulled the plugs out so I could turn it over by hand, I might have turned it backwards some, not sure which way to turn the crank with the rachet. Shot some marvel mystery oil in the holes to let it work I need to spin it over soon to put up some oil pressure.
    Do importers put something in the starter bolt holes? there was this white petrified dog doo stuff plugging both holes. I shot some pb blaster to loosen it up so I can clean the threads.

  22. #22

    2oodoor's Avatar
    Join Date
    Jun 2006
    Vehicle
    86 LX JDM B20A
    Location
    Georgia-lina
    Posts
    9,062

    Re: Roodoo2 B20 IN!

    Speed sensor question: does the fact that the transmission is JDM affect the ability for the speed sensor pulser on the tranny to signal the speedometer in MPH and not KPH. IN other words should I change out the one off my old transmission so the speedmeter reads right ?

  23. #23
    3Geez Veteran A18A's Avatar
    Join Date
    Sep 2005
    Vehicle
    1988 Honda Vigor
    Location
    New Zealand
    Posts
    8,081

    Re: Roodoo2 B20 IN!

    should be jdm tyte and use a 180kph speedo (Y)

  24. #24
    LXi User EX-ileAccord's Avatar
    Join Date
    Feb 2005
    Vehicle
    89 accord EX-i 88 accord hatch s
    Location
    NS, Canada
    Posts
    522

    Re: Roodoo2 B20 IN!

    awesome man! enjoy it.

  25. #25


    Join Date
    May 2002
    Vehicle
    1989 Accord SEI Coupe, 08 Ford E-250
    Location
    S.Glastonbury, CT
    Posts
    3,795

    Re: Roodoo2 B20 IN!

    I think i had to use my USDM speed sensor because the JDM one was not calibrated the same.

Similar Threads

  1. Roodoo2 has a new...
    By 2oodoor in forum Classic Honda Pics & Videos
    Replies: 66
    Last Post: 07-15-2013, 09:05 PM
  2. Roodoo2 LX Sedan B20 IN!
    By 2oodoor in forum JDM B18A / B20A Swap Tech
    Replies: 157
    Last Post: 09-29-2009, 07:46 AM
  3. Am at roodoo2's right now
    By lostforawhile in forum Classic Honda Community Chat
    Replies: 32
    Last Post: 03-10-2009, 03:24 AM

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
This website uses cookies
We use cookies to store session information to facilitate remembering your login information, to allow you to save website preferences, to personalise content and ads, to provide social media features and to analyse our traffic. We also share information about your use of our site with our social media, advertising and analytics partners.
     
Links monetized by VigLink