i hate my car luck

[Dr_Snooz]

and gor some reason... the passenger side on the front is about 1/2" higher i dont know why.. i took it all apart and put it back together.. its setup the same as the driver side... maybe it just needs to settle... :S

You didn't just drop the car and measure clearance, right? Clearances will be all crazy if you lower the jack and measure. You want to roll it a bit so the wheels can spread out.

[skylinegts]

thats after a 400km drive home

[Dr_Snooz]

thats after a 400km drive home

Ah, well then, I'm out of suggestions.

[skylinegts]

ok.. so i took both front shocks out again today.. pulled them apart.. put them back together again.. they are together identical...everything is identical on both sides. lowered it.. and as soon as i got on the road.. it settled back to 2.25" drivers side 1.5" passenger side.. im SOOO pissed at these ST springs. my friend got some for his teg at the same time i got mine. we called ST just to double check.. and they sent him the right springs.. and he installed them right... they actually raised the car 1" over stock... was supposed to be a 1" drop. well since i dont have the stock springs.. time to search for another set and return these to lordco

[snoopyloopy]

lolol are you SURE you didn't put them on sideways aka one front and one rear in the back?

[skylinegts]

lol
haha
your funny.
the fronts are on only. back is still stock.and they are different size springs. backs wont fit in the front.