Page 1 of 2 12 LastLast
Results 1 to 25 of 28

Thread: Feeler for possible sale of Konis/H&R Springs

  1. #1


    Join Date
    May 2002
    Vehicle
    1989 Accord SEI Coupe, 08 Ford E-250
    Location
    S.Glastonbury, CT
    Posts
    3,795

    Feeler for possible sale of Konis/H&R Springs

    Im thinking about steeping it up to a full body coilover and considering parting with my Koni Red Struts and H&R 1.5 Springs as a set. If anyone is interested shoot some offers or ballpark on what you would pay for them. You can see what the drop looks like in my 3geez garage beware the picture might have my B20A in it so the front might look higher than when the A20A3 was in it because of the weight difference.

    This is not a 100% done deal but im really considering the sale to offset the high cost of the coilovers i want and push this project forward. Plus im hesitant to sell them because obviously you can't buy Koni's any longer.



  2. #2


    Join Date
    Dec 2003
    Vehicle
    89 Honda Accord LXi, Coupe & Sedan
    Location
    Millington, TN
    Posts
    3,038

    Re: Feeler for possible sale of Konis/H&R Springs

    How many miles do you have on them?
    Phil

  3. #3


    Join Date
    May 2002
    Vehicle
    1989 Accord SEI Coupe, 08 Ford E-250
    Location
    S.Glastonbury, CT
    Posts
    3,795

    Re: Feeler for possible sale of Konis/H&R Springs

    I was trying to figure it out last night but im not sure im thinking 20,000 miles. I want to say less than that because i use to have Tokico's in the car on other springs. They feel good and firm still so i would not be concerned with a rebuild. However you can have them rebuilt and Koni will also make them externally double adjustable which seem to work really well as i have rode in Steve G's car and its nice and firm matched with his custom spring rate ground control's.

  4. #4


    Join Date
    Dec 2003
    Vehicle
    89 Honda Accord LXi, Coupe & Sedan
    Location
    Millington, TN
    Posts
    3,038

    Re: Feeler for possible sale of Konis/H&R Springs

    Wow, then they just got broke in. Had you put this up last month I'd been all over it. But I think I've just spent the last of my mad money for the year.
    Phil

  5. #5

    Tomisimo's Avatar
    Join Date
    Sep 2006
    Vehicle
    Honda Accord's EXi #1 [A20a4] R.I.P & #2 [B20a2]
    Location
    Norway/Europe
    Posts
    1,794

    Re: Feeler for possible sale of Konis/H&R Springs

    I'd love to, but my pockets is not that deep anymore. I've spend like ton of money last months. I'd pay you 500$ for whole set up. but only next month I might consider.

    Its prttey fnuny how you can raed tihs eintre snetnece with all tehse ellters out of palce...

    My Build Thread

  6. #6


    Join Date
    May 2002
    Vehicle
    1989 Accord SEI Coupe, 08 Ford E-250
    Location
    S.Glastonbury, CT
    Posts
    3,795

    Re: Feeler for possible sale of Konis/H&R Springs

    I will keep you in mind im trying to get a feeler but im leaning more on going full coilovers which are not in my budget but i really want them. So i will keep this open and get back to you in a month or so.

  7. #7

    Tomisimo's Avatar
    Join Date
    Sep 2006
    Vehicle
    Honda Accord's EXi #1 [A20a4] R.I.P & #2 [B20a2]
    Location
    Norway/Europe
    Posts
    1,794

    Re: Feeler for possible sale of Konis/H&R Springs

    Good, I late you know after my next pay check, if I have some spear money to spend.

    Its prttey fnuny how you can raed tihs eintre snetnece with all tehse ellters out of palce...

    My Build Thread

  8. #8
    3Geez Veteran
    Join Date
    May 2005
    Vehicle
    89 LXi Sedan (sold) - Car free now, with hella bikes
    Location
    San Jose, CA
    Posts
    5,487

    Re: Feeler for possible sale of Konis/H&R Springs

    i just want the rear konis if someone else is interested in the fronts + sprints maybe we can split them (assuming they go up for sale)

  9. #9


    Join Date
    May 2002
    Vehicle
    1989 Accord SEI Coupe, 08 Ford E-250
    Location
    S.Glastonbury, CT
    Posts
    3,795

    Re: Feeler for possible sale of Konis/H&R Springs

    I will be selling them as a whole set for sure if i do sell them and i have two legitamate offers on the table.

  10. #10
    3Geez Veteran MessyHonda's Avatar
    Join Date
    Feb 2006
    Vehicle
    89 LX-i(5speed)
    Location
    Bay Area
    Posts
    22,201

    Re: Feeler for possible sale of Konis/H&R Springs

    hum not bad

    1989 Honda Accord LX-i
    B18c1 swap since 7/2011
    175whp and 132tq
    Redzone tuned

  11. #11

    snoopyloopy's Avatar
    Join Date
    Sep 2004
    Vehicle
    1988 Accord LX-i Sedan; 1998 BMW 540i/6
    Location
    Killa Cali
    Posts
    3,787

    Re: Feeler for possible sale of Konis/H&R Springs

    yeah, i'm in the same boat as frantik but i'm willing to take the whole set...

  12. #12
    DX User
    Join Date
    Aug 2008
    Vehicle
    1987 Accord LX-i
    Location
    Erie, Colorado
    Posts
    10

    Re: Feeler for possible sale of Konis/H&R Springs

    $500 doesn't seem unreasonable. Perhaps a bit more if necessary...

    Cheers,
    Jeremy

  13. #13


    Join Date
    May 2002
    Vehicle
    1989 Accord SEI Coupe, 08 Ford E-250
    Location
    S.Glastonbury, CT
    Posts
    3,795

    Re: Feeler for possible sale of Konis/H&R Springs

    Im working on getting Teins but it seems they rape you to split a set up. The SS line runs $1200 but they want $2000 to split up a set so im working on it. If i sell my koni's its either gonna be in the next 2 months or next spring if its going to happen.

  14. #14
    DX User
    Join Date
    Aug 2008
    Vehicle
    1987 Accord LX-i
    Location
    Erie, Colorado
    Posts
    10

    Re: Feeler for possible sale of Konis/H&R Springs

    I didn't see that Tein had a 3G Accord application. Would one of their other products work, and with what sort of modification? And I'm curious why you'd want to split up a set?

    Cheers,
    Jeremy

  15. #15


    Join Date
    May 2002
    Vehicle
    1989 Accord SEI Coupe, 08 Ford E-250
    Location
    S.Glastonbury, CT
    Posts
    3,795

    Re: Feeler for possible sale of Konis/H&R Springs

    They dont make anything for 3rd gen accord you will have to see Legendmaster's post. He used coilovers from two different honda makes to get a set but its hard to find a decent manufacturer that will break up sets like that. I called Tein today and it looks like that fell through because they won't break up kits according to that tech (seemed like he was trying to avoid my request).

  16. #16


    Join Date
    Dec 2003
    Vehicle
    89 Honda Accord LXi, Coupe & Sedan
    Location
    Millington, TN
    Posts
    3,038

    Re: Feeler for possible sale of Konis/H&R Springs

    Quote Originally Posted by RobT5580 View Post
    Im working on getting Teins but it seems they rape you to split a set up. The SS line runs $1200 but they want $2000 to split up a set so im working on it. If i sell my koni's its either gonna be in the next 2 months or next spring if its going to happen.

    What application are you looking at?
    Phil

  17. #17
    3Geez Veteran
    Join Date
    May 2005
    Vehicle
    89 LXi Sedan (sold) - Car free now, with hella bikes
    Location
    San Jose, CA
    Posts
    5,487

    Re: Feeler for possible sale of Konis/H&R Springs

    Quote Originally Posted by RobT5580 View Post
    I will be selling them as a whole set for sure if i do sell them and i have two legitamate offers on the table.
    well it's not likely to happen but if it did me and whoever split it would just deal with parting them out.. you'd still sell as a whole set to one of us or whatever

  18. #18

    Tomisimo's Avatar
    Join Date
    Sep 2006
    Vehicle
    Honda Accord's EXi #1 [A20a4] R.I.P & #2 [B20a2]
    Location
    Norway/Europe
    Posts
    1,794

    Re: Feeler for possible sale of Konis/H&R Springs

    Ppl Ppl. Those Konis is mine if he ever going to sell them No hard feelings but I was first to offer the price and I'm sticking with it, I'll pay more if needed. I'm building a custom Accord so I need them.

    Its prttey fnuny how you can raed tihs eintre snetnece with all tehse ellters out of palce...

    My Build Thread

  19. #19
    DX User
    Join Date
    Aug 2008
    Vehicle
    1987 Accord LX-i
    Location
    Erie, Colorado
    Posts
    10

    Re: Feeler for possible sale of Konis/H&R Springs

    Quote Originally Posted by Tomisimo View Post
    Ppl Ppl. Those Konis is mine if he ever going to sell them No hard feelings but I was first to offer the price and I'm sticking with it, I'll pay more if needed. I'm building a custom Accord so I need them.
    Well, if you feel that strongly about it, I guess I can just get some revalved Bilsteins!

    Cheers,
    Jeremy

  20. #20

    Tomisimo's Avatar
    Join Date
    Sep 2006
    Vehicle
    Honda Accord's EXi #1 [A20a4] R.I.P & #2 [B20a2]
    Location
    Norway/Europe
    Posts
    1,794

    Smile Re: Feeler for possible sale of Konis/H&R Springs

    ^^ cheers ^^

    Its prttey fnuny how you can raed tihs eintre snetnece with all tehse ellters out of palce...

    My Build Thread

  21. #21


    Join Date
    May 2002
    Vehicle
    1989 Accord SEI Coupe, 08 Ford E-250
    Location
    S.Glastonbury, CT
    Posts
    3,795

    Re: Feeler for possible sale of Konis/H&R Springs

    Well don't get your hopes up just yet i didn't have any luck with tein so im looking at other options but its not looking great. Worse case i will have to try another brand but if i have to do that i definately will try them before i sell my current setup. I had high hopes for the teins and was willing to rely on them being well suited that i would have sold my setup before hand plus it was gonna help pay for the Teins.

    And Frantic that would be fine but i highly doubt anyone here would shell out $1200+ for a coilover setup. Plus i can't blow money like i use to LOL.

  22. #22
    3Geez Veteran MessyHonda's Avatar
    Join Date
    Feb 2006
    Vehicle
    89 LX-i(5speed)
    Location
    Bay Area
    Posts
    22,201

    Re: Feeler for possible sale of Konis/H&R Springs

    how about some skunk2?

    1989 Honda Accord LX-i
    B18c1 swap since 7/2011
    175whp and 132tq
    Redzone tuned

  23. #23

    snoopyloopy's Avatar
    Join Date
    Sep 2004
    Vehicle
    1988 Accord LX-i Sedan; 1998 BMW 540i/6
    Location
    Killa Cali
    Posts
    3,787

    Re: Feeler for possible sale of Konis/H&R Springs

    Quote Originally Posted by Tomisimo View Post
    Ppl Ppl. Those Konis is mine if he ever going to sell them No hard feelings but I was first to offer the price and I'm sticking with it, I'll pay more if needed. I'm building a custom Accord so I need them.
    fair enough, i suppose. i really only want the backs, as i have a brand new set of fronts and some springs already so i'd resell the parts i don't need. but if anyone spies some backs, lmk.

  24. #24

    carotman's Avatar
    Join Date
    Jul 2000
    Vehicle
    89 Accord LX/B20A | 87 Accord Hatch "S" Stock | 94 Civic Hatch CX
    Location
    Montreal South Shore
    Posts
    9,984

    Re: Feeler for possible sale of Konis/H&R Springs

    Well, it's not like sets are welded together at the factory... They're just being lazy

    Have you explained that they could just list this "split set" as a set made for the 86-89 Accords? It's not like you want something unusual here. They already make the parts, they just don't offer them as a pre-packaged item.

    http://pages.videotron.com/omus
    3geez member since July 12 2000

    I need these parts!
    https://www.3geez.com/forum/showthread.php?t=67742

  25. #25


    Join Date
    May 2002
    Vehicle
    1989 Accord SEI Coupe, 08 Ford E-250
    Location
    S.Glastonbury, CT
    Posts
    3,795

    Re: Feeler for possible sale of Konis/H&R Springs

    The rep was beating around the bush and told me to call in early 2009 where they will have a new program. But it sounded like they wanted measurements off your existing stuff and they work off of that. He was adamant that they will not break up a set. My only thoughts on that is because they are produced in Japan but its not that hard to fix that.

    Im looking at other options at the moment but i had high hopes of getting Teins but not for $2400.

Similar Threads

  1. Just a feeler thread for the sale of my car
    By codyJDM in forum Classic Honda Community Chat
    Replies: 38
    Last Post: 09-27-2008, 10:38 AM
  2. Never used KONIS for sale
    By NOAHS88accord in forum Trading Post
    Replies: 17
    Last Post: 04-07-2004, 01:32 AM
  3. Konis and springs out of a 1st gen Legend?
    By rcbk in forum Suspension/Wheels/Tires/Brakes
    Replies: 2
    Last Post: 02-08-2004, 09:39 PM
  4. B&G springs for sale
    By bgaccord in forum Trading Post
    Replies: 18
    Last Post: 11-03-2003, 12:30 PM

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
This website uses cookies
We use cookies to store session information to facilitate remembering your login information, to allow you to save website preferences, to personalise content and ads, to provide social media features and to analyse our traffic. We also share information about your use of our site with our social media, advertising and analytics partners.
     
Links monetized by VigLink