Page 1 of 2 12 LastLast
Results 1 to 25 of 28

Thread: EK Build Up and Engine Swap - '78 Civic

  1. #1
    LX User redr2's Avatar
    Join Date
    Oct 2007
    Vehicle
    '78 Honda Civic with Accod Motor
    Location
    Chilliwack, BC
    Posts
    106

    EK Build Up and Engine Swap - '78 Civic

    After meeting up with John (2ndGenGuy) last weekend, I thought I would share a little bit of what I have been up to over the last few months. I blew a head gasket last September in my EL motor so I figured I would upgrade the whole thing:

    I went with a rebuilt ‘81 EK bored 40 over.

    I sent my ‘81 EL head down to Maloof Racing in Duluth, Georgia and let Bryan Maloof work his magic. The work consisted of: new bronze guides, custom oversized stainless steel intake and exhaust valves, new Crower springs, Ferrea titanium retainers and Mitusbishi valve locks. The valves were made to use Mitsubishi locks and retainers to get rid of the old style "tractor" locks the early Hondas used.

    The quench side of the head was welded to gain some HP and much needed swirl to get complete combustion. Basically, it was welded into a heart shape and it had the added benefit of boosting compression w/o having to shave too much off the head. With the head shave and planing of the block the final compression is about 10.6:1 For the time being, I am running a Colt cam with a mild street grind (it’s a profile that I hate). Through the winter I hope to have a hard face welded cam done up once I figure out a better profile.

    I upgraded to a custom adjustable cam gear and with the larger displacement and better flow I increased the size of the venturis in my Dellortos to 32mm from the 30 mm ones I was using with the EL. The engine was bolted up to my 82-83 GK 5 speed transmission with a lightened fly wheel (approx 11 pounds).

    By July I finally had the engine mounted in my ‘78 Civic. The engine pulls really hard up top and will basically pull until it blows. I really do hate the cam though, and will likely swap back to a stock cam until I figure out a better profile. For now, I am just waiting on some air filters, and am considering having the distributor re-curved through the winter.

    Here are some pics:









    Last edited by redr2; 09-24-2008 at 08:20 PM. Reason: more pics



  2. #2
    LX User redr2's Avatar
    Join Date
    Oct 2007
    Vehicle
    '78 Honda Civic with Accod Motor
    Location
    Chilliwack, BC
    Posts
    106

    Re: EK Build Up and Engine Swap - '78 Civic

    Remaining Pics:









    Last edited by redr2; 09-24-2008 at 08:20 PM.

  3. #3
    LX User redr2's Avatar
    Join Date
    Oct 2007
    Vehicle
    '78 Honda Civic with Accod Motor
    Location
    Chilliwack, BC
    Posts
    106

    Re: EK Build Up and Engine Swap - '78 Civic

    Remaining Pics:




  4. #4
    2.0Si User Hazwan's Avatar
    Join Date
    Feb 2006
    Vehicle
    86 Honda Prelude
    Location
    Malaysia
    Posts
    3,846

    Re: EK Build Up and Engine Swap - '78 Civic

    Holy shit! That car is going to fly!

    We need videos!!

    1986 Honda Prelude build thread
    1981 Honda Accord (sold)

  5. #5
    LXi User 79cord's Avatar
    Join Date
    Oct 2006
    Vehicle
    79 Accord hatch, 89 CR-X SiR, '74 Z360 h/top, '81 prelude, '65 S600
    Location
    Melb, Aust.
    Posts
    808

    Re: EK Build Up and Engine Swap - '78 Civic

    Valve sizes compared to 82/3 valves ?
    & were the special valves required for the alternative retainers?
    Looks stunning (& expensive), very impressive head reworking.
    Good to be reminded what can be done with the old engines & how much more potential they can have. (a shame they weigh so much)

  6. #6
    LX User redr2's Avatar
    Join Date
    Oct 2007
    Vehicle
    '78 Honda Civic with Accod Motor
    Location
    Chilliwack, BC
    Posts
    106

    Re: EK Build Up and Engine Swap - '78 Civic

    Yes, the valves are larger but I do not know how much....these are the largest that will fit in there....and yes they are custom to work....

    I will likely have to wait until next summer for a dyno run and time slip...hopefully by then I can have the new header, cam and re-curved distributor installed.

    Here is the intake valve:


  7. #7
    3Geez Veteran MessyHonda's Avatar
    Join Date
    Feb 2006
    Vehicle
    89 LX-i(5speed)
    Location
    Bay Area
    Posts
    22,201

    Re: EK Build Up and Engine Swap - '78 Civic

    oh wow that motor looks sweet

    1989 Honda Accord LX-i
    B18c1 swap since 7/2011
    175whp and 132tq
    Redzone tuned

  8. #8
    2ndGenGuy
    Guest

    Re: EK Build Up and Engine Swap - '78 Civic

    Yeah! I know I've commented in your other threads already but I'll say it again... your car pulls like mad! I love it. Can't wait to see some dyno times. I think with all that work, you should try some 40's on that engine too. Especially being nearly 1800CC now as well. Thanks again for the ride!

  9. #9
    LX User redr2's Avatar
    Join Date
    Oct 2007
    Vehicle
    '78 Honda Civic with Accod Motor
    Location
    Chilliwack, BC
    Posts
    106

    Re: EK Build Up and Engine Swap - '78 Civic

    Quote Originally Posted by 2ndGenGuy View Post
    Yeah! I know I've commented in your other threads already but I'll say it again... your car pulls like mad! I love it. Can't wait to see some dyno times. I think with all that work, you should try some 40's on that engine too. Especially being nearly 1800CC now as well. Thanks again for the ride!
    Thanks The carbs are DHLA 40's but I have them choked down to 32mm. I guess, I should try some larger ones some day but it gets really expensive matching the jets with the larger venturis each time. Dellorto parts are not easy to get around here so I have been ordering the parts out of a contact of mine in Italy

  10. #10
    LX User haridev's Avatar
    Join Date
    Aug 2008
    Vehicle
    81' Accord EX
    Location
    Ipoh, Malaysia
    Posts
    175

    Re: EK Build Up and Engine Swap - '78 Civic

    that is a really sick machine!!! a pocket rocket if i might add. in addition to the dyno, it would be awesome to view her performance on youtube! i bet the engine costs $$$$ well, i guess its all worth it...heh
    Last edited by haridev; 09-26-2008 at 11:35 AM.
    life is only what you make of it...


    my dad with our 81' accord...

    Honda Accord 1981
    Mercedes 190E 1988
    Volkwagen 1200 1971

    MSN: [email protected]
    YM: [email protected]

  11. #11
    LX User redr2's Avatar
    Join Date
    Oct 2007
    Vehicle
    '78 Honda Civic with Accod Motor
    Location
    Chilliwack, BC
    Posts
    106

    Re: EK Build Up and Engine Swap - '78 Civic

    I do have a video of it while running the EL motor and my dual Dellorto carbs. Have not done a new one yet though.

    http://videos.streetfire.net/video/7...d-in_36495.htm

    It was expensive but fortunately for me I have a lot of contacts and no one was in it to make money off me so I squeaked by pretty easy.

  12. #12
    LX User 81vintyminty's Avatar
    Join Date
    Sep 2008
    Vehicle
    1981 HONDA ACCORD 4dr
    Location
    SoCAL
    Posts
    177

    Re: EK Build Up and Engine Swap - '78 Civic

    thats just awesome.. great work.

  13. #13
    LX User redr2's Avatar
    Join Date
    Oct 2007
    Vehicle
    '78 Honda Civic with Accod Motor
    Location
    Chilliwack, BC
    Posts
    106

    Re: EK Build Up and Engine Swap - '78 Civic

    Last edited by redr2; 12-28-2008 at 11:04 PM.

  14. #14
    DX User eduardo i.'s Avatar
    Join Date
    Jul 2009
    Location
    carolina, puertorico
    Posts
    86

    Re: EK Build Up and Engine Swap - '78 Civic

    you can see more of his car in his site( signature) also 1stgencivic( im a member there too)

  15. #15
    LX User redr2's Avatar
    Join Date
    Oct 2007
    Vehicle
    '78 Honda Civic with Accod Motor
    Location
    Chilliwack, BC
    Posts
    106

    Re: EK Build Up and Engine Swap - '78 Civic

    no more swaps planned for now. One day I will swap in a D16 but still having fun with this one!

  16. #16
    DX User eduardo i.'s Avatar
    Join Date
    Jul 2009
    Location
    carolina, puertorico
    Posts
    86

    Re: EK Build Up and Engine Swap - '78 Civic

    Will do the same here, until parts get too hard to find.D series parts are everywhere for cheap

  17. #17
    LX User 1GCustomAccord's Avatar
    Join Date
    Jun 2008
    Vehicle
    79´Accord,83´Lude,71´Nova coupe,83´Pontiac 6000,69 Mustang coupe,and many more rusted crap...
    Location
    PY
    Posts
    350

    Re: EK Build Up and Engine Swap - '78 Civic

    Amazing! I am waiting to have some time to complete my new engine and this thread is full of good ideas. I didnt know that head job was even possible. Really amazing, but i wonder if that heart-shaped chamber makes any difference at all or is just the compression boost? Maybe i can do a similar job on my head but i dont want to boost compression too much, for easy compression boost, i will use flat pistons, i dont know how much compression i will have if i add material to the chamber. What do you think Redr2?
    So many reasons why
    I won't be sending postcards
    From Paraguay

  18. #18
    DX User EM1 ADCT's Avatar
    Join Date
    Aug 2010
    Vehicle
    '80 Honda Prelude XR
    Location
    Virginia
    Posts
    49

    Re: EK Build Up and Engine Swap - '78 Civic

    Thumbs up!

  19. #19
    LX User redr2's Avatar
    Join Date
    Oct 2007
    Vehicle
    '78 Honda Civic with Accod Motor
    Location
    Chilliwack, BC
    Posts
    106

    Re: EK Build Up and Engine Swap - '78 Civic

    Quote Originally Posted by 1GCustomAccord View Post
    Amazing! I am waiting to have some time to complete my new engine and this thread is full of good ideas. I didnt know that head job was even possible. Really amazing, but i wonder if that heart-shaped chamber makes any difference at all or is just the compression boost? Maybe i can do a similar job on my head but i dont want to boost compression too much, for easy compression boost, i will use flat pistons, i dont know how much compression i will have if i add material to the chamber. What do you think Redr2?
    Mine runs at about 10.6:1 as a result of the heart shaped chambers and minor head shave. Careful with flat pistons as the compression may get pretty high.....they used dished pistons as the motor was stroked by Honda to gain the extra displacement. The pistons nearly crown the block as it is.

    As for the heart shaped chamber I cannot speak specifically on it but the head was done by Bryan Maloof at Maloof Racing who is a very experienced engine builder and just happens to be into these early Honda's as a hobby. I figure he would not have went this route if it was not for a true purpose. Something about fuel atomization and better burn.

    One thing I can say is to go with side drafts. The addition of the dual carbs over Weber down draft produced for more of a performance increase then the engine work and cam grind.

  20. #20

    2ndGenGuy's Avatar
    Join Date
    Jan 2005
    Vehicle
    1981 Accord Hatchback, 1984 Accord Sedan
    Location
    Seattle, WA
    Posts
    9,697

    Re: EK Build Up and Engine Swap - '78 Civic

    Hey if you do that D-series swap, I'll take that EK off your hands.

  21. #21
    LX User 1GCustomAccord's Avatar
    Join Date
    Jun 2008
    Vehicle
    79´Accord,83´Lude,71´Nova coupe,83´Pontiac 6000,69 Mustang coupe,and many more rusted crap...
    Location
    PY
    Posts
    350

    Re: EK Build Up and Engine Swap - '78 Civic

    Cool! So the heart shape enhances mix and burn. I will use flat pistons because my motor is 1.6 litres, (for 1751 they used dished) so i think the chamber mod will increase comp way too much.
    About the sidedrafts, they (and the intake manifold) are very hard to find right?
    So many reasons why
    I won't be sending postcards
    From Paraguay

  22. #22
    LX User redr2's Avatar
    Join Date
    Oct 2007
    Vehicle
    '78 Honda Civic with Accod Motor
    Location
    Chilliwack, BC
    Posts
    106

    Re: EK Build Up and Engine Swap - '78 Civic

    Quote Originally Posted by 1GCustomAccord View Post
    Cool! So the heart shape enhances mix and burn. I will use flat pistons because my motor is 1.6 litres, (for 1751 they used dished) so i think the chamber mod will increase comp way too much.
    About the sidedrafts, they (and the intake manifold) are very hard to find right?
    Ahh, an EL.....ya they use flat ones. I had a 1600 in my car before blowing the head gasket and sourcing a 1751 motor. The 1600's have a shorter stroke than the EK so the flat pistons worked....I recall the compression ratios were about the same btw the EK and EL motos.

    The intake is tough to find. I have came across a few over the years for the 79-81 motors.... in dual and single side draft set ups. The only side draft ones for the 82-83 motors I have seen were custom. As for the carbs, those are pretty easy.

  23. #23

    Ichiban's Avatar
    Join Date
    Jan 2005
    Vehicle
    82 Honda Accord B20A, 76 Honda XL 175, 04 Honda Foreman ES, 83 Toyota shortbox 4x4
    Location
    North of You.
    Posts
    2,091

    Re: EK Build Up and Engine Swap - '78 Civic

    I've got an EL/5 speed sitting in my yard if anyone's interested. I've upgraded and won't be needing it
    ICHIBAN!
    "Now, even more better!"

  24. #24
    LX User redr2's Avatar
    Join Date
    Oct 2007
    Vehicle
    '78 Honda Civic with Accod Motor
    Location
    Chilliwack, BC
    Posts
    106

    Re: EK Build Up and Engine Swap - '78 Civic

    Quote Originally Posted by Ichiban View Post
    I've got an EL/5 speed sitting in my yard if anyone's interested. I've upgraded and won't be needing it
    Too bad your so far away. Always nice to have a spare

  25. #25
    LXi User SZfiftyfour's Avatar
    Join Date
    Jun 2006
    Vehicle
    '82 Accord DX Sdn
    Location
    Ocala, FL.
    Posts
    664

    Re: EK Build Up and Engine Swap - '78 Civic

    Quote Originally Posted by Ichiban View Post
    I've got an EL/5 speed sitting in my yard if anyone's interested. I've upgraded and won't be needing it
    I'm intrested. What year is it
    edit: n/m, out of your hatch duh, i'll pm you.
    Last edited by SZfiftyfour; 08-16-2010 at 07:58 PM.

Similar Threads

  1. B18B1 Build and Swap - Rendon LX-I
    By Rendon LX-i in forum General Engine Swaps
    Replies: 679
    Last Post: 07-27-2023, 04:21 PM
  2. AccordB20A's EG Civic Build
    By AccordB20A in forum Project Central
    Replies: 295
    Last Post: 06-05-2012, 12:54 AM
  3. My winter beater stereo build: '93 Civic EX sedan
    By Hash_man_Se_i in forum Interior & Exterior Care
    Replies: 3
    Last Post: 12-25-2009, 02:45 PM
  4. 88 accord engine re-build vs. swap
    By fish280 in forum General Engine Swaps
    Replies: 17
    Last Post: 10-09-2002, 12:26 PM
  5. B16A Build & Swap...
    By Honda-Roku in forum General Engine Swaps
    Replies: 6
    Last Post: 05-29-2002, 06:53 AM

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
This website uses cookies
We use cookies to store session information to facilitate remembering your login information, to allow you to save website preferences, to personalise content and ads, to provide social media features and to analyse our traffic. We also share information about your use of our site with our social media, advertising and analytics partners.
     
Links monetized by VigLink