I / We need the Digital heater control wiring diagram.

[carotman]

Well, in the Shop Manuals that were available on www.pauldesign.ru, the digital heater control wiring diagram is nowhere to be found.
I need this to complete my conversion. I could go guesswork but it would be so easier if I kney what to look for.
Anyone has access to those diagrams?
epic1400cs, maybe your mentor in Japan gould get these for us?

[w261w261]

Sorry for my ignorance here, but is the "digital" heater control a special unit?
I have an SE-i, is it that unit? If so, I have a Honda publication: "Accord Electrical Troubleshooting manual 1989" which has a 2 page spread on the circuit schematic for the heater controls. Is this what you are looking for? I could scan it if so.

Hal

[newaccorddriver]

If so, I have a Honda publication: "Accord Electrical Troubleshooting manual 1989" which has a 2 page spread on the circuit schematic for the heater controls. Is this what you are looking for? I could scan it if so.
Hal

that might be what hes looking for. but i wouldnt exactly trust those diagrams cause it was very misleading to me. what i thought was a simple harness was really actually the entire cars harness cause of the lack of wires the 88-87 had and the differences in 88-89 accords.(im talking about canadian spec accord though, american spec is different from what i usually see)

[carotman]

I need this for the JDM version....

I opened it and the PCB said this:
Connector 1:
VEN COL XXX FR MGC SM
DEF HOT FRS F/R REC NS

Connector 2
IG B+ BLW S5 XXX SG TR ST AP
ILL INSW INM MV GND TW TAM TE MP


Now, I need to get new buttons for the JDM controls, mine are a bit worn out

[A18A]

bump

[A18A]

bump

[kyaccord]

whats bump? im still wonderin what that means lol

[A18A]

BUMP

BUMP to bring up somebody's post typically by posting the word "bump" on a message board
Can also stand for
Bring
Up
My
Post
bump!

[kyaccord]

right on

[A18A]

indeed

[kyaccord]

hey were did you get the yellow headlights at?

[A18A]

I found them on a abandond accord on the side of the road

[kyaccord]

no way lol

[epic1400cs]

Well, in the Shop Manuals that were available on www.pauldesign.ru, the digital heater control wiring diagram is nowhere to be found.
I need this to complete my conversion. I could go guesswork but it would be so easier if I kney what to look for.
Anyone has access to those diagrams?
epic1400cs, maybe your mentor in Japan gould get these for us?

I didn't realize that you needed this till today, apologies.
I might be able to ask my fellow.
I am not sure you still need it but if so, let me know a bit more detail via PM.

[3gmodifier]

my digi controls are 100% complete and functional. i got it complete and un cut so beside a few de-pinnings to reverse some stuff it was basically plug and play. what exactly do u need?

[AccordB20A]

theres two types of climate control in the accord, the one i sent 3gmodifier, which is the easyest to install cause its mostly plug and play and the other 88-89 type which has grey controls. and aparently its wired into the accords loom to be a bitch. and yes matt you will have fun!!

never seen a wiring diagram but i do know where another standalone unit type climate control is i tried selling it earlier with no luck, now the buttons are gone

[2oodoor]

old thread, only JDM or EDM models have digi controls?
not meaning to hi jack but It would be awesome if somebody could link a JDM electrical schematic set.
I kinda need to check something too

[A18A]

its only the last of the 89s that got the grey climate controls i belive

[AccordB20A]

its only the last of the 89s that got the grey climate controls i belive

glad i have 1985 version. and why arent you on MSN mr a18a

[A18A]

i am on msn!

har

i just stripped apart my main loom to try figure this thing out

wish me luck!

[A18A]

i have just figured out where every wire from the climate control goes now to make it into a stand alone loom

[carotman]

Oh nice!

So you're going to help me wire mine?

I think I'm missing a few things tough. Got any parts in double or triple ?

My climate control box says 177200-0061 on the back

[A18A]

i actually do have some spare climate control parts since i ruined my last set i just have to find them. i'll test to make sure these work before doing a write up on how it all goes, i might have done something wrong and ruin another set :O (hope not)

my climate controls say SEO/89F 177200 - 0390 on the back, but the pinout is the same as the one you posted up there ^^. i think the difference is cause these ones are grey and yours are the black kind

[A18A]

help me help you ive sorted it all out but I have no idea how to do a write up

[carotman]

Well, just send me a PM with what you got, I'll be able to work something out