Here the dyno of my B20a Turbo
Click on screen to watch video
You Asked For It
Here the dyno of my B20a Turbo
Click on screen to watch video
Last edited by TWOLOUDNPROUD; 09-22-2008 at 05:22 PM.
LX-R coming soon Here's a hint. 89mm stroke/ 41.60cc head /ARP head & main stud's /SRP piston's 81.5mm 9:5:1/Crower Rod's & more to come
Thats great. Awesome to finally see a dyno of a setup like this. So you gained about 60hp with the turbo? About 230bhp would you guess? Not too shabby!!!
nice nice very nice and clean
we played with for a while and got 212hp but tha cams i am useing and just not doing the job. I had them made for my N/A b20a and web cam said they would work with the turbo but i should make more hp then that.so i am going to call colt cam and get me some tri flow cams.Originally Posted by 2ndGenGuy
Thats great. Awesome to finally see a dyno of a setup like this. So you gained about 60hp with the turbo? About 230bhp would you guess? Not too shabby!!!
LX-R coming soon Here's a hint. 89mm stroke/ 41.60cc head /ARP head & main stud's /SRP piston's 81.5mm 9:5:1/Crower Rod's & more to come
nice
3geez for life.
sweet, very inspiring indeed!
Thank You Guys
LX-R coming soon Here's a hint. 89mm stroke/ 41.60cc head /ARP head & main stud's /SRP piston's 81.5mm 9:5:1/Crower Rod's & more to come
Beautimus, hits 150 just right off the bat then pushes relentlessly till you cut it. Couldnt ask for any better than that other than the top number (which is still fine by me)
MY eyes bliniked for a second on that last run, I thought the motor jumped out lol
Last edited by 2oodoor; 09-22-2008 at 06:48 AM.
http://pages.videotron.com/omus
3geez member since July 12 2000
I need these parts!
https://www.3geez.com/forum/showthread.php?t=67742
Is this good or bad?
LX-R coming soon Here's a hint. 89mm stroke/ 41.60cc head /ARP head & main stud's /SRP piston's 81.5mm 9:5:1/Crower Rod's & more to come
you must have some nice mounts...mine engine rocked back and forth when i dynoed
1989 Honda Accord LX-i
B18c1 swap since 7/2011
175whp and 132tq
Redzone tuned
Pretty sure he's got a solid front mount... LOL!
It not solid i am using Leaf Spring bushing's for my front mount you can see then in this pic.
LX-R coming soon Here's a hint. 89mm stroke/ 41.60cc head /ARP head & main stud's /SRP piston's 81.5mm 9:5:1/Crower Rod's & more to come
Ooooh ok. You HAD a solid mount though, didn't you?
Yes i did and that what broke the front stock corssmenber so i made a new one as you see in the pic
Last edited by TWOLOUDNPROUD; 09-25-2008 at 01:46 PM.
LX-R coming soon Here's a hint. 89mm stroke/ 41.60cc head /ARP head & main stud's /SRP piston's 81.5mm 9:5:1/Crower Rod's & more to come
i thought you would have popped the gearbox before you fucked the Xmember and mount those three times you broke it haha
My mate blew his gearbox the other day. one less B20a 5 speed surviving
I know, when I read that I said "note to self, go back and read the thread" that is some serious snatchage
nice car man
Posting Permissions
Reply With Quote
Bookmarks