3gmodifier's shaved sedan for sale!!!

[3gmodifier]

didnt feel like meesing with the image shack option on the ad placing section.
hey guys i know there is a lot of older member who remember my shaved sedan. and if not check out the pics. any ways my 2 year project coupe is basically done and i really have no use for the sedan. i am not going to blow smoke and say its 100% perfect but it is not a bad car.

perfect for someone just starting out in the 3g scene.
i am asking $2,000.00
mods;
rear disc brake conversion
jdm corner lights
jdm map light
jdm cornering lights( might take those to sell seperate, not sure yet)
3rd gen prelude seats (front)
4th gen prelude seats (rear)
slightly cut stock springs
new axles
knock off strut bar with original dc mounts
brand new PPG windshield
fully shaved doors with remote door popper
killswitch and push button start
fully insulated trunk with fiberglass*
decklid i fully dynamatted and applied rubberized coating*
***perfectly setup for some serious soundage!!!
refurbished door panels charcaol grey
dark grey dash swap with a,b, and c pillar plastic done black
window visors
prelude steering wheel
auto meter cobalt series tach with shift light.
i also have a pacesetter header for it and an almost never used 2 3/4 inch stainless exhaust set up with a brand new cat.

there is a small crack on the down pipe to cat flange that needs to be welded up.

i also have one of the first production run carbon fiber hood. has a few small stress cracks, yellowing edges, and needs a clear coat

this would actually be a great car to continue with. maybe just a new set of bumpers and paint job would have this car ready again.

i am sure there is more but i just cant remember it. i will try to find some more pics.

P.S. the foglights and rims are on my coupe so disregaurd them from the pics.

thanks for looking

[jdmaccordnut]

For 2 grand it should have paint man.

[3gmodifier]

For 2 grand it should have paint man.

if you wanna say that, thats cool. i just figured that over the last 5 years that i have owned it and the time and money put into it( upgrades not to mention regular services and wear and tare upkeep) instead of spending a couple a grand just make it somewhat decent, just slap on a new paint job and the hard work is done for you. not to mention some parts that are hard to come by so to speak. and besides i am totally willing negotiate.

[A18A]

are those intersection lights oem standard for a 3g accord? ive never seen them before

[labeledsk8r]

^was going to ask about them aswell as there not on any american 3g the actully look ok on there.. normaly only on granny cars though lol... but 2 grand isnt "to" bad on a well upkeeped car and id consider it if i wasnt on the other side of the U.S. good luck

[3gmodifier]

^was going to ask about them aswell as there not on any american 3g the actully look ok on there.. normaly only on granny cars though lol... but 2 grand isnt "to" bad on a well upkeeped car and id consider it if i wasnt on the other side of the U.S. good luck

thanks for the props! no they weren't actually stock on the 3rd gen accords. the set i have came off a 4th gen but they fit, look,, and work nicely.

[MessyHonda]

not a bad price...what happen to the power folding mirrors?

[3gmodifier]

oh you remmebered those. nice! I put them on my coupe. just stockies on the sedan now.

[nswst8]

$2000 for a reliable car with mods is more than fair most of the works appears to have been done.

[Rendon LX-i]

man i would take it in a heart beat. but sucks with all the bills i have.

[ZackieDarko]

MOAR info/pix on the push button start

[snoopyloopy]

if you turn to the parting business, dibs on strut bar?

[3gmodifier]

MOAR info/pix on the push button start

basically, the alarm has remote start. about 2 years ago i was redoing the cabin wire harness and accidentally shorted the remote start wire wich intern screwed up the contacts in the actuall ignition switch. i was just going to get a new one but instead decided to re wire it to a switch. i used the the resume button on the steering wheel but there was too much current to make it reliable. so added a relay, still didnt work quite right. so my 3rd and final version ended up being the antena switch. its perfect because i shaved my antena so there was no need for the switch itself. so in all it looks completly stock without any additions like a new switch. i also removed the starter wire completly from the ignition switch itself. that along with the use of my hidden killswitch makes the car vertually impossible to steal with out the use of tow truck.

[3gmodifier]

if you turn to the parting business, dibs on strut bar?

i wasnt really thinkg of that especially because if i was to sell the doors to some one they would still have to shave the dogbone and fenders. it would just be easier to sell the whole thing so some one can continue. but if i do, i got covered!

[3gmodifier]

i almost forgot, my sedan has kyb gr-2's on it.

[cubert]

if this was on the right coast id be all over it...


good luck in selling it

[codyJDM]

Wanna trade steering wheels with a little cash your way? I have been looking for that one for a while.

[blazin3gen]

Wanna trade steering wheels with a little ceash your way? I have been looking for that one for a while.

ill check my picknpull if i find one ill let u know they usually have a shitload of em i bought 2 when i had my 3gee

[3gmodifier]

Wanna trade steering wheels with a little cash your way? I have been looking for that one for a while.

hey i have 4 of them, 2 of them, i have already modified to be a direct replacement. u still gotta modifiy the turn signal off trigger mechanizm but i can put some shit together to make it all swapable. gimme $20 and i will set u up with everything to make it work.

[codyJDM]

hey i have 4 of them, 2 of them, i have already modified to be a direct replacement. u still gotta modifiy the turn signal off trigger mechanizm but i can put some shit together to make it all swapable. gimme $20 and i will set u up with everything to make it work.

Sounds legit man, have one ready for me this weekend

[3gmodifier]

still up for sale guys. any one interested. i am willing to work out a decent deal with someone who will take care of it/ continue it.

[cubert]

damn man...someone needs to jump on this....


get it to the northeast and ill take it

[3gmodifier]

a lil' update. the sedan has not sold yet but i am kinda glad beacuse my fiance's 02' civic 2dr EX VTEC's tranny has a spun differential bearing, so at least i have a spare car for her. i am pulling the tranny tomorrow to replace EVERY bearing, clutch, and resuface the flywheel. i have to say that after not driving the sedan in almost a year, and thinking about all the shit and time i have put into it, i love that fucking car. it kinda makes me wanna just pay for the paint myself and let it live on. it is still for sale but i dont NEED to sell her. later!

[wprocomp]

how did you get the pwr folding mirrors to work on the coupe-the mirror bases are different

[AccordB20A]

you swap the basses over, everyone knows that