Results 1 to 6 of 6

Thread: diy multiple map sensor mod

  1. #1
    LX User 89sei89dx's Avatar
    Join Date
    Mar 2007
    Vehicle
    87 hatch lxi
    Location
    yakima wa
    Posts
    206

    diy multiple map sensor mod

    i was wondering if i do this mod . can i put a 91 integra map sensor on it. i have 1 and its 3 wires as ours are. but will this work like putting a a 4th or 5th gen accord map on it. will it be thhe same as what u are talkin bout . what do u guys think. and does anyone know what wires i would match to get it to work.also i have removed the black box and alot of the sensors in it and im gonna try to put some pics of that and details on how to do it on here. i have had no negative performance or mpg problems. all i have left now is the map. ignitin controll module and cvc ..constant vac controll. does any oneknow if i needto keep the cvc .ihaave 3 vac lines left comin off the passenger side. and im in the procees of tucking them out of thhe way and cleaning it all up and gettin the stock metal vac lines off the manifold.



  2. #2
    3Geez Veteran Pico's Avatar
    Join Date
    Dec 2005
    Vehicle
    88 LX-i Hatch (Sold),1989 LX-i Sedan (Sold), 88 LX-i Sedan (Sold), 89 LX-i Sedan (RIP)
    Location
    Vallejo, CA.
    Posts
    6,338

    Re: diy multiple map sensor mod

    It's been done with the 3g and 4g sensors, here's the link https://www.3geez.com/forum/showthread.php?t=61700

  3. #3
    3Geez Veteran Civic Accord Honda's Avatar
    Join Date
    Aug 2006
    Vehicle
    1995 Civic/ 1988 CRX
    Location
    Tehachapi Ca
    Posts
    13,103

    Re: diy multiple map sensor mod

    idk if a integra one would be a upgrade as its a 1.8 and our cars are 2.0

    1988 Honda Accord LX-i Coupe 123k miles.

  4. #4
    SEi User
    Join Date
    May 2002
    Vehicle
    87 hatch, stock sleeve b series gsr clone..
    Location
    south dakota
    Posts
    1,296

    Re: diy multiple map sensor mod

    If the voltage output vs press is the same, (probably is) you could even run a newer integra map sensor right on the throttle body with a b series manifold too. That would be nice and clean.

  5. #5
    LX User 89sei89dx's Avatar
    Join Date
    Mar 2007
    Vehicle
    87 hatch lxi
    Location
    yakima wa
    Posts
    206

    Re: diy multiple map sensor mod

    thanks for the input guys. im still wonderin. i got a 91 integra with the b18. for 150 bucks. it runs hella good when i can get it started. it has a problem starting . it will turnover and over but not start. just keep turnin over till the battery dies. ive tested thhe coil and ign controll module thatare in the dist. and they test the same as brand new ones at autozone test. so we ruled those out . and ive checked the timing spark and fuel. cant get it to start. but we. did get it started a couple of times drove it up the road and it ran awesome . but after i turned it off it has trouble starting again. so ive been fixin up my hatch and thinkin about switching the map and see if thhe integra map is any better than ours. im gonna try and let u all know how it works . i looked on internet last night and it said that the map for that year teg is also replacement for 91 to 93 legend.. 91to 96 nsx.. 92 to 93 civic.. 93 del sole and 92 to 93 prelude. so if thhat is any better info do uguys have any ideas whheather it will work or not.thanks alot .i really appreciate all the good info on hhere. this site is alot of hhhelp. ....but. its so hard to find info whheni search. ialways do that first becouse i try. ilooked for info on here for months for removing sensors and vac lines off the fi but it came up with so many other posts.that iwould end up lookin for hours most the time. i recently looked at preludde power for like ten minutes , in the 2nd gen section and found all ineeded. .i do love this site tho. thanks. also i got a broken keyboard sosorry for double letters and spelling n stuff

  6. #6
    LX User 89sei89dx's Avatar
    Join Date
    Mar 2007
    Vehicle
    87 hatch lxi
    Location
    yakima wa
    Posts
    206

    Re: diy multiple map sensor mod

    also i live in washington around yakima. and i got two coupes.and my hatch i drive now and a bunch of parts. i would trade parts or somthin if anyone has a headed and/or 272 cam. but i dont have money to gobuy those two parts yet. those are what i really want to put on it . ive done most everythhing i can with bolt ons and got all the parts to turbo the car accept a turbo manifold and injectors.. but for now i dontsee thhe turbo really gettin done very soon so im lookin for a header for now. plus i havent upgraded the pistons rods or block yet. or a valve job. so all thhats later.thanks for all ur info on here guys .also i really want to keepmy b18 formy hhatch later.

Similar Threads

  1. Multiple Problems...
    By gtoman in forum 3geez Accords
    Replies: 14
    Last Post: 08-15-2012, 03:39 PM
  2. [Electrical] Multiple Map Sensor Harness
    By mushroom_toy in forum How To
    Replies: 7
    Last Post: 08-22-2007, 12:41 PM
  3. Multiple leaks
    By BigBambooman in forum 3geez Accords
    Replies: 1
    Last Post: 10-06-2005, 05:41 PM

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
This website uses cookies
We use cookies to store session information to facilitate remembering your login information, to allow you to save website preferences, to personalise content and ads, to provide social media features and to analyse our traffic. We also share information about your use of our site with our social media, advertising and analytics partners.
     
Links monetized by VigLink