A20 integra (1st gen)

[evil88accordLX]

now that i have your attention, is an a-series a direct drop in for the 86-89 integras? i know, who would do such a thing? the reason i ask is because hasport now makes a b-series mount kit for the integra. the fronts of the 2 cars are virtually identical. and if the A will bolt into the integra, the new b-series mounts should work for the 3gee.

[cygnus x-1]

I highly doubt it. The 1g Integras had the D16A1 (USDM) which is very different from the A20. The chassis are similar but not the same.

C|

[AccordB20A]

indeed the 1g integra has the same mounts as the 1g CRX and 3g civic. nop front engine mount, no dog bone, Just a mount coming off the front of the gearbox, a rear mount and a side motor side mount from the front of the motor to the chassis where the accord has a front mount, rear mount, motor side mount and dog bone

[evil88accordLX]

so the chassis points where the engine "hangs" is different? thats what im concerned with. the part that is welded into the car, not the part that bolts to the engine.