ATTN: Custom gauges help!

[Paul Aerodeck86]

I need your help!
Who is have already uninstalled gauges?
I working on MPH speedometer and i need correct it to real.

Who can print this image and try to fit it to real speedometer?


And then told me, how i must correct it (rotate etc)

In finish i want to make something like this (but with main MPH and small KMH)



Thanks,
please reply me by mail or in this topic

[2Fast_Fiero]

I replied, I'll help you and I got your back man.

[2Fast_Fiero]

Allright, I printed your guage out at 10.003CM on Photoshop, here's what I See....
0mph is at 1-2mph, the 10mph is in the middle of the real 10 and 15mph, the 15mph is in the middle of the real 15 and 20mph line. the 20mph line is at the real 22mph. the 25mph line is at the real 27mph line, the 30mph line is at the real 32mph area, 35mph line is at the real 37mph area, Every other number is 1mph difference until you get to 80, 80mph is totaly even and then everything from there is 1mph lower then the real speed.

[Paul Aerodeck86]

Ok, thanks!
Today i try to correct it and post new version of picture.

[netfreak]

ME NEED CUSTOM GUAGES!!!

When can you start selling the guage kit?

[2Fast_Fiero]

Was that acurate enough Paul? If not just say so, I can find a way to stick the guage printout to the stock ones and scan them with light shinning through for you if you want...it will just take me some time to get the scanner. My brother has one so I could use his.

[Paul Aerodeck86]

MIA, if you have scans, what after print is absolutly correct on real gauges, please send me it (with odometer holes).

[2Fast_Fiero]

The guages I have been making are more exact then yours. not completely, but most of the dials actualy touch the right spots, if you want them, I'll send them to you, Unless you want me to get you a picture of what I'm talking about. I'm sure I can glue the paper to the guages and shine a light through them while scanning them to get the acuracy right. But when you printout my guages at 10cm, almost every dial is touching its real spot.