I've noticed almost every single 3rd gen has rotted rear fenders... whose found the best and easiest way to fix this... I have putty in there, but it looks real bad... (I didn't do the work, bought it that way)
I've noticed almost every single 3rd gen has rotted rear fenders... whose found the best and easiest way to fix this... I have putty in there, but it looks real bad... (I didn't do the work, bought it that way)
i dont have any![]()
mine has barely none to. But buy some rust converter, which will try and stop the production of more rust. Then sand the rust areas down and make sure you take off any paint that you can tell there is rust under ( bubling ) sand it, primer it, bondo it if you have any holes and paint. The key is to stop it before it gets out of hand. good luck
89 efi conversion
17" katana, lude arms, full 2" exhaust/hollowed cat, Ractive intake, centerforce dual friction, msd coil/wires
i just bought rear panels and i have to get them welded in. this is all part of my sweet car conversion!
Travis
www.cardomain.com/id/dxhatchback
I did the sameOriginally posted by DXHATCHBACK
i just bought rear panels and i have to get them welded in. this is all part of my sweet car conversion!
Travis
i tried to fix it last summer, but the rust is comming again. oh well i am just gonna have to fix it again and next summer and summer after that. untill i have no metal and i have my car made out of bondo.
Alex.
...come to Canada guys....EVERY SINGLE 3G ROTS IN THE SAME PLACES!!!!!!!!!
Originally posted by larnaton
I've noticed almost every single 3rd gen has rotted rear fenders... whose found the best and easiest way to fix this... I have putty in there, but it looks real bad... (I didn't do the work, bought it that way)
well my way to fix it is to live in a place theres no rain. sunny socal
my 4g did that same thing it was a pain in the ass. then i wrecked it so thats how i fixed that.
![]()
...ok, so where's the best place to get the replacement rear piece-panels
..i need to do the same for my hatch
-Mark D.
no kidding...the rear fenders are a bitch..i was sanding it today, my hands are sore. both sides are rusting, found some holes on one side already. the rest of the car is goood except for the rear fenders.
so whats the best way to fix or fill those holes without going broke??
i don't have any!! That sucks!! I want my fenders to have rott!
-=PROJECT-=-
NOTE: Project-R Swap parts provided by Racing Impulse. Swap was Performed by RacingImpulse & Next Wave Auto Performance.
B-Series Wants You
:lolOriginally posted by ‹^› ‹(•¿•)› ‹^›
i don't have any!! That sucks!! I want my fenders to have rott!
Mine doesnt have any rust at all:p
![]()
Performance Modz: Short Ram Air Intake, Custom Exhaust w/o Cat & Resonator, Cherry Bomb Turbo Muffler, Accel Coil, Removed AC
Other Modz: Clear Blinkers, Purple Calipers, Accord Emblem On Dash, Winking Headlights
so bondo the cheapest way to fix it?
Bookmarks