I would like to know who else has moved the cruise actuator? I'm going to have to move mine, because the new power steering resevoir takes up that part of the inner fender. There is plenty of room under the bumper corner, I don't have a washer tank there anymore, and i'm removing the useless AC system,so no receiver dryer. This is what I came up with as far as extending the cable, I used an aircraft cable with fixed ends, and a 1/4-28 thread on each end. with a mounting block,this bolts right up to the cruise unit, the other end,I used a piece that was going to be for my choke cable originally, it mounts the other end on a pivot,so the cable doesn't bind, it should be easy to fabricate a bracket to hold the original cable in place, and connect the two.
![]()
Bookmarks