HOPING SOMEONE CAN POST A COMPLETE INTERNAl PERFORMANCE LIST FROM OTHER CARS. TAT WILL FIT THE B20A INTERNALS .PLZ POST IM TRYING TO BUILD A PERFORMANCE B20A WITH 250HP NA . IV SEARCHED AND AL OF ITS DISORGANIZed .some people keep sayin naa that dont work so i need a for sure Answer what fits wat with some modification thnx guys.
rhd restoration 2nd gen prelude
First off, you want 250 HP N/A, i would hope you can try to search for yourself (and i know you said you had) and come up with your own answers. Do you own organization and search for your own answers. Squeezing out another 110 HP from an N/A motor is gonna be hard if you cant find your own facts.
Not trying to be a dick, but this is the second whiny pleading thread that you've made with little or no effort on your part. Not even gonna attack the grammar/CAP ISSUES (oops i may have anyway)
took me 30 seconds to find, literally. Lists pistons, rods, bearings, valves etc.
https://www.3geez.com/forum/showthread.php?t=29259
Originally Posted by carotman
*waits for rjudgey to chime in*
does it really matter what parts fit or not??? I mean, if you want 250 NA then most of the parts will most likely have to be custom made..
get some cams bro.
other members on here have:
B16A2 intake
B16A High compression pistons (mod wrist pin size to fit them) good for 11:1 compression ratio i think.
you can even use h23 rods in the motor so you can get aftermarket. (once again the wrist pin size differs)
modded h22 headers or b20a5 headers made to fit.
OBD1 swap
SOHC F22 adjustable cam gears X2
rjudgey style head work ftw
yeah i just listed what i want on my car, im half way there too, all i had to do was search long and hard :)
Last edited by AccordB20A; 12-11-2008 at 05:40 PM.
b16 pistons?? they fit the a20?? :dunno:
the a20 bore size is like 82.67mm the b16 is 85mm i believe.
88 DX hatch.
theyre talking about the b20
oh ok my bad. i was wondering why it said f22 adjustable cam gear X2. lol. Where do you get the b20 engine and tranny for our car?
88 DX hatch.
From JDM/EDM/CDM accords. Good luck finding one, they are pretty rare.
Cant you find them out of a [3rd? or 4th gen?] prelude? Not shure but someone told me this.
89 LX Coupe - 5 speed
itd be in a 3rd gen prelude? but the ones in the preludes are a b20a5. not a b20a1
no you cannot get them out of any preludes except for maybe the 2nd gen preludes, but b20a powered preludes are even more uncommon than accords.
If you try and get them out of the 3rd or 4th gen preludes they will not fit. Totally different mounts, and the engine tilts the other way under load.
what? so those lean back engines, when you gun it, they tilt foward? how's that?
crank shaft turns backwards in cars down under? toilets flush counter clockwise?
:rofl:
:rofl:
what is the bore of an b20?
1989 Honda Accord LX-i
B18c1 swap since 7/2011
175whp and 132tq
Redzone tuned
81mm
wait so the b16 stock pistons work or any aftermarket ones , and h23 rods ok got what rod and main bearings do i use if i do that, also
wat cams are out there fit our b20a or just colts
rhd restoration 2nd gen prelude
Yes Or No
rhd restoration 2nd gen prelude
Posting Permissions
Reply With Quote
Bookmarks