need more people to buy JDM parts, but this is the wrong time of year to sell with this recession and all. stock balancing will be all good, dont wanna rev it past seven. if i can assemble the bottom end myself i may be able to shout out for some flash rod/head studs
I'm tellin ya, you can do it. Just follow the FSM procedures to a T and you'll be good to go.
and pray like hell the clearances all work out otherwise im fucked, i aint going to pay out for more bearings cause the ones i got are too small or whatver.
you give me the advice john and ill consider building the bottom end
If your clearances are off, you will know when you Plastigauge the bearings. The book will give you a range of clearances. Then you take the Plastigauge and place it between the crank and bearings. You torque everything to spec, then take it apart and measure how much the Plastigauge squeezed out and that tells you the clearances.
To make you feel more comfortable, you can take the crank to a shop and they can also mic it out and make sure that the crank is within tolerance. Then bring it home and double-check it with the Plastigauge (you should double check their work whenever possible anyways).
what else do you have for sale? I may buy some other stuff from ya, pm me!Originally Posted by AccordB20A
agreed. what you got...i want maplight lol
200+ ALL MOTOR LS VTEC
I need two sets of jdm fogs!!! GOT ANY???need more people to buy JDM parts
3geez is F**kin Awesome!!!
not really that stocked up at the moment but i know what to look out for, i have lots of sets of power folding mirrors thou lol
and i just threw one out
a nice locked one not a plain plastic one
i have heaps of those maplights that bolt into the rood of the car but you need to cut the head lining and install a bracket in there to use it, its the smaller most common maplight for the non sunroof cars.
isnt this thread getting off track a bit?
from engine rebuild to map lights
and not to mension i have a 86-87 JDM front lip for sale too
very off topic indeed. i must member to take my pistons and rods to town tomorrow
will it fit my car or are the bumpers diff at the bottom
theyre different, but if you look in thegreatdanes aerodeck thread he made one fit a 88-89 bumper. lol off topic much
Yea the front fits but the sides r too long or too short. its a three piece lip
What's it look like? If getting the 88-89 bumper and fixed light bumper lights from you turns out too expensive or you can't find them, I could maybe buy the lip...
i have a feeling that shipping the bumpers going to cost over 500euro, talked to my mate alex yesterday hes switched on with the shipping prices, sop unless you turn into a millionaire/get one from the USA i dont think i can ship you a bumper.
As for the lip ill PM you a pic of it.
well i put my pistons and rods into the shop today finally, they reckon $300NZD to bore out wrist pins and install the b16 pistons on my b20a roads, WIN
now i need people to purchase my JDM parts
thats not toooo bad, could be worse i spose
i got quoted 200 to make rb20 nissan rods fit a12 datsun crank
so maybe 300 is a bit much, but thats the ni for u
haha as long as its done good and will exept what i give it!
hey man do u think u can get me a new head gasket set i need one badly help me fund ur build ill do that if u can get that same one dnt need a headgasket
rhd restoration 2nd gen prelude
i dont know lol head sets come complete with the head gasket, i can get aftermarket head sets and thats it, they are like $300 nz tops
WOW NOOOOOOOOOOOO.... lol i really want to get one. I have no light i have flip down an it has led lights for the back but for the front i dont got lights. If anyone has a maplight for sell. Pm me if you can. SOrry for thread jacking lol
200+ ALL MOTOR LS VTEC
yea i said i need a head gasket set i dont mind the head gasket it self i just need the rebuild kit like valve cover gasket cam seals rear amin seal .and every seal on jsut the motor
rhd restoration 2nd gen prelude
Honda B18A, B20A DOHC 16 valve inj. 1985-88Head Set DP740
$200
Posting Permissions
Reply With Quote
Bookmarks