installing cold air intake?

[ghettogeddy]

the guy from autozone let me borrow a tool to cut the pipe, and the breather will fit if I push it hard enough and use lube haha, but there isnt room cuz it hits wires and a bar.

pics asap

[jamesh23]

pics asap

ill try, no digital camera though.

[jamesh23]

I got the sri on, it fits good, but the mini breather wont go on, do I need it? can i put something else there instead? OR JUST put the normal hoses again?

[ghettogeddy]

I got the sri on, it fits good, but the mini breather wont go on, do I need it? can i put something else there instead? OR JUST put the normal hoses again?

you might have gotin one thats to big i did not have to do a thing to mine to make it fit


can you find a like or give me a brand modle number so i can see what kind it is

[jamesh23]

you might have gotin one thats to big i did not have to do a thing to mine to make it fit


can you find a like or give me a brand modle number so i can see what kind it is

let me find it real fast

EDIT: here it is http://www.sfxperformance.com/parts/SPT3992.htm

same exact one.

[ghettogeddy]

looks like the same one i dont see why it wont fit

[jamesh23]

it just will not go on, idk why.

[ghettogeddy]

will ti not go in the pipe if so take the ring off and lube the pipe up it will go lol

[codyJDM]

Just stick a steak knife in the end of the breather and spin it around til it gets bigger and fits. Thats what I did.

[jamesh23]

Just stick a steak knife in the end of the breather and spin it around til it gets bigger and fits. Thats what I did.

I did that but it still only gets about half way down the pipe, so I stuck it halfway down and clamped it real tight

will ti not go in the pipe if so take the ring off and lube the pipe up it will go lol

what should I use as lube?

[ghettogeddy]

I did that but it still only gets about half way down the pipe, so I stuck it halfway down and clamped it real tight





what should I use as lube?

anything really some motor oil just a lil bit soap and water
if you have some pb blaster that will work as well

[jamesh23]

took it for a drive, sounds real nice i love it, everything felt fine, I felt a little bit more power and better acceleration, no check engine light, I love it, overall thanks to you guys, it took me two days but thats just cuz im dumb lol.

[codyJDM]

took it for a drive, sounds real nice i love it, everything felt fine, I felt a little bit more power and better acceleration, no check engine light, I love it, overall thanks to you guys, it took me two days but thats just cuz im dumb lol.

The sound our motors make with any intake is sick, super loud and aggressive. Glad you got it done. Pics!!!

[2ndGenGuy]

Nice work man. You're not dumb, it's just a learning experience. You'll start picking things up quicker as you learn more.

[jamesh23]

The sound our motors make with any intake is sick, super loud and aggressive. Glad you got it done. Pics!!!

ya I can only notice it when I step on the gas kinda hard, lol not floored but not when you accelerate slowly either. and Ill try, tonight we all have a beer in celebration lol jk, I just wanted to put that face, but thanks a lot guys seriously.

[OldSkoolA20accord]

well you ahve to find a wizered in the land of oz then he will wave his magic wand and give you the power of sight and then you will clearly see the 2 10mm bolts that hold the filter to the intake mani then a screw driver will fall out of you poop hole and you will see that on the intake opening you ahve to remove a clamp then just ripe everythign out lol its not roclet science also i suggest you buy a haynes manual or dl the shop mani

hahahaha. funny shit.

Is that your car ghetto? The big ass picture of the engine bay.

[ghettogeddy]

hahahaha. funny shit.

Is that your car ghetto? The big ass picture of the engine bay.

both if them actually lol

the first is from my 88lx
2nd form mt 87 hatch