hey, news! thanks for the update.
I was just looking around at some B18 gsr jdm powerplants last nite, j hot here has three plus a b16 lsd but it was automatic.
Im keeping my eye out for a coupe
hey, news! thanks for the update.
I was just looking around at some B18 gsr jdm powerplants last nite, j hot here has three plus a b16 lsd but it was automatic.
Im keeping my eye out for a coupe
Last edited by 2oodoor; 01-25-2009 at 01:20 PM.
Bump
LX-R coming soon Here's a hint. 89mm stroke/ 41.60cc head /ARP head & main stud's /SRP piston's 81.5mm 9:5:1/Crower Rod's & more to come
yo yo yo!!! on the real order me a set. i got the money i just dont wanna pay until u got em ya digg.. pm me when u get em cus im seriously down to throw another hundred when u get these in. peace easy
1989 Honda Accord Coupe
Stock Everything!
he most likely will not be ordering extras lolOriginally Posted by ROniel
I don't believe you all understand how this works.
Unless Tommy has the money up front the mounts won't be made. I not sure how many production runs are planned. But unless Tommy forks out the costs from his own bank roll and then allows you all to pay up when they are ready.
Tommy chim in, if I'm misinformed.
Tommy will need full payment before he is able to get the production run rolling.
Phil
awesome work tommy. based on the black/red mount you pictured on the first post, the only improvement to that specific mount I would request is to have a gusset welded to each side of the bushing and to the outer edges of the bolt holes (allowing enough room for a socket/bolt) but providing a ton more rigidity to the mount. I could just be overly anal about that strength though so I dunno.
Last edited by markmdz89hatch; 01-27-2009 at 06:55 AM.
-Mark D.
Mark I dont think so, did you see TWOLOUD's front mount retainer a few months ago?
ripped to shreads, the photo link seems to be not working BTW TWOLOUD.
Anyway I am sure he is on it like white on
little jokey joke jokey.. you like? lol
i prefer " like stink on poop " ....but yeah, as for mounts go, if they're welded, and not machined, the more gussets, supports, beefier-than-needed material, the better. Broken mounts suck shit through a tube.
-Mark D.
Well TWOLOUD Knows what he is gettting into.. so..
yes even though I dont have a car or engine yet to do this swap, I am excited about the avenues it opens up for these bodies. Im not gonna say I may come up with a pro stock B18 NA carbed powerplant and piss off the tuner guys because I want to make sure I get some mounts first.. oops
Pull me off, like I said, I just wanted to be in so I had the option to buy. I've been having issues with the Camaro, so any extra expenses are off the table for now.
I want to let you guys know Innovative told me last week they wanted payment in full before they start production. I understand where they are coming from business is slow money is tight and they don't want to be burned. Our Accords are not as popular as we would like them to be if they were civic mounts i think it would be a different story but they are not.It is getting harder to get good performance parts for our Accord's and we should Thank God that Innovative decided to do this for us and give us a life time warranty on the mounts you can not beat that for the price.Guys if i had the money i would put it up but i don't i am like most of you just getting by paying my bills and feeding my family. I have all ready paid for one set for i can post pic's of them to show you guys what they look like before you put your money in to them that the fair thing to do then to take your money and give you something you don't want.So if you guys have any Questions feel free to ask.
Done
If you want a set you will have to pay up like the rest of us.
Last edited by TWOLOUDNPROUD; 01-27-2009 at 01:18 PM.
LX-R coming soon Here's a hint. 89mm stroke/ 41.60cc head /ARP head & main stud's /SRP piston's 81.5mm 9:5:1/Crower Rod's & more to come
Yeah, I'm wanting a set, but I'm not in a position to buy. I'd love it if they'd keep them in their catalog so that I could order a single set in the future.
other than of the protective ring(dirt, dust, w/e) on inside of the 3g hubs, could i use b18 axles with these mounts?
i know they will work cuz i used those axles in my first b18 swap. i just dont know if i want to make mounts again for my se-i.
Bump
LX-R coming soon Here's a hint. 89mm stroke/ 41.60cc head /ARP head & main stud's /SRP piston's 81.5mm 9:5:1/Crower Rod's & more to come
other than the cool tax exempt title I would like to see this thread put up on it's own tab so that it appears as "important" such as director's memos...not my thread so I can't request that... oh hell title too then...
Tell me about it i guess this thread is not that important to the mod'sother than the cool tax exempt title I would like to see this thread put up on it's own tab so that it appears as "important" such as director's memos...not my thread so I can't request that... oh hell title too then...
LX-R coming soon Here's a hint. 89mm stroke/ 41.60cc head /ARP head & main stud's /SRP piston's 81.5mm 9:5:1/Crower Rod's & more to come
hey hey... ...so you're saying you want it sticky'd? ...don't hate, just ask.
-Mark D.
i can throw down on that, price isent too bad. will they have any name branded on them. and this includes all 3 mounts and the passenger side bracket? i am def in, just gotta wait til i get paid to send my full payment. do we def need 50 people or just the people who pay will get mounts.
ps is there any markup on these? its cool if there is, that business, i was just wondring if its something that may be able to be had from innovative later
Style Quality Uniqueness And Design
S.Q.U.A.D. Engineering
www.squadengineering.com
http://www.facebook.com/squadengineering
Whats the word?
Phil
still waiting for them to send the mounts to me.
LX-R coming soon Here's a hint. 89mm stroke/ 41.60cc head /ARP head & main stud's /SRP piston's 81.5mm 9:5:1/Crower Rod's & more to come
Bump
LX-R coming soon Here's a hint. 89mm stroke/ 41.60cc head /ARP head & main stud's /SRP piston's 81.5mm 9:5:1/Crower Rod's & more to come
i thought the cutoff was jan 31st?
Tell me about it i guess this thread is not that important to the mod'sSo just ask him already TWOLOUDNPROUD lol.
Will these be available from Innovative afterwards or will this be a one-off run?
If it's a one-off run that might make it more attractive for some people to get hold of a set.
However if they will be selling these afterwards as well it would be good for the 3rd gen popularity.
The list is still open until i get the first set of mounts from Innovative.
It's going to be a one-off run do to the poor turn out of this group buyso there will be no more mounts after this.
LX-R coming soon Here's a hint. 89mm stroke/ 41.60cc head /ARP head & main stud's /SRP piston's 81.5mm 9:5:1/Crower Rod's & more to come
Bump
LX-R coming soon Here's a hint. 89mm stroke/ 41.60cc head /ARP head & main stud's /SRP piston's 81.5mm 9:5:1/Crower Rod's & more to come
Posting Permissions
Bookmarks