Results 1 to 14 of 14

Thread: From Australia, 1988 accord A20a4

  1. #1
    DX User Munki's Avatar
    Join Date
    Jan 2009
    Vehicle
    1988 Accord EX (A20a4)
    Location
    Australia
    Posts
    33

    Thumbs up From Australia, 1988 accord A20a4

    South east Queensland, Gold coast. i got my 1988 A20a4/automatic Honda Accord 9 years ago it was my first car, don't think i'll ever get rid of it, i love it too much, 235,000km of the clock, got it for $3000aus the guy wanted $4000aus, i drive it gently 99% of the time it's full serviced once a year and i change oil myself twice a year. i've had it up to 165kmh no problems at all stability wise, maybe 5kmh more but i love this car, i didn't want to hurt it.

    Everything still works on it 'cept cruise control, clean inside too no cracks or missing parts, on the outside, a thin but deep scratch on the boot facing back, missing a black plastic piece just above the rear left wheel well, a 15cm by 10cm dent not very deep under the black plastic near back right rear wheel well and 1 or 2 very small ones, the front lip is the worst 20% paint chipped and 1cm wide gash on the bottom middle of lip, and the tint was bubbling so its been all removed 'cept the back window (cause the guy was scared he would wreck the defogger lines), i can see out of it though, haven't been done for it yet.

    Oh and if its been raining heavy.. the elec-sunroof dumps lots water on me when on hills , and the antenna doesn't move just go's click click click, and the bonnet is 5mm to high above the right flip light, not sure if its the bonnet or the light may have dropped... i think the light ???? (some idiot sat on the it i bet...)

    So its all standard ('cept 15" mags of coarse).

    There is some awesome 88's here, i like how ppl use the integra lip, if was to do anything special maybe that, i don't know much about fixing up cars though but was thinking new suspension and maybe air intake like short ram or CAI (is that right?, i got no idea) but only if it easy and inexpensive over comfit, performance and being worth it, as i would take it somewhere to be installed.

    Don't worry 3gee lovers i'll fix those minor exterior problems.

    I just walked out and took the pic, i'll take some nice ones somewhere cool once i wash and wax.
    Last edited by Munki; 01-20-2009 at 08:36 PM.



  2. #2
    3Geez Veteran A18A's Avatar
    Join Date
    Sep 2005
    Vehicle
    1988 Honda Vigor
    Location
    New Zealand
    Posts
    8,081

    Re: From Australia, 1988 accord A20a4

    cool stuf!!

  3. #3
    SEi User Hauntd ca3's Avatar
    Join Date
    Sep 2007
    Vehicle
    1988 ca3 si exclusive
    Location
    new zealand
    Posts
    1,878

    Re: From Australia, 1988 accord A20a4

    welcome aboard
    nice 3g
    yoou'll find all you need to know and a bit more here
    we're all 3g nuters,some more than others
    cai is prob better in the banana state tan a short ram
    want to keep all the heat you can outta the intake air, so teh further from the motor the better.
    the air cleaner behind the headlight or even better behind the bumper is prob the best bet.
    as for the sunroof leak
    check to see if the drains are clear .
    just open the sunroof and pour some water round the rain channels under the sunroof and look for it coming out under the car
    cant remember if there are three or four drains but they are there.
    the coast is a cool place
    have family in surfers and brisbane
    enjoy yourself here
    i have

  4. #4
    DX User Munki's Avatar
    Join Date
    Jan 2009
    Vehicle
    1988 Accord EX (A20a4)
    Location
    Australia
    Posts
    33

    Re: From Australia, 1988 accord A20a4

    Thx guys!

  5. #5
    3Geez Veteran MessyHonda's Avatar
    Join Date
    Feb 2006
    Vehicle
    89 LX-i(5speed)
    Location
    Bay Area
    Posts
    22,201

    Re: From Australia, 1988 accord A20a4

    looks good

    1989 Honda Accord LX-i
    B18c1 swap since 7/2011
    175whp and 132tq
    Redzone tuned

  6. #6
    DX User Munki's Avatar
    Join Date
    Jan 2009
    Vehicle
    1988 Accord EX (A20a4)
    Location
    Australia
    Posts
    33

    Re: From Australia, 1988 accord A20a4

    More pic's very soon inside and out, by the weekend at least. i'm kind of new to internet communities, more free time as i get older i guess, you guys don't know how much i love this car ...

    ok maybe scratch that now i've had a good look around.

    i don't know much about fixing up cars myself, i would end up shopping around town for quotes, i'd like to lower it abit, use new suspension, new brakes, help her breath, re-colour the valve cover as the black stuff is chipping away (how i found this site, searching on how i could do that) and new tint, i understand it's a older car, so i would be looking for the cheapest new parts.

    Will i be laughed at for bringing in a 20 year old car into a suspension specialist asking for a new setup?

  7. #7
    DX User Munki's Avatar
    Join Date
    Jan 2009
    Vehicle
    1988 Accord EX (A20a4)
    Location
    Australia
    Posts
    33

    Re: From Australia, 1988 accord A20a4

    Ok i've posted my pic's in the Interior/Exterior Accord Pics & Videos, here is a link

    https://www.3geez.com/forum/showthread.php?t=67468

    video to come

    one more pic ...
    Last edited by Munki; 01-20-2009 at 07:19 PM.

  8. #8
    DX User Munki's Avatar
    Join Date
    Jan 2009
    Vehicle
    1988 Accord EX (A20a4)
    Location
    Australia
    Posts
    33

    Re: From Australia, 1988 accord A20a4

    bah i think i'll post it now, youtube link.

    http://au.youtube.com/watch?v=TeqikOuqJXI

  9. #9
    DX User Munki's Avatar
    Join Date
    Jan 2009
    Vehicle
    1988 Accord EX (A20a4)
    Location
    Australia
    Posts
    33

    Re: From Australia, 1988 accord A20a4

    after taking pic's and vid i had a good look, i'm missing driving side door light too, Hondarec here i come. i have found lots good info and the search thingy helped, but i do have some questions, great site i'll be lurking around for some time to come. hope ppl enjoy pics and vid, for now till i do something major, bye guys.

    1. paint type for valve cover and back window trimmings

    2. i've never taken a valve cover off before, a explanation from un-bolting to resealing with new gasket, will i stuff it up?

    3. can i just bolt on a CAI to my "stock" A20a4? no other changes to say the fuel management system and/or the block itself?

    4. the rust ... i should sand it down asap? i'm not going to have money to respray the whole car for a long while, if so what could i use to protect the area after sanding away the rust?
    Last edited by Munki; 01-21-2009 at 12:52 AM.

  10. #10
    DX User Munki's Avatar
    Join Date
    Jan 2009
    Vehicle
    1988 Accord EX (A20a4)
    Location
    Australia
    Posts
    33

    Re: From Australia, 1988 accord A20a4

    after some heavy research, i'm got the rust, valve cover and paint sorted.

    But the intake still scares me abit. i don't think i should do the intake myself ...

    i've got 2 ends at the front of the intake one goes down into the wheel well and another that splits off near the battery and ends next to the radiator fan (just a open pipe), i can't see the "wheel well" one as its closed off by body work (must end right behind the left indicator), from there it goes to a box attached to the PGM-FI (filter i think) then another pipe under that on the plastic box does a U-turn into the Throttle body, the top part of U-turn piping on the throttle body has the valve cover hose. plus i think there is 1 or 2 other hose's attached to the plastic box(filter i think) on the PGM-FI.

    compared to a CAI or ram i see on some pics here, which from what i can see just go TB---piping---valve cover hose(coming off piping)---more piping----filter

    in my head i thought, pull front bumper off,

    remove :- intake piping -filter(box on the PGM-FI) -U'turn pipe on throttle body and maybe the original looking metal valve hose.

    to add new piping straight from throttle body to new air filter (into the wheel well where the original pipe ended, behind the left indicator) with new valve hose about midway(closer to the TB).

    but it couldn't be that easy could it?...

  11. #11
    LX User Tommy AC89 Thailand's Avatar
    Join Date
    Dec 2008
    Vehicle
    Honda Accord 1989
    Location
    Nakhonrachasima Thailand. Do you know where is it?
    Posts
    475

    Talking Re: From Australia, 1988 accord A20a4

    Nice to know you guy.
    My name is Tommy from Nakhonratchasima province Thailand.
    I had Accord 1989 swap H22A engine.
    I lived in Melbounre Victoria Australia for 2 years 1999-2000. (9 years ago)
    I never go to Queenland before.
    I didn't see Accord 88-89 when I lived in Melbourne.
    I studied in English language and Automotive at Chisholm Institute. (TAFE)
    I love Melbourne but, I don't like the weather....Freezing & Hot like hell...!
    How about Queenland can you tell me something about its?

  12. #12
    DX User Munki's Avatar
    Join Date
    Jan 2009
    Vehicle
    1988 Accord EX (A20a4)
    Location
    Australia
    Posts
    33

    Re: From Australia, 1988 accord A20a4

    hey tommy, i've seen your posts, you wanna know about Queensland? well i've never been to Melbourne, i hear it's a nice city though, the night life is pretty cool there i think, you should have tried making your way up too the gold coast, it's a bit more "tropical" up here, you may have heard the slogan "beautiful one day, perfect the next".

    i think there is a larger Thai community in Mellbourne maybe, not so much Gold Coast but Brisbane i know has a large if not Thai but Asian community that's pretty nice, Brisbane's china town is beautiful.

    you want help with your Signature i've read? you want a picture in there?

    1. upload the picture you want on a file storage site (i use Fileden, or try Photobucket)

    2. now your picture is uploaded to a website, now these sites will give a code and address too link too you picture, you need the one that is like: <IMG>

    3. cut/paste your uploaded pictures <IMG> code, into your signature.

    4. save and done.

    i'll post in your newbie intro and comment on your car, it's pretty cool, i love the engine swap but i agree with most people here.... you need to remove that body kit the orange car you posted looks like it just has a small front lip, like from a integra, like want most guys here do. like what i want.

  13. #13
    3Geez Veteran Pico's Avatar
    Join Date
    Dec 2005
    Vehicle
    88 LX-i Hatch (Sold),1989 LX-i Sedan (Sold), 88 LX-i Sedan (Sold), 89 LX-i Sedan (RIP)
    Location
    Vallejo, CA.
    Posts
    6,338

    Re: From Australia, 1988 accord A20a4

    very nice looking sedan

  14. #14
    LX User Tommy AC89 Thailand's Avatar
    Join Date
    Dec 2008
    Vehicle
    Honda Accord 1989
    Location
    Nakhonrachasima Thailand. Do you know where is it?
    Posts
    475

    Talking Re: From Australia, 1988 accord A20a4

    Quote Originally Posted by Munki View Post
    hey tommy, i've seen your posts, you wanna know about Queensland? well i've never been to Melbourne, i hear it's a nice city though, the night life is pretty cool there i think, you should have tried making your way up too the gold coast, it's a bit more "tropical" up here, you may have heard the slogan "beautiful one day, perfect the next".

    i think there is a larger Thai community in Mellbourne maybe, not so much Gold Coast but Brisbane i know has a large if not Thai but Asian community that's pretty nice, Brisbane's china town is beautiful.

    you want help with your Signature i've read? you want a picture in there?

    1. upload the picture you want on a file storage site (i use Fileden, or try Photobucket)

    2. now your picture is uploaded to a website, now these sites will give a code and address too link too you picture, you need the one that is like: <IMG>

    3. cut/paste your uploaded pictures <IMG> code, into your signature.

    4. save and done.

    i'll post in your newbie intro and comment on your car, it's pretty cool, i love the engine swap but i agree with most people here.... you need to remove that body kit the orange car you posted looks like it just has a small front lip, like from a integra, like want most guys here do. like what i want.
    Well.
    Thank for your reply.
    Tomorow my sister will go to study at Brisbane.
    She will continue to study in master degree at University of Queensland.
    Do you live at Brisbane as well?
    I had been to delay airplane at Brisbane airport 1 time that is beautiful city.
    This is my sister hi5 follow from this link
    http://www.hi5.com/friend/p42373214-...le%20One--html
    OK! Talk with you later
    see you then.
    Bye.

Similar Threads

  1. FS:Haynes Manual 84-89 Accord Melb,Australia
    By Sean619 in forum For Sale
    Replies: 0
    Last Post: 08-27-2011, 05:16 AM
  2. New from Australia.
    By OzAccord81 in forum Newbie Introductions
    Replies: 8
    Last Post: 02-10-2010, 09:38 AM
  3. My Accord - In Australia
    By [THNKB4] in forum Classic Honda Pics & Videos
    Replies: 10
    Last Post: 09-25-2007, 08:17 PM
  4. FOR SALE !!! Auto A20A4 Accord (australia)
    By Shifty in forum Trading Post
    Replies: 3
    Last Post: 02-08-2004, 01:37 PM

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
This website uses cookies
We use cookies to store session information to facilitate remembering your login information, to allow you to save website preferences, to personalise content and ads, to provide social media features and to analyse our traffic. We also share information about your use of our site with our social media, advertising and analytics partners.
     
Links monetized by VigLink