hey guys
i'm rebuilding my rear calipers right.
now the manual shows that the handbrake cam that actuates the handbrake just lifts out.
but mine wont
i mean its nice and free now after much shagging around but wont lift out.
i want to put all new seals in it and grease it all up so its good for ages.
anyone else done one of these before?
i didnt bother rebuilding.....legend master has a good writeup on how to upgrade to 1st gen legend rear calipers....piston is bigger for a better contact area
1989 Honda Accord LX-i
B18c1 swap since 7/2011
175whp and 132tq
Redzone tuned
You need to remove the rod the cam actuates (#10) to get the cam out. Unfortunately everything else needs to come out as well...
There is a thread on here somewhere that goes over everything.
Last edited by LX-incredible; 01-22-2009 at 10:26 AM.
88 LX-i coupe auto (241K DD), 88 LX-i coupe 5-speed, 89 SE-i coupe auto.
CARDONE SUCKS.Originally Posted by stat1K
Posting Permissions
Reply With Quote
Bookmarks