Ok it's mocked up, my air cleaners won't fit, they hit the dammed heater core hose on one side,and the brake booster on the other ,so back to the drawing board on the air cleaners,lots of work in those too. pisses me off. the manifold supports won't fit down in the engine,those were a guess anyway so no big deal to change. few hoses will have to be moved around. the main issue i'm having is the drivers side fuel bowl is too close to the master cyl. i'm trying to figure out if the piece of metal on the side of the mc is just extra casting. going to look at some more tomorrow to see if there is a different casting available. if someone has a junk one,with the same casting, can you please send it to me? i really need to cut it in half to see if i can just grind that off. still a long way to go,i have to figure out where to put the fuel pressure regulator, and lots of hoses to hook up. i need a shield over the alternator,i really don't like having a bottom drain fuel bowl over the alternator, so going to make some sort of shield or catch for the fuel bowl.
Bookmarks