1/4 mile

[Tommy AC89 Thailand]

Best record for 1/4 mile my car ran in 15.31 Sec. at Bangkok Drag Avenue Thailand with H22A engine in CA5 last year.

[86AccordLxi]

Not too bad...

Do you have the lsd tranny or is that open diff?

[SILENT]

Nice... Awesome looking car... Mad Props...!!! how good are the R racing shocks??? hook us up!!!

[Tommy AC89 Thailand]

Nice... Awesome looking car... Mad Props...!!! how good are the R racing shocks??? hook us up!!!

R-racing is Hard...and...Jump...! But, I like its.

[SILENT]

would you be able to send some to the US and if so how much for the set???

[Tommy AC89 Thailand]

Not too bad...

Do you have the lsd tranny or is that open diff?

No! I don't have LSD.

[Tommy AC89 Thailand]

would you be able to send some to the US and if so how much for the set???

It's difficult to find shock absorber like this inThailand.
Last time I use KONI Orange colour not good it's soft.
I couldn't drive my car is verylow just, 1 cm. from the ground...!
when I swap H22A in to my car.

[SILENT]

ok... well thank you for the info... again awesome looking 3gee... The H22 is simply amazing!!!

[88LXi68]

Good improvement over stock, but seems kind of slow to me. Is it tuned? Is the track above sea level? do you know how much it weighs?

[-$MOKIN-]

yeah sorta slow soundin to me too. looks like your got a gauge for everything in it. Wow. . .you need to loose all that weight you got in it.. And boy i wouldnt drive that at the track around here only runnin high 15's with the bright green paint i probably would get jumped at the track.. lol maybe take the body kit off primer it black then get rid of all the stickers on it take out all the interior even the door panels everything but the dash and the drivers seat. take the old gas tank out and put in a allluminum one in the trunk then drop it a inch in the rear and a 1 and a qyurter in the front. and run 15 inch rims with tires on it with low tire pressure. looks fun thought but just wouldnt run that car here in america. You might get shot in detriot if ya did.. lol
There has to be something wrong with a h22 in a 3gee to only run a 15. Thats sorta depressing to see that.I was thinkin the h22 to at least run a 13 in a 3rd gen. Even with slight mods to it .

[AccordB20A]

you should weight reduct your car and try again

[3rd Party]

There has to be something wrong with a h22 in a 3gee to only run a 15. Thats sorta depressing to see that.I was thinkin the h22 to at least run a 13 in a 3rd gen. Even with slight mods to it .

well duder, a Turbo II RX-7 making around 180-190 whp only runs low 15's, high 14's stock. so for an H22 to be running mid/low 15's isn't all that bad, considering our cars with the A20 probably run like 18's in the quarter, HAHA

[2ndGenGuy]

Stock Preludes with H22As in them seem to be running low 14's. I doubt there's a weight problem here. Seriously think that a few gauges is going to take a full second off the 1/4 mile time?

[-$MOKIN-]

Yea actually it could when you have a gauge for every sensor on your car .That can weight you down including having a extra 100 to 150 lbs for your interrior in it. It does effect your time. And running low profile tires is not good when your tryin to take off at high rpm's .If your goin to tac out your dash with ten tacs on it then you would think you would be set up to run 13 or 14's but to me running a 15 with a h22 in a quarter mile is not that good in my book. I think there was a 3gen a20 that ran low 16's on here awhile back he had a video. it was hilliarious to watch.

[thegreatdane]

Stock EDM BB6 H22A preludes run low-high 15's so doesnt look that bad to me.

[-$MOKIN-]

Wow .. I just thought they would run so much faster.

[86AccordLxi]

Gauges don't weigh 100-150lbs...

[AccordB20A]

still 15.3 will still shit on a lot of cars including mine

[Tommy AC89 Thailand]

Good improvement over stock, but seems kind of slow to me. Is it tuned? Is the track above sea level? do you know how much it weighs?

I don't tuned up with my engine yet.
Just standard ECU.
And standrd in side H22A
I don't know how many kilo of my car too.

[cubert]

yeah sorta slow soundin to me too. looks like your got a gauge for everything in it. Wow. . .you need to loose all that weight you got in it.. And boy i wouldnt drive that at the track around here only runnin high 15's with the bright green paint i probably would get jumped at the track.. lol maybe take the body kit off primer it black then get rid of all the stickers on it take out all the interior even the door panels everything but the dash and the drivers seat. take the old gas tank out and put in a allluminum one in the trunk then drop it a inch in the rear and a 1 and a qyurter in the front. and run 15 inch rims with tires on it with low tire pressure. looks fun thought but just wouldnt run that car here in america. You might get shot in detriot if ya did.. lol
There has to be something wrong with a h22 in a 3gee to only run a 15. Thats sorta depressing to see that.I was thinkin the h22 to at least run a 13 in a 3rd gen. Even with slight mods to it .

And after all that you have a car thats useless for anything but racing....unless youre into driving a tin can on a daily basis


Who cares if the car wouldnt mesh well in America...hes not in America

[Tommy AC89 Thailand]

yeah sorta slow soundin to me too. looks like your got a gauge for everything in it. Wow. . .you need to loose all that weight you got in it.. And boy i wouldnt drive that at the track around here only runnin high 15's with the bright green paint i probably would get jumped at the track.. lol maybe take the body kit off primer it black then get rid of all the stickers on it take out all the interior even the door panels everything but the dash and the drivers seat. take the old gas tank out and put in a allluminum one in the trunk then drop it a inch in the rear and a 1 and a qyurter in the front. and run 15 inch rims with tires on it with low tire pressure. looks fun thought but just wouldnt run that car here in america. You might get shot in detriot if ya did.. lol
There has to be something wrong with a h22 in a 3gee to only run a 15. Thats sorta depressing to see that.I was thinkin the h22 to at least run a 13 in a 3rd gen. Even with slight mods to it .

15.31 sec not to bad for my car because, when I ran the best recorded Honda Prelude a lot modified with the engine H22A it's ran just only 14 sec something...
And the other resson I use this car everyday why I have to take off all the parts from my car?
About the gauges I swap brown console Japan spec so I took its off already.

[-$MOKIN-]

WOW. a bUNCH OF PPL SELLING ME ON HOW 15.3 ISNT BAD. Well PEOPLE 15.3 IS A VERY WEAK AND SLOW QUARTER MILE TIME. GET OVER IT.

[Rendon LX-i]

WOW....i would beat you then...im not beening mean i ran that with i/h/e and cam. My buddy has a cb7 with a jdm h22a and running 13.9 all day...so something is wrong man. Ethier your not shifting fast enough or Not taking off the line quick enough...dont burn out so much..h22s have alot of Toque...I was runing your time stock with some minnor mods now that im boosted im hopeing for 13's lol... Dont get mad im just telling SOMETHING is wrong. has to be

p.s Its also has to do alot on how you drive....i learned alot buy some buddys..

Rendon

[cubert]

WOW. a bUNCH OF PPL SELLING ME ON HOW 15.3 ISNT BAD. Well PEOPLE 15.3 IS A VERY WEAK AND SLOW QUARTER MILE TIME. GET OVER IT.

Hey...how fast is your H22 swapped 3gee?


Oh...wait

[88LXi68]

WOW. a bUNCH OF PPL SELLING ME ON HOW 15.3 ISNT BAD. Well PEOPLE 15.3 IS A VERY WEAK AND SLOW QUARTER MILE TIME. GET OVER IT.

Agreed. If I did that swap and had that time I wouldn't be happy.

Hey Tommy THailand...what mph did you trap?? what was the 60' ft?? That could help us tell if it is your motor/tuning or your driving!!