Front sway bar.
Im upgrading my suspension slowy...Got stock front bar with Energy suspension endlinks. I also have Vigor rear, as for the rear its awesome tight turns, not like it used to be back end would want to slide. But I was reading here on the board and the 88.89 accords have bigger front sway bars. Do you guys think i would benefit froms this...I think i would. When im turning now seems like my front end hugging the ground good but seems like it wants to roll over kinda lol.
200+ ALL MOTOR LS VTEC
Isn't making a FWD car too stiff in the front bad for understeer? Maybe replace all the balljoints and get polyurethane bushings first and see how that goes.
my cars a CA1 so its a base model with a small front swaybar and a even smaller rear one, when i did my rear disc swap i put the CA3 Si rear bar on. my front shocks are koni yellow on 1/2 way and rears are stock shocks with king lowering springs and all i got to say is it handles neutral to the days, i have bald tyres on the front and still cant find a corner that wont under or oversteer (not that im trying that hard as i dont wanna hurt my car)
as of balljoints there new an wat notOriginally Posted by Joay
200+ ALL MOTOR LS VTEC
i have the rear 88-89 bar in the back of my dx with the small dx one in the front...its good but it does not handle like my 22mm rear bar with my 24mm front ST bar.....i just got the bar because it came with poly bushings.
1989 Honda Accord LX-i
B18c1 swap since 7/2011
175whp and 132tq
Redzone tuned
Um, are you getting oversteer at all? It wouldnt hurt i guess, but the effects might/prob will change the balance of the car.
i have an addco front bar and st rear bar w/ revalved konis and higher rate rear gc springs and my car is neutral but when pushed hard enough I can get oversteer.
'88 LX-i Coupe --- LS/Vtec
'08 Accord EX-L 6-6 --- Daily Duty
I got a little oversteer with the ST bar you sold me
http://pages.videotron.com/omus
3geez member since July 12 2000
I need these parts!
https://www.3geez.com/forum/showthread.php?t=67742
if you get a little oversteer with that bar then you need to drive my car with the 4g rear bar.I got a little oversteer with the ST bar you sold me
'88 LX-i Coupe --- LS/Vtec
'08 Accord EX-L 6-6 --- Daily Duty
lol.....IM going to get a 88/9 accord bar.. if a 91 accord is hallow theres no point...or i should just check..going to auto x next month.
Stock 86-87
F: 20.5mm (approx 13/16”), 0.69
R carb: none
R fuel injected: 12mm (approx 15/32"), 0.73
Stock 88-89
F: 22.5mm (approx 7/8"), 1.00
R carb: none
R fuel injected: 13mm (approx 1/2"), 1.00
Regradless the 88/89 accord bigger...So should make a difference eh. But im going to compare the.....Its just seems like the front end loose idk...not as stiff as the front.
200+ ALL MOTOR LS VTEC
Just to clear it out for me, Can you use 4G front bar? or rear? we didnt get any facelifts here, so the 86-87 all the way. to 89. only B20s came with facelift, but they are, you know what they are.. needle in the hay stack...
Want steffer susp..
Its prttey fnuny how you can raed tihs eintre snetnece with all tehse ellters out of palce...
My Build Thread
I know that the rear sway bar works. Messy can you comfrim this. Alot of peeps saying that the front works to. so idk
200+ ALL MOTOR LS VTEC
Well then I just try it and see..
Thanks Randon
Its prttey fnuny how you can raed tihs eintre snetnece with all tehse ellters out of palce...
My Build Thread
no prob. im going to try it also. I guess the hollow front bar in the 4g are stronger.
200+ ALL MOTOR LS VTEC
im interestered.
i got the progressive 4th gen bar....22mm of rear bar....i love driving in the freeway...i can do 80mph lane changes...rear grabs quick
1989 Honda Accord LX-i
B18c1 swap since 7/2011
175whp and 132tq
Redzone tuned
i like that idea
^^ me too. lol
Need to see some pics messy. dont hide your shit guy lol. Show up man. i need to see how it set up. i also forgot what you had in front.
200+ ALL MOTOR LS VTEC
http://www.jegs.com/i/ADDCO/020/792/10002/-1
the front addco for 3g $173.99!
http://www.jegs.com/i/ADDCO/020/379/10002/-1
the rear addco for 3g $137.99
Last edited by Civic Accord Honda; 03-11-2009 at 09:57 PM.
1988 Honda Accord LX-i Coupe 123k miles.
this a pic of frantiks front ST bar when we installed it
When Messy and I installed his rear 4th gen bar it was easy except for the part where you have to drill into the frame to install the sway bar brackets, I hated that part.
A little oil leak.LOL. There a set in the for sale section front and rear st bars for 200 DAMN.. somebody needs to get that
200+ ALL MOTOR LS VTEC
you know addco carries bars for our cars, i found one for cah for an 81,they go all the way to 74 on civics, and i'm pretty sure they have just about any accord bar you could want. they even had a rear bar for the 81. I mean these people carry deleorean sway bars.
Posting Permissions
Reply With Quote
Bookmarks