how to adjust the speedo in 89 lx-i?

[Dr.slipperz]

is it possable to adjust the speedo in a 89 lx-i automatic? and another thing what are common motor swaps, i know the b20a and stuff along those lines and i have heard of some b18/b16 swaps but the company that made the mounts went outta business... so does anyone else make them and would any v6's fit like the j30a or anything like that.....

[russiankid]

https://www.3geez.com/forum/forumdisplay.php?f=7

Read up. V6 won't fit, someone is making the mounts, look in the link. Adjusting speedo as in adjusting to wheel size?

[Civic Accord Honda]

anything can fit if you have the time and money
and idk what you mean by adjust the speedo?

[Demon1024]

I came up in this problem a while back when i got some different rims/wrong size tires. I dont think you can adjust it. One thing I thought of was to get someone else with a car to drive to 10,20,30,ect and mark each on the gauge itself. The easiest way imo is to download the white gauge face and open paint/photoshope/whatever and remove the lines and # ( or just cut a circle of paper) and remark them driving*.Then take the angles from center and incorporate them into a new printed face.

*For the love of god do this where there is no other traffic!

[LX-incredible]

I believe someone fit the 2.7 legend motor in the 3g a while back... It was a squeeze. Not really worth it imo.

Only way I could see adjusting the speedo would be doing away with the cable and original speedometer/cluster and going electronic, then getting the compensator (if they even make one).

[Hauntd ca3]

some auto electricians can do what you ask.
you would have to figure out the diff in the rolling circumference of the new tire and the oem tire and work out a difference in a percentage and the auto electrician shoud be able to make the right adjustment to the speedo gearing.
the easy way is just match the new tire diameter to the old
i.e a 205/50/15 is about the same as a 185/70/13 i think

[Dr.slipperz]

https://www.3geez.com/forum/forumdisplay.php?f=7

Read up. V6 won't fit, someone is making the mounts, look in the link. Adjusting speedo as in adjusting to wheel size?

is it that bad of a clearance issue with thee v6? and yes it cause of tire size the guy i got the car from put 17's on it so was wondering if possable but screw it im just gonna sell the 17's and buy some rota's lol cause i know them wheel aren't light

[Dr.slipperz]

and i was thinking about going b18a1(90-93 integra) with the ys1 (93 integra stick) but i know i would have to figure out something for the shift linkage......i think i seen a thread sowing what you need to do so ill look again btw thanks

[TWOLOUDNPROUD]

and i was thinking about going b18a1(90-93 integra) with the ys1 (93 integra stick) but i know i would have to figure out something for the shift linkage......i think i seen a thread sowing what you need to do so ill look again btw thanks

just use the shift linkage bar from the 90-93 integra thats what i am useing on my swap.

https://www.3geez.com/forum/showthread.php?t=67310

[A18A]

some auto electricians can do what you ask.
you would have to figure out the diff in the rolling circumference of the new tire and the oem tire and work out a difference in a percentage and the auto electrician shoud be able to make the right adjustment to the speedo gearing.
the easy way is just match the new tire diameter to the old
i.e a 205/50/15 is about the same as a 185/70/13 i think

this tool helps (Y) http://www.miata.net/garage/tirecalc.html