Custom Strut Braces for the Rear..

[labeledsk8r]

^^ i had some listings saved of a guy selling them for 18 shipped but ebay deleted them

just remember those crap ebay ones are mostly useless... u can bend them in half by hand lol but theres plenty 4g bars out there that are good/semi good

this is good work, if someone wants to try the 5th gen bars aswell on these mounts you can order one up and when your done send it to me LOL

[Tdurr]

^^ i have one on my rx7 and it deff is strong. I dono what crappy e-bay brand you used lol. My friends have them all on their cars too, no problem at all.

btw, mushroom toy said he will get the measurements if they are needed, so just pm him what you need.

[Civic Accord Honda]

just remember those crap ebay ones are mostly useless... u can bend them in half by hand lol but theres plenty 4g bars out there that are good/semi good

X2!!
stick with like DC, megen, and neuspeed etc .. ebay bars dont really help its just all in peoples head because they added something to there car so they think it made a diffrence just like people that put a short ram intake on and then they think it made there car faster even though it didnt .

if your going for looks then yes get a ebay bar but if you want something that actully helps get a real one

[3gmodifier]

youre right, I thought about it as well, the third point can be mounted under, where 6'9 speakers mounts, the point of it was to get space for SUB box as its almost a must in nearly everycar nowadays.. and to bend it without mounting it is a flexible towerbar, as it need to have a tension to have any effect.

Tdurr youre right about me having big plans, I dont want to get ahead of my self right now, because I need to setle down abit, as I mentioned that the workshop I can use now, I'll be in for about 3 weeks from this manday. So complete towerbars will be not now, not yet. But I want to make it happen for us.

It be really good to have those measurements of DC bar, and better yet a trace of it, and a scan 1:1 and a reference scale on a side.
I can post an example of what measurements I'll be needing tomorrow..

Thanks everyone, You get me motivated

i have a spare set of front dc mounts. i can send them to you so you have the real thing in front of you!!!! let me know. i am down to help ware ever i can.

[MessyHonda]

i would like to have a bar that would clear the b16 mani

[Rendon LX-i]

wont a b16 will?...shit i hope so

[MessyHonda]

nope..if you have a b16 mani the dc bar hits it

[Rendon LX-i]

well FUCK. aint that a bitch

[3gmodifier]

i have a spare set of front dc mounts. i can send them to you so you have the real thing in front of you!!!! let me know. i am down to help ware ever i can.

to, tomisimo!!!!

[itzdave]

so when am i supposed to pay and get this shit sent to me? i cant WAIT!!! i need front and rears!

[LX-incredible]

X2!!
stick with like DC, megen, and neuspeed etc .. ebay bars dont really help its just all in peoples head because they added something to there car so they think it made a diffrence just like people that put a short ram intake on and then they think it made there car faster even though it didnt .

if your going for looks then yes get a ebay bar but if you want something that actully helps get a real one

...

Isn't evolution wonderful. Now we just need to work on its spelling and grammar.

[Tommy AC89 Thailand]

My custom strut braces for the rear..

[Tomisimo]

i have a spare set of front dc mounts. i can send them to you so you have the real thing in front of you!!!! let me know. i am down to help ware ever i can.

Ok, well there is no time to send those as I'm quiting here in short time, but if You get me drawings of it and a trace. It would be fastest. Shipping take 2 weeks, by that time I'm gone from here.
If you can, take a A4 paper and trace foot plate on it, and then scan it on the computer and PM it to me, as well as hole diameter sizes and length of fastening plates, and hight. Here is mostly what I need, but the trace is important, as Plasma cutter is optical, it can trace the line.




Messy tell me how much more room you need to clear B16 Intake= maybe I can make fastening plates a bit higher so it will clear.

Dave, dont get to exited here bro I'm working on it now, I just got materials yesterday and soon I'll mas produce those, just hold on to that money for now.

ok guys I need to run and do some stuff today, I will keep you all posted and updated.

[Rendon LX-i]

Me to cause i want a b16 mani and if i cant use my bar IDK lol

[Tdurr]

sweet! get him the info asap!!! in cm's not inches btw!

[ghettogeddy]

cant wait

[MessyHonda]

il try to check

[88Accord-DX]

I'm down for one, front strut bar.

[Rendon LX-i]

Ok, well there is no time to send those as I'm quiting here in short time, but if You get me drawings of it and a trace. It would be fastest. Shipping take 2 weeks, by that time I'm gone from here.
If you can, take a A4 paper and trace foot plate on it, and then scan it on the computer and PM it to me, as well as hole diameter sizes and length of fastening plates, and hight. Here is mostly what I need, but the trace is important, as Plasma cutter is optical, it can trace the line.




Messy tell me how much more room you need to clear B16 Intake= maybe I can make fastening plates a bit higher so it will clear.

Dave, dont get to exited here bro I'm working on it now, I just got materials yesterday and soon I'll mas produce those, just hold on to that money for now.

ok guys I need to run and do some stuff today, I will keep you all posted and updated.

Me to bro..im getting a b16 mani here soon. would be sweet to rise up the mounts so we could use are dc bar still

[Tdurr]

rendon, get him the measurements! he can raise the mounts a few cm's to clear a mani! lol just gotta get him the info asap!

[Rendon LX-i]

Well what does he need measurements from...from what point to what point shit like that. details lol

[Rendon LX-i]

Well Victor x manifold clears with no probs thats nice but 340 some..ummm idk...but i guess its worth it...

[Tdurr]

Well what does he need measurements from...from what point to what point shit like that. details lol

the pic u quoted, it has everything he needs lol, just get measurements in cm, and to the nearest hundredth if u have good tools.

[Tomisimo]

ok ppl, Today I've started to fabricate mounts, first and hardest thing is done, the pain staking drawing progress takes tall on me, bu anyway. as I promised to keep you all updated here som picks for ya
Here drawing, there is endless line

and fork mounts, raised 6cm.

here some cutting start

in the middle

and finish

and one sample I took for pick, it needs to be cut and grindet, but that I will be doing tomorrow


I also made Video, I see if I get it uploaded, because its like 92Mb big, so, we'll see

[markmdz89hatch]

that's some VERY cool shit right there. ...now get going on welding everything up Tom. VERY cool.

oh, and that's one BAD ASS machine right there. Do they have a punch available to you at that school?