Is there a USDM oil pan gasket for B20A?

[2ndGenGuy]

Title says it all. Can't find it in the FAQs or by searching my ass off. I tried a B20A5 oil pan gasket and it's close, but no cigar. The A20 one doesn't look like it would work, but I did not try one yet.

[2ndGenGuy]

After more searching, I think that's a big fat NO. I think it should also be a sticky that there is no USDM oil pan gasket, as it's a pretty common part to need. Or there needs to be a parts list for parts you can't get for the B20A here. But whatever, I'll call TwoLoudnProud's supplier and see if I can get just a pan gasket from them. I don't need the whole set right now. Maybe down the road, but then I'll have a set without a pan gasket. :(

[carotman]

You're right. There's no pan gasket that will fit :(

I ordered a couple of spare ones last time so I should be Ok.

You can always use the permatex stuff

['A20A3']

HondaBond FTW

[Ichiban]

I sifted through pages of spanish and found the actual AJUSA corporation listing for the B20A.

http://www.ajusa.es/CataOnLine/eng/i...m=aToxNzgzMzs=

[AccordB20A]

catalogo even good find

[lostforawhile]

After more searching, I think that's a big fat NO. I think it should also be a sticky that there is no USDM oil pan gasket, as it's a pretty common part to need. Or there needs to be a parts list for parts you can't get for the B20A here. But whatever, I'll call TwoLoudnProud's supplier and see if I can get just a pan gasket from them. I don't need the whole set right now. Maybe down the road, but then I'll have a set without a pan gasket. :(

why are you having trouble finding a usdm oil pan gasket? it's not uncommon for the dealers to not carry that stuff as it's well supported by the aftermarket. I used a felpro last time, it's fine.

[2ndGenGuy]

why are you having trouble finding a usdm oil pan gasket? it's not uncommon for the dealers to not carry that stuff as it's well supported by the aftermarket. I used a felpro last time, it's fine.

Thread title ^^^

[lostforawhile]

Thread title ^^^

wouldn't usdm and b20a be an oxymoron? they make some pretty good gasket making stuff now, will seal an oil pan up easy. not rtv, but the stuff that is designed to actually replace the gasket itself.

[AccordB20A]

someone try an a20 gasket! lol

[Ichiban]

someone try an a20 gasket! lol

I'd fuckin explode if it actually worked..

[russiankid]

Would the part numbers from Honda be the same all over? If so then just have one of the NZ guys find out the part number for the gasket and then cross reference the part number.

[mykwikcoupe]

yes we tried it when he came up and they arent anything even close to each other. Sorry about that again jon

[TWOLOUDNPROUD]

B20a oil pan gasket by AJUSA P/N 14061000 go here to get it Supplier MACHINE PRO in Florida 1-800-741-4496 ask for Randy

[2ndGenGuy]

yes we tried it when he came up and they arent anything even close to each other. Sorry about that again jon

No worries! :)

[RobT5580]

OEM JDM ones are no longer available to my knowlede along with many other parts!

[AccordB20A]

you got the last b20a head gaskets, john got the last sump gaskets... arrrrrr lol im selling all the parts i could be using to the USA and now theres nothing for me to use lol

[2ndGenGuy]

Yay one is on my motor and the other one is sitting in my house. The last OEM B20A sump gasket in existence!! All MINE!!!

[carotman]

Oh, I'm glad I have a couple of spare ones then.

[snoopyloopy]

Yay one is on my motor and the other one is sitting in my house. The last OEM B20A sump gasket in existence!! All MINE!!!

get it copied and carefully analyzed!

[Nafs Asdf]

Looked up some EDM part numbers in the EPC

11251-PH3-000 - oil pan gasket, all EDM B20A's

12251-PH3-601 - head gasket, B20A2
12251-PH3-661 - head gasket, B20A8

12251-PJ5-602 - head gasket, B20A1 (2g prelude)

Weird how they all have different part numbers for the head gasket, aren't they all the same?