Bondo out trunk lid tail lights and paint?

[-$MOKIN-]

Got a 89 2 door trunk lid which has a different tail light on it.. it has plastic attacted to the light on the bottom instead of the metal plate under it.

Had a great idea to maybe bono the plastic and sand it then pain it to loose the lights on the lid and paint it the same color as the car. i was thinking of leaving the line at the top of the light to lid and just doing the plastic piece.

Anyone see any problems i might run into or got any ideas on how to make this work?

Bondo pros out there gie me a couple tips on bondo on the plastic . can i mold it to the lid and have plastic on one side and metal on the other or should i leave the gap? And does it matter if its all goin to be bondoed or can i just take out the lines in the lights with it?

Paint pros .. . . Am i goin to have a problem when i get thia car painted that they might say they cant paint it?

[84Accord]

are you trying to get rid of the tail lights in the trunk portion?

[-$MOKIN-]

yea and i wanted to paint the inside where the plate sits too.

[84Accord]

i think if you just bondoed over the plastic that itd eventually crack and come off. what i would do it take off the tails and weld in a piece of metal where the liscense plate and tails go. then paint it. it would probably look a whole lot better

[-$MOKIN-]

see thats where i come into the problem i dont weld....lol
I never thought about it cracking..damn but if i just keep it in the edges where the differnt colors come togther there is a gap right there. like a little line. what if i just fill that in and sand it? with fiberglass bondo ?

[LX-incredible]

Only a jackass would bondo over taillights. I've never seen one that hadn't cracked.

[-$MOKIN-]

JACKASS ?


OK maybe bondo isnt a good solution. then ..
i guess the only way is to take it somwhere and get the metal welded in.
I bet there goin to charge me out the azz.

[84Accord]

JACKASS ?


OK maybe bondo isnt a good solution. then ..
i guess the only way is to take it somwhere and get the metal welded in.
I bet there goin to charge me out the azz.

you could try bondo but there is a big possibility of it cracking. the cheapest way would be to find a friend with a welder and experiment with welding.

[Civic Accord Honda]

Only a jackass would bondo over taillights. I've never seen one that hadn't cracked.

dammit. you said exactly what i was going to say!


do it the proper way which is don't do it at all.

[BITESIZE]

You could fiberglass over it too. It would be a good way to learn.

[russiankid]

......why?! It looks like ass.

[BITESIZE]

^^that's our opinion, but he might like it. To each their own eh?

[-$MOKIN-]

Yep to each my own. if i could i owld like to jsut weld a piece in and have no plates there then move my plates to the bumper with usung a intergra rear bumper.
To much tho. and thanks for all the sarcasim ..There sint nothin like it. What ever happens. my ride will still be rollin and hopefully will be done someday. Thanks for the input hope your guys projects are commming out like mine is

[Joay]

So, like (sorry, A18A)...



?

[84Accord]

looking at that ^. doesn't look as good. maybe if you kept liscense plate where it originally is.

[cubert]

looking at that ^. doesn't look as good. maybe if you kept liscense plate where it originally is.

Yea..if the plate were kept in the trunk lid i think it would look decent

[lostforawhile]

if you can't weld then you are going to need to use fiberglass, you will have to back it up with something too. bondo will never work. if you put the plate in the rear bumper, you need to find something with a recessed plate and add that section to the bumper.

[Civic Accord Honda]

if you can't weld then you are going to need to use fiberglass, you will have to back it up with something too. bondo will never work. if you put the plate in the rear bumper, you need to find something with a recessed plate and add that section to the bumper.

or he could be like all the ricers and just scerw the rear plate on on to the side of the bumper tilted sideways

[-$MOKIN-]

I THINK ITS BAD AS HELL. Its not just throw a piece of metal on there and weld it. you actually need like 4 pieces to weld together . But i like the idea. Sorta old school shaving.

[Tommy AC89 Thailand]

Swap it to VIGOR trunk like this

[Joay]

Swap it to VIGOR trunk like this

Did the stock rear bumper hold the license plate on a Vigor?
I agree that would look far better than hacking up the stock USDM trunk.

[mykwikcoupe]

ok yes but did the voigor come in a coupe style to help usa coupe owners out since the sedan lights dont fit the coupes? Also how much would shipping a trunklid halfway round the world cost?

[A18A]

nope they didn't come in coupes, but they can be made to fit as seen here:

[Hazwan]

^^ Looks cool, but I can't stand the uneven gaps.

[Tommy AC89 Thailand]

nope they didn't come in coupes, but they can be made to fit as seen here:

Yes. I have seen this photo one time before.