HOW TO: DIY catch can

[import racer]

Can anyone answere me please on the right way to do this.

[Tdurr]

So is it one hose to the black box and one to valve cover from catch can,or is it both hoses to the valve cover after addubg another nipple?I want to run a vented catch can.And what do i do with the pcv valve.Thanks

you can take the valve outta the black box, or leave it.

But you run one line to the valve cover, one to the black box and both go to the vented catch can.

OR

you run one line to the vc, one to the black box, and one from the catch can to the intake with no vent filter.

[import racer]

Thank you,the valve is in the black box behind the motor with the hose attached to the oil pan .thats what your talking about right.

[import racer]

What do i do with the pcv opening and seperator hose connections ,do i have to plug them or can i just leave them alone.

[import racer]

bump!

[89T]

ttt

[import racer]

nevermind.

[Rendon LX-i]

Opp

[89T]

What do i do with the pcv opening and seperator hose connections ,do i have to plug them or can i just leave them alone.

ok from what i gather you are going with a vented catch can.
remove the hose from the valve cover and extend it to the vented catch can. plug the port on the other end.
do the same with the black box.....

sorry for not keeping up with this thread.

[Tdurr]

to be honest i left the box on, and removed the hose from it. it doesnt leak on anything. i cleaned it out with gumcutter. love that stuff. i imagine a freeze plug would work fine as a blockoff plate though.

mine leaks. its really annoying. I think all my pressure is spraying outta the bottom hose. So what im thinking is that the bottom is the oil return to the pan once it gets separated. i wanna plug where the black box goes. anyone know what size the hole on the block is? I need a freeze plug for it lol.

[89T]

you can remove it bro....looks hella good.

I went for a drive and almost got high and why cuz my gurl wouldnt open her damn window...i hit full boost and i get some smoke not alot but some and im like fuck i started smelling it so after awhile im like shit...SO i open the window and no more smelly im like thank go...then she rolls the bitch back up lol...wtf.

Anywho it works...didnt catch much..you see some but not shit ....very affective for sure...alot better then my old setup.

[Rendon LX-i]

I think that was a blow by issue heheh

[import racer]

Can you ditch the black breather box and hook it to the oil pan or not.

[89T]

I did And it seems to be working well.

[import racer]

Did you weld on a smaller tube or did you use bigger hose.

[89T]

I think i used a 3/4' hose.(?)
It's been a minute and I have not put it back on yet.

[Tdurr]

cool no one answer my question...

[89T]

id say close to 1 inch.

[Civic Accord Honda]

i need to make cah catch can part 2! gonna go with a sealed one this time and run it to the intake manifold need one pretty bad on the accord getting a shit ton of oil in my intake and intake manifold

http://www.ej8squad.com/thread-9184.html
good idea of what my next one will be like except the pcv line will also be connected and the return line will be ran to intake manifold

[import racer]

Hey guys if i remove the breather box,what do you use to plug the hole in the block?

[89T]

freeze plug.

[import racer]

Anyone know what size.

[89T]

I'll let you know.

[gfrg88]

sticky please!

[89T]

I've tried.