I have a couple empty cylinders laying around. I need to get off my ass make one and do my Vac removal at the same time.
And than figure out how to hook up the catch can
rendon, am i crazy or is your car missing the IACV on the intake manifold?
-Harvey
I have clean oil with stock stuff.
Sam
1989 Accord LX: Sold with 208k-now somewhere around 230k with new owner
Current:
2014 Elantra Sport 6MT
2000 Montero Sport 4x4 (beater, trail rig)
it's the only pic i have right now. but you can see the crazy angle i had to run the line, just so i could not get in the way of the axle, and not kink the line going to the can. it kinda loops around and gently sits on top of the master cylinder cap.
-Harvey
ehh..it's not that bad.
but if you have the tools and resources and time, then remove the pan, baffle it, and re-do the line for the can, and then re-install it.
-Harvey
ah so u dont have teh return line and just capped the manifold right? thats the way ima hook mine up
1988 Honda Accord LX-i Coupe 123k miles.
ti
Yeah i have to do that...ill prolly do it black...i dont like mix match shit lol
Well for me it was easy...as long you have a step bit which was 14 bucks and a the right tools...i had a boring bit and a vise....i didnt have a flaring to but i used the boring bit to smooth it out...i say a 2. maybe 3 but if you not skilled in making nothing maybe a 5...But i know for me and you it was a 1 lol
Thanks once again bro for making a such legit catch can. ANd now i dont have to worry as much lol...looks alot better the the nos status can.
200+ ALL MOTOR LS VTEC
this is a good thread. +1
-Harvey
So can I run one to the oil pan and one to valve cover or won't that work.
yay i just got done making one!!
1988 Honda Accord LX-i Coupe 123k miles.
what i think he meant was run one line from the catch can to vc and the other to the black box or tube.
the answer :yes you can.
un-motivated!
someone make me an offer i just could not say no to.
3GR
x2
200+ ALL MOTOR LS VTEC
just installed mine and have a question.. do i keep the pcv valve? or do i just remove it and run the line straight to the box.
and the epoxy did not get along with my paint and the paint chiped off the in aera.. but there are no leaks i vac tested the can lol ima put some jb weld around the bung anyway though when i add another one for the valve cover (currently have the valve cover ran in to the intake) and yes i do need a vaccum cap for the manifold will get one tomarrow
http://s242.photobucket.com/albums/f.../catch-can-y0/
EDIT:
top 4 pics are the finished pics for the night
and i decided to run the line from the oil separator straight to the catch can without pcv valve... and im going to add another bung to the catch can and add the valve cover line to it, also going to get some vac caps since the hoses with the bolt in it are gay lol
Last edited by Civic Accord Honda; 06-04-2009 at 09:02 PM.
1988 Honda Accord LX-i Coupe 123k miles.
you can remove it bro....looks hella good.
I went for a drive and almost got high and why cuz my gurl wouldnt open her damn window...i hit full boost and i get some smoke not alot but some and im like fuck i started smelling it so after awhile im like shit...SO i open the window and no more smelly im like thank go...then she rolls the bitch back up lol...wtf.
Anywho it works...didnt catch much..you see some but not shit ....very affective for sure...alot better then my old setup.
200+ ALL MOTOR LS VTEC
Bookmarks