bad dent on car

[89lxisedan]

hey all i got this nasty dent on the back of my 89 lx-i and was wondering is it easier to work with what is there or go to the junk yard and cut what i need off another 3g and weld it on? here are some pics of the damage. the previous owner was rear ended and it was all caved in when i got it



http://s681.photobucket.com/albums/v...9lxisedan/lxi/

[Civic Accord Honda]

remove tailight and trunk lineing grab the section and start yanking it forward, and then replace that little metal peace under the tail...

[89lxisedan]

thanks i was worried id have to cut it all off another one

[Civic Accord Honda]

Yeah both of my 3gees were damaged very similar to that. and i got it pulled straight on both of them

[lostforawhile]

Yeah both of my 3gees were damaged very similar to that. and i got it pulled straight on both of them

he means without 5 gallons of bondo

[Civic Accord Honda]

he means without 5 gallons of bondo

i used no bondo or anything just my hands

[lostforawhile]

i used no bondo or anything just my hands

you bondoed your hands?

[AccordB20A]

i replaced the whole bottom piece below my tail light cause it was rusted out, mate welded one from another car in there and it looks okay

[89lxisedan]

thanks all. i'm gonna try and pull it and then replace under the tail light but worse case senario i go to junk yard and cut it off the 87 sedan they have as much as i don't want to take from the good shell of another 3g

[markmdz89hatch]

Any better daytime pics of it?

Where in Mass are you?

[89lxisedan]

i'm in a town called westford right out side of lowell and i'll get some daytime pics tomorrow and more angles