Looking for 13" steelies

[russiankid]

Anyone have two laying around? PM me if you do. They're not worth anything thats why I don't want to pay a lot for them. They don't need to have tires on them.

[88LXi68]

Anyone have two laying around? PM me if you do. They're not worth anything thats why I don't want to pay a lot for them. They don't need to have tires on them.

I have 2. they are the kind that use the honda centercaps.

edit...found a pic on my photobucket

[russiankid]

Would I need the center cap to mount them onto a 3gee?

And I need them to fit a 185 tire.

[88LXi68]

Would I need the center cap to mount them onto a 3gee?

And I need them to fit a 185 tire.

they will fit without a centercap. if you use a centercap you can't use a hubcap.

they should fit a 185...I don't see why they wouldn't.

how is $10 + shipping costs?

[russiankid]

$10 for both? How much is shipping to 19352.

[2ndGenGuy]

Umm you might want to measure the PCD on those wheels. Those are 4x120mm 1g Accord wheels.

You call a local wrecker for wheels? Every one in my area sells steelies for $5 each.

[russiankid]

I went to a hard today and the guy has a few 3gen's. One has two steelies with pretty good life left on the tires for $15 each. That may be cheaper than getting steelies and putting tires on them.

[88LXi68]

Umm you might want to measure the PCD on those wheels. Those are 4x120mm 1g Accord wheels.

You call a local wrecker for wheels? Every one in my area sells steelies for $5 each.

I could have sworn they were 4x100, but after looking at those pics more they do look a bit more spaced. I will have to pull them out of the attic and check them out.

[russiankid]

I went ahead and got the steelies from a junkyard. They came with tires that still have lots of life left so they'll do much better than what I currently have.