Page 1 of 3 123 LastLast
Results 1 to 25 of 63

Thread: B20a headers! Headers! For the b20a!!

  1. #1
    LX User OldSchool86's Avatar
    Join Date
    Sep 2008
    Vehicle
    1986 Accord Lx 5Speed
    Location
    A T L a n t a, GA
    Posts
    138

    Exclamation B20a headers! Headers! For the b20a!!

    GUESS WHAT?! I have found a better header than the H22 header.
    !!YES THATS RIGHT FOLKS!!
    Although it involves the same mods to the bolt holes as the H22, on this header the ports match perfectly to the head and also it comes from an engine with the same forward lean as the B20A. Unlike the h22. Thus you do not have to chop up the tubes to make it fit around the oil pan and meet the cat.(NOTE: this does not mean that it will just bolt up to the cat) You will however have to wedge it over the dip stick tube, unless you can pull your tube out. mine is stuck in. The down pipe also has the same twist in it to conform to the oil pan.
    Give up........
    Last edited by OldSchool86; 06-30-2009 at 05:52 AM.



  2. #2
    3Geez Veteran
    Join Date
    May 2005
    Vehicle
    89 LXi Sedan (sold) - Car free now, with hella bikes
    Location
    San Jose, CA
    Posts
    5,487

    Re: B20a headers! Headers! For the b20a!!

    are u gonna say what it is?

  3. #3

    Tomisimo's Avatar
    Join Date
    Sep 2006
    Vehicle
    Honda Accord's EXi #1 [A20a4] R.I.P & #2 [B20a2]
    Location
    Norway/Europe
    Posts
    1,794

    Re: B20a headers! Headers! For the b20a!!

    what he said ^^ sounds interesting

    Its prttey fnuny how you can raed tihs eintre snetnece with all tehse ellters out of palce...

    My Build Thread

  4. #4

    2oodoor's Avatar
    Join Date
    Jun 2006
    Vehicle
    86 LX JDM B20A
    Location
    Georgia-lina
    Posts
    9,062

    Re: B20a headers! Headers! For the b20a!!

    OK, I chopped up a brand new A5 and made mine.... would rather had and H22 for the fatter tubes though

  5. #5
    LX User OldSchool86's Avatar
    Join Date
    Sep 2008
    Vehicle
    1986 Accord Lx 5Speed
    Location
    A T L a n t a, GA
    Posts
    138

    Exclamation Re: B20a headers! Headers! For the b20a!!

    OK are you guys ready!!!!!!!!!!!!!!.... ITS NOT EVEN FROM A HONDA.
    Ok a little back story first. I work for a Performance car parts store, so i have lots of parts around all the time. so i just went through every header from ever "Make" of 4 banger that there was and to my surprise.

    ITS FROM

    A

    1989

    THROUGH

    1993

    >>>>>>"MITSU*FUCKING*BISHI" ECLIPSE!!!! NON-TURBO FITS!!!

    WHO WOULD OF THOUGHT!

  6. #6

    2ndGenGuy's Avatar
    Join Date
    Jan 2005
    Vehicle
    1981 Accord Hatchback, 1984 Accord Sedan
    Location
    Seattle, WA
    Posts
    9,697

    Re: B20a headers! Headers! For the b20a!!

    I think someone was saying you could use the turbo manifolds from those and bolt them onto a B20A ... hmmm...

  7. #7
    LX User OldSchool86's Avatar
    Join Date
    Sep 2008
    Vehicle
    1986 Accord Lx 5Speed
    Location
    A T L a n t a, GA
    Posts
    138

    Re: B20a headers! Headers! For the b20a!!

    Not the 4g63 mani. but yeah the DSM turbo mani would work to.

  8. #8

    2oodoor's Avatar
    Join Date
    Jun 2006
    Vehicle
    86 LX JDM B20A
    Location
    Georgia-lina
    Posts
    9,062

    Re: B20a headers! Headers! For the b20a!!

    excellant research!!!!

  9. #9
    LX User OldSchool86's Avatar
    Join Date
    Sep 2008
    Vehicle
    1986 Accord Lx 5Speed
    Location
    A T L a n t a, GA
    Posts
    138

    Re: B20a headers! Headers! For the b20a!!

    yeah i went through allot of headers.

  10. #10

    2oodoor's Avatar
    Join Date
    Jun 2006
    Vehicle
    86 LX JDM B20A
    Location
    Georgia-lina
    Posts
    9,062

    Re: B20a headers! Headers! For the b20a!!

    I cut the DP on a prelude B20a5 header for my Accord and it fits great now but it has such a 90 angle right there below the header now I think it is getting a lot of turbulance at some rpm with noticable negative effects. This is good news here!

  11. #11

    'A20A3''s Avatar
    Join Date
    Mar 2003
    Vehicle
    '89 LXi Coupe
    Location
    eastern shore, MD
    Posts
    2,443

    Re: B20a headers! Headers! For the b20a!!

    wow. fail. nice thought tho.

    i have heard of peeps using the turbo manifold from those things on the F series accord motors...
    -Harvey

  12. #12
    3Geez Veteran MessyHonda's Avatar
    Join Date
    Feb 2006
    Vehicle
    89 LX-i(5speed)
    Location
    Bay Area
    Posts
    22,201

    Re: B20a headers! Headers! For the b20a!!

    something new...nice....do they make aftermarket headers for those engines?...not worth swaping something if its just stock

    1989 Honda Accord LX-i
    B18c1 swap since 7/2011
    175whp and 132tq
    Redzone tuned

  13. #13
    LX User OldSchool86's Avatar
    Join Date
    Sep 2008
    Vehicle
    1986 Accord Lx 5Speed
    Location
    A T L a n t a, GA
    Posts
    138

    Re: B20a headers! Headers! For the b20a!!

    yeah. lol. aftermarket headers are what i fitted on my b20a

    Quote Originally Posted by MessyHonda View Post
    something new...nice....do they make aftermarket headers for those engines?...not worth swaping something if its just stock

  14. #14

    2ndGenGuy's Avatar
    Join Date
    Jan 2005
    Vehicle
    1981 Accord Hatchback, 1984 Accord Sedan
    Location
    Seattle, WA
    Posts
    9,697

    Re: B20a headers! Headers! For the b20a!!

    There's one on eBay right now for $50 shipped. Very tempting.

  15. #15
    3Geez Veteran A18A's Avatar
    Join Date
    Sep 2005
    Vehicle
    1988 Honda Vigor
    Location
    New Zealand
    Posts
    8,081

    Re: B20a headers! Headers! For the b20a!!

    lol it would be funny to run a blacktop 4age intake & mitsubishi headers haha

  16. #16
    LX User OldSchool86's Avatar
    Join Date
    Sep 2008
    Vehicle
    1986 Accord Lx 5Speed
    Location
    A T L a n t a, GA
    Posts
    138

    Re: B20a headers! Headers! For the b20a!!

    the b20 is turning out to be one hell of a mut.

    by the way. i dont know if any of yall have seen the post in the sell section but im selling my b20 with all the extras(including the trans and all the stock stuff as well) for $500.00 or i'll will include the trust washers, b20a5 rods and b16 pistons for an extra $320.00 this is the receipt of cost for what i have bought everything for. https://www.3geez.com/forum/showthread.php?t=69507


    Quote Originally Posted by A18A View Post
    lol it would be funny to run a blacktop 4age intake & mitsubishi headers haha
    Last edited by OldSchool86; 07-02-2009 at 08:08 PM.

  17. #17
    3Geez Veteran MessyHonda's Avatar
    Join Date
    Feb 2006
    Vehicle
    89 LX-i(5speed)
    Location
    Bay Area
    Posts
    22,201

    Re: B20a headers! Headers! For the b20a!!

    what gasket kit did you go with...most of the stuff doesnt sound bad.... willing to part anything out?

    1989 Honda Accord LX-i
    B18c1 swap since 7/2011
    175whp and 132tq
    Redzone tuned

  18. #18

    AccordB20A's Avatar
    Join Date
    Sep 2005
    Vehicle
    1987 Honda Accord 2.0Si
    Location
    Stratford, New Zealand
    Posts
    7,407

    Re: B20a headers! Headers! For the b20a!!

    what is the engine code/engine/head/details on this

  19. #19
    LX User OldSchool86's Avatar
    Join Date
    Sep 2008
    Vehicle
    1986 Accord Lx 5Speed
    Location
    A T L a n t a, GA
    Posts
    138

    Re: B20a headers! Headers! For the b20a!!

    Its is the complete JDM B20A gasket kit. from AJUSA. i dont realy want to part it out. this is a realy good price. i paid 112.50 for the motor and trans. the rest of the cost is in parts, witch are all brand new with no miles on them with receipts.

    Quote Originally Posted by MessyHonda View Post
    what gasket kit did you go with...most of the stuff doesnt sound bad.... willing to part anything out?

  20. #20
    LX User OldSchool86's Avatar
    Join Date
    Sep 2008
    Vehicle
    1986 Accord Lx 5Speed
    Location
    A T L a n t a, GA
    Posts
    138

    Re: B20a headers! Headers! For the b20a!!

    B20A / 1051376 from an 85-87 accord chassis with approx 40,000 miles on it. it had a bent rod but block is great but needs to be honed.(typical for a rebuild) the head has been rebuilt. all questionable valves were replaced(to intakes valves to be exact.) all valves were lapped, oil galies cleaned, valve guides were in great condition, head was tested for valve leaks(Dixie Performance) and past with flying colors., head is straight,(Dixie Performance), Weapon R B-Series cam gears,B20A5 Lower Crank gear, Top-line H22 timing belt(you will need the b20a5 water pump),NGK plug wires, NGK iridium plugs, ARP head stud kit, Top-line rod/main bearings, AJUSA JDM B20A complete gasket kit, Top-line B20A5 rods, Top-line B16A Pistons(USDM). I have all receipts. this deal also comes with the Auto trans and all of the stock parts that came with the engine.


    Quote Originally Posted by AccordB20A View Post
    what is the engine code/engine/head/details on this

  21. #21
    3Geez Veteran A18A's Avatar
    Join Date
    Sep 2005
    Vehicle
    1988 Honda Vigor
    Location
    New Zealand
    Posts
    8,081

    Re: B20a headers! Headers! For the b20a!!

    i think he means what mitsubishi engine lol

  22. #22
    LX User OldSchool86's Avatar
    Join Date
    Sep 2008
    Vehicle
    1986 Accord Lx 5Speed
    Location
    A T L a n t a, GA
    Posts
    138

    Re: B20a headers! Headers! For the b20a!!

    90-94 Eclipse DOHC 2.0L non turbo
    http://www.nopi.com/dsp_part_detail....pinum=251+2866
    Last edited by OldSchool86; 07-03-2009 at 07:25 PM.

  23. #23
    LXi User
    Join Date
    Jan 2003
    Vehicle
    1986 prelude
    Location
    charlotte nc
    Posts
    948

    Re: B20a headers! Headers! For the b20a!!

    wow is this for sure
    rhd restoration 2nd gen prelude

  24. #24
    LX User OldSchool86's Avatar
    Join Date
    Sep 2008
    Vehicle
    1986 Accord Lx 5Speed
    Location
    A T L a n t a, GA
    Posts
    138

    Re: B20a headers! Headers! For the b20a!!

    yep.

  25. #25

    2ndGenGuy's Avatar
    Join Date
    Jan 2005
    Vehicle
    1981 Accord Hatchback, 1984 Accord Sedan
    Location
    Seattle, WA
    Posts
    9,697

    Re: B20a headers! Headers! For the b20a!!

    Pics!!!

Similar Threads

  1. S&S Headers
    By dustinksmith in forum Performance
    Replies: 4
    Last Post: 11-03-2010, 11:20 AM
  2. Headers
    By LX-i in forum Wanted
    Replies: 0
    Last Post: 12-11-2009, 06:51 AM
  3. LXi DC Headers on an LX
    By DJ Skillz 187 in forum Carburetor Tech
    Replies: 34
    Last Post: 03-18-2007, 11:34 PM
  4. DC headers
    By KiDAccord in forum Performance
    Replies: 20
    Last Post: 06-14-2004, 08:06 PM
  5. DC headers on b20a????
    By L3G10N in forum General Engine Swaps
    Replies: 3
    Last Post: 10-09-2003, 04:52 PM

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
This website uses cookies
We use cookies to store session information to facilitate remembering your login information, to allow you to save website preferences, to personalise content and ads, to provide social media features and to analyse our traffic. We also share information about your use of our site with our social media, advertising and analytics partners.
     
Links monetized by VigLink