Hey, i really am wondering if there are any kind of air intakes that would fit my 87 honda accord dx, if so wat kind, price around, or wat site i could look at into buying one. also, would 88 and 89 clear bumper lense fit my 87 accord or no? thanx alot for ur help!
the 88-89 lense will not fit on your 87
- llia
88-89 clear lenses will not fit 86-87 accord.
and about intake, you will have to make custom. no one makes for carbed accord.
Alex.
Find a 88-89 front bumper in the junk yard... pull it along with the turn signals. oh cut the wires so that you can use the harness.. the 86-87 turn signal harness is different...
- llia
I make clear bumper turn signal lenes for the 86-87 car's. PM me for pricing and details.
H&R springs revalved Bilstein front struts, koni struts in the rear 195/55-15 Dunlop W-10's Dc Sports header custom cat-back with Dynomax super turbo w/3" Brembo slotted & dimpled rotor's EBC pads
Well, that's what I used to have, wrecked, 7/3/02.
Now I d
yea me im looking for custom intake fr an 87 accord does anyone know how to make one i was old to buy a 92-95 civic intake and cut the longer end about 4 inches and WALA Custom intake for an 87 accord but i dont know please help me out buy emailing me at [email protected] thanx
El Gordo Peligroso
the civic intake only works for fuel injected cars, you have a carb, like me, do a search on "flipping the carb lid" on the board, it's prolly the best "intake" for a carb unless you wanna cut your hood and put in a hood scoop
-Scott
3geez member since Sept. 27, 2001
"its a shame that our society as glorified the thug life. It just churns out fearless idiots with guns " - Pimp86LX
front lense will not fit. flip lid on your carb
Modified Civic Intake. 40/17, NZO rims, Kumho tires.
umm... 87accordboy... your car is an LXi ... therefor you have EFI and may be able to get the 4gen tubing to work... if you had an LX like me then you would have a carb... your fine man... take a look at the civic tubing and see if it runs on the same curves as your LXi... Scott.. if you were refering to 87accordboy you should check out his vehicle info to make sure he has a DX or LX before mentioning the fliped carb lid....
~Nathan~
"There's always something waiting at the end of the road. If you are not willing to see what it is, you probably shouldn't be out there in the first place."
~StOcK PiCs~
If you have an LX or a DX, there's no way you can have an intake cuz your car is carbbed. You can only have an intake if it's fuel-injected.
"Please don't hesitate to use full throttle."
Not True. Check out these pics of various carb CAIs made by people in this forum:Originally posted by 89LXiCoupe
If you have an LX or a DX, there's no way you can have an intake cuz your car is carbbed. You can only have an intake if it's fuel-injected.
by A20A1
by Grant2k
by staticpat
Do a search for "carb intake" on the board and you will find many posts and how-to's.
Last edited by Site; 10-11-2002 at 10:56 AM.
Mike Clark
everyone has an intake in some form or the other... DX, LX, LXi, EXi, SEi... we all do... its just not the same intake setup... as Site has posted... even carbed models can have the EFI looking intake setup...
~Nathan~
"There's always something waiting at the end of the road. If you are not willing to see what it is, you probably shouldn't be out there in the first place."
~StOcK PiCs~
Posting Permissions
Reply With Quote
Bookmarks