It is the inner one closest to the head on the t stat housing. Am I correct?
And the outer one is ?
It is the inner one closest to the head on the t stat housing. Am I correct?
And the outer one is ?
Last edited by Bluntman; 07-06-2009 at 12:03 PM.
Well the sending unit to the gauge is on the side of the housing with one lead wire, I just noticed that. But what sensors are what on top of the t stat housing?
Found it after doing a serach, Thanks anyway.
double check the years, because i believe they were switched from 87 to 88-89... i replaced the wrong one at first and ended up havin to replace both
I have an 88 Lxi. And am working on my friends 87 Lxi. They show to be the same. Does not start after hot, let it sit for a while and starts fine again. The pump is good, spark is good, I changed the main relay, fuel filter,new plugs, wires, cap and rotor, and fuel is getting to the rail. Smells like it floods whan hot and not starting. So through researching, it may be the TW sensor. I hope.
Bookmarks