Attn peeps with factory moonroof--I need your help!

[Jareds 89 LX-i]

Alright ever since I replaced my moonroof glass, there has been a small amount of wind noise coming from the roof. When I took the old one out, some little plastic piece fell out and it looked broken, so I threw it away. I don't remember what they looked like though, or where they came from. Well tonight I decided to finally try and find the cause of this, and I found that, with the roof closed of course, if I push up on the back of the glass it gets completely quiet. It doesn't go up much, just a little bit, but it's enough to make it nice and quiet. So I'm assuming there's a shim type thing or something that goes in here? I was looking at the diagrams on Majestics website, but I couldn't find what might be it (and since I don't know what it lookes like or called, that makes it even harder). I did see the shims for the front brackets, which I do need also, but nothing for the rear. So if anybody gets a chance, if you wouldn't mind taking a peek back there around the rear brackets to see if there's some kind of shim or something that would make it raise just a little bit higher. I'd greatly appreciate it

Here's the diagram. I was thinking possibly #12 or 16, or both.


http://www.hondaautomotiveparts.com/...G+ROOF+%282%29

Thanks!

[smufguy]

try pushing ur moonroof glass up and see if it quietens it a bit more.

[MoonScryer]

Ummm, smurf, he did :p

Jared: when I pull the SEi's moonroof guts out (read: when, not soon), I'll see if I can find that part. I think it is a shim in there, because the roof does slide up a bit into place in the front and the back of the glass.

[Jareds 89 LX-i]

Sweet...thanks Moon! You da man