Ok I've now changed fusebox, fuelpump, 3 different fuel cutoff relays, filters again, stage 1 vac removal, taken tophat off carb and cleaned floatbowl and everywhere else I can get, tightened up venturi's, checked fuel pressure and also checked timing. This thing still will run at idle for about 5min (cold) and once it warms up will simply die. Watching the float bowl it will just drain fuel from there and not refill to indicate a stuck float but it doesn't seem to be? Could really use some more ideas on this if able.
Also new plugs/wires/oilchange and coolant flush. Compression is equal on all cylinders and fine.
To me it almost seems electrical just as if something is getting hot and stops working. Is their some sort of ECM under the dash or anything that could control anything? I've verified with timing light that spark is still present even when fuel isn't. Is their any wiring under or around the dash area mainly stereo area that could cause any problems with fuel delivery because my stereo was literally pulled out by the previous owner plastic and all. Something that looks like an ECM is laying on the center hump.
Ohh if I crank the key back and forth 10 times (priming) and give a little gas it'll fire up and run until the float bowl empties again. If I knew for sure that a weber would fix any problems I'm having I would just do that and forget it however I don't want to just throw money at something that causes issues.
I appreciate any help with this also.
Bookmarks