Page 1 of 5 12345 LastLast
Results 1 to 25 of 123

Thread: Converting DX to DX-I project.

  1. #1

    conozo's Avatar
    Join Date
    Jan 2005
    Vehicle
    1988 Honda Accord DX, 260,000 Miles, Daily Driver
    Location
    Fort Wayne, Indiana
    Posts
    1,156

    Converting DX to DX-I project.

    Heres the story: My tires on my wheels need replacement. Last time it cost me $400 with a buy 3 get 1 free. This time im much poorer. So i realized that i could fix everything on the car, get new winter tires, and have some spare parts if i buy a parts car. So the search began, three weeks later i found an 88 LXI 5 speed for $300. Body exterior and interior are in bad shape, engine, transmission, and FI parts are all in good condition. Also my car just rolled over 200,000, so to celebrate that, i'm giving it an upgrade.

    I will be converting from carb to fi, fixing rear brake issue i have had for the past 100k miles, converting the a/c and heater controls, sway bars, auto to 5 speed, refinishing honda wheels for winter use, and other miscellaneous parts.

    Pics of the parts car.

    Wheels in good shape, really just need cleaning, but i will refinish them.

    5 speed and fancy power window buttons.


    So today i got both cars in the garage and started taking body parts off the parts car.
    Last edited by conozo; 09-07-2009 at 05:58 PM.

    1988 Honda Accord LSDX-I



  2. #2
    LXi User Bass Man's Avatar
    Join Date
    Jun 2008
    Vehicle
    '87 HATCH currently under the knife. 89/94/96 Sidekick that will go anywhere I want it to.
    Location
    Rogue River, So. oregon
    Posts
    972

    Re: Converting DX to DX-I project.

    Sweet! How much for the weber?

  3. #3

    Dr_Snooz's Avatar
    Join Date
    Jun 2007
    Vehicle
    1989 Accord LX-i
    Location
    Fresno, California
    Posts
    10,661

    Re: Converting DX to DX-I project.

    So awesome! Congrats! Keep us updated with pics.
    Dr_Snooz

    "I like to take hammers, and just break stuff, just break stuff." - Beavis


    1989 Honda Accord LX-i Coupe, 240k miles, MT swap, rear disc swap

    Shop manual downloads available here: CLICK TO VIEW

  4. #4
    LX User
    Join Date
    Apr 2009
    Vehicle
    1987 Accord Lx-i
    Location
    Gaffney, SC
    Posts
    258

    Re: Converting DX to DX-I project.

    my car looks almost as bad as your parts car lol....my interior's not too bad except for the half broke armrest

    EDIT: WOW 3 POSTS AT 6 18

  5. #5

    conozo's Avatar
    Join Date
    Jan 2005
    Vehicle
    1988 Honda Accord DX, 260,000 Miles, Daily Driver
    Location
    Fort Wayne, Indiana
    Posts
    1,156

    Re: Converting DX to DX-I project.

    Quote Originally Posted by Bass Man View Post
    Sweet! How much for the weber?
    I will be selling the weber in a week or two, once i make sure i can actually do this conversion, lol. Also my automatic tranny is in very good condition, it was rebuilt about 55k miles ago because my friend put it in reverse when driving. I'll put those on the trading post when the time comes.
    Last edited by conozo; 09-07-2009 at 06:29 PM.

    1988 Honda Accord LSDX-I

  6. #6
    3Geez Veteran Civic Accord Honda's Avatar
    Join Date
    Aug 2006
    Vehicle
    1995 Civic/ 1988 CRX
    Location
    Tehachapi Ca
    Posts
    13,103

    Re: Converting DX to DX-I project.

    Sweet!! DX-i ftmfw

    1988 Honda Accord LX-i Coupe 123k miles.

  7. #7

    carotman's Avatar
    Join Date
    Jul 2000
    Vehicle
    89 Accord LX/B20A | 87 Accord Hatch "S" Stock | 94 Civic Hatch CX
    Location
    Montreal South Shore
    Posts
    9,984

    Re: Converting DX to DX-I project.

    Will you be using that blue shifter console?

    I need one for the hatch!

    http://pages.videotron.com/omus
    3geez member since July 12 2000

    I need these parts!
    https://www.3geez.com/forum/showthread.php?t=67742

  8. #8

    conozo's Avatar
    Join Date
    Jan 2005
    Vehicle
    1988 Honda Accord DX, 260,000 Miles, Daily Driver
    Location
    Fort Wayne, Indiana
    Posts
    1,156

    Re: Converting DX to DX-I project.

    Quote Originally Posted by carotman View Post
    Will you be using that blue shifter console?

    I need one for the hatch!
    Possibly, im not sure yet. It depends if the heater controls fit in the casette holder so i can have room for the touch screen above it. I'll let you know soon.

    1988 Honda Accord LSDX-I

  9. #9
    3Geez Veteran MessyHonda's Avatar
    Join Date
    Feb 2006
    Vehicle
    89 LX-i(5speed)
    Location
    Bay Area
    Posts
    22,201

    Re: Converting DX to DX-I project.

    thats cool hope this becomes a how to/update on your car

    1989 Honda Accord LX-i
    B18c1 swap since 7/2011
    175whp and 132tq
    Redzone tuned

  10. #10

    conozo's Avatar
    Join Date
    Jan 2005
    Vehicle
    1988 Honda Accord DX, 260,000 Miles, Daily Driver
    Location
    Fort Wayne, Indiana
    Posts
    1,156

    Re: Converting DX to DX-I project.

    Yesterday i worked on the car a bit. What i started doing was removing the interior on the parts car. Since it didnt matter if i broke anything i would know how to remove it when it came to my car. I also wanted to make sure that the wiring harness was in good condition, since it appeared that they had to rig up a switch to turn the headlights on, but that wasnt the case. The switch didnt go to anything. The only thing they did was wire a panasonic tape player directly to the wiring harness. Ill be taking the end off mine and putting that on there just incase i would like to use it correctly later. Currently i dont use the radio wiring harness in my car, i have separate power and speakers wires.



    Disregard the oil, but the brown stuff is coolant if you cant tell. This car was in need of some serious maintenance for a long time.

    It may be hard to tell but you can see clearly into the engine bay, from a 1 foot long gap. This is on both sides of the car too.
    \
    Carpet was absolutely disgusting, moldy on the bottom too.

    Dash is out and next ill be taking apart my car then working on the fuel line.

    1988 Honda Accord LSDX-I

  11. #11

    87roach's Avatar
    Join Date
    Mar 2007
    Vehicle
    87 Hatch
    Location
    Summerland, B.C.
    Posts
    1,629

    Re: Converting DX to DX-I project.

    Good work so far man, this is a serious project so make sure you take your time and account for everything/get it all right!
    Andrew.

    My hatch build thread(started in winter of 07).

  12. #12

    carotman's Avatar
    Join Date
    Jul 2000
    Vehicle
    89 Accord LX/B20A | 87 Accord Hatch "S" Stock | 94 Civic Hatch CX
    Location
    Montreal South Shore
    Posts
    9,984

    Re: Converting DX to DX-I project.

    It's comming along nice

    How's the trunk carpet? (I'm leeching parts here lol)

    http://pages.videotron.com/omus
    3geez member since July 12 2000

    I need these parts!
    https://www.3geez.com/forum/showthread.php?t=67742

  13. #13

    conozo's Avatar
    Join Date
    Jan 2005
    Vehicle
    1988 Honda Accord DX, 260,000 Miles, Daily Driver
    Location
    Fort Wayne, Indiana
    Posts
    1,156

    Re: Converting DX to DX-I project.

    Quote Originally Posted by carotman View Post
    It's coming along nice

    How's the trunk carpet? (I'm leeching parts here lol)
    Not sure, it would definitely be dirty, but ill check to see if its torn or worn. It might be a week before i know about the part around the shifter too.

    Day 3 of work. Took the day off today to work on it. Part removal went smoothly, but found a few surprises. Surprise 1 is rust reaching the inside of the car on the rear wheel wells, my brother-in-law has a welder, so i will fix that after i get it up and running. Surprise 2, shop who rebuilt my engine did not use any new gaskets for anything that connects to the engine. They were all brittle and broken. Surprise 3, i had oil leaking from the distributor O ring, and they used the wrong size, but it was new so at least they tried.


    Took the interior and dash out, saved the carpet for next time.

    Surprise 4, lots of oil in the intake and on valves. Is this from leaking valve stems seals? Should i take the head off the other car if it doesnt have any oil and put it on mine or replace the valve seals, im not sure what that involves. Doing this project is a big step for me, i dont feel quite comfortable tinkering with engines yet. Supposedly this is a rebuilt head with 20k miles on it but i dont think so. Car does use oil, has great compression, i think it has little blue smoke until warms up.


    This is the worst one but the others ones arent much better.

    Removed so far was most coolant hoses, distributor, thermostat housing, intake manifold, alternator, part of the wiring.

    Cant work on it tomorrow, but sunday i will. Going to put both cars on blocks, remove everything else i need to from my car, start installing the fuel line and tank, cabin wiring harness, and heater.
    Last edited by conozo; 09-11-2009 at 04:07 PM.

    1988 Honda Accord LSDX-I

  14. #14
    3Geez Veteran Civic Accord Honda's Avatar
    Join Date
    Aug 2006
    Vehicle
    1995 Civic/ 1988 CRX
    Location
    Tehachapi Ca
    Posts
    13,103

    Re: Converting DX to DX-I project.

    Good job man! wish i would of have got my old DX running and ditched my lxi lol

    1988 Honda Accord LX-i Coupe 123k miles.

  15. #15
    LXi User Bass Man's Avatar
    Join Date
    Jun 2008
    Vehicle
    '87 HATCH currently under the knife. 89/94/96 Sidekick that will go anywhere I want it to.
    Location
    Rogue River, So. oregon
    Posts
    972

    Re: Converting DX to DX-I project.

    Scary to think people drive 80mph with their strut-towers rotted like that...

    Done yet?

  16. #16

    Tomisimo's Avatar
    Join Date
    Sep 2006
    Vehicle
    Honda Accord's EXi #1 [A20a4] R.I.P & #2 [B20a2]
    Location
    Norway/Europe
    Posts
    1,794

    Re: Converting DX to DX-I project.

    I'd took that head off and send it to the shop for a nice cleanup and replaced Valve steems and new manifold also, get it cleaned... That looked nasty

    Its prttey fnuny how you can raed tihs eintre snetnece with all tehse ellters out of palce...

    My Build Thread

  17. #17
    3Geez Veteran Rendon LX-i's Avatar
    Join Date
    Apr 2003
    Vehicle
    86 Honda Accord sedan B-series
    Location
    Selah, Washington, United States
    Posts
    6,435

    Re: Converting DX to DX-I project.

    nice progress my friend.....That head dont look to healthy i would get it touched up before install


    200+ ALL MOTOR LS VTEC

  18. #18

    conozo's Avatar
    Join Date
    Jan 2005
    Vehicle
    1988 Honda Accord DX, 260,000 Miles, Daily Driver
    Location
    Fort Wayne, Indiana
    Posts
    1,156

    Re: Converting DX to DX-I project.

    Yes i am definately going to fix it up, but not sure how. Is there a how to on valve stem seal replacement.

    1988 Honda Accord LSDX-I

  19. #19

    AccordB20A's Avatar
    Join Date
    Sep 2005
    Vehicle
    1987 Honda Accord 2.0Si
    Location
    Stratford, New Zealand
    Posts
    7,407

    Re: Converting DX to DX-I project.

    do the a20a3 efi motors have a different compression ratio to the whatever your dx motor has? if it didnt i would just swap the efi onto the carb motor haha

    good luck with the swap, seems like your having fun. i know i had fun with mine hah

  20. #20

    conozo's Avatar
    Join Date
    Jan 2005
    Vehicle
    1988 Honda Accord DX, 260,000 Miles, Daily Driver
    Location
    Fort Wayne, Indiana
    Posts
    1,156

    Re: Converting DX to DX-I project.

    Quote Originally Posted by AccordB20A View Post
    do the a20a3 efi motors have a different compression ratio to the whatever your dx motor has? if it didnt i would just swap the efi onto the carb motor haha
    The block in my car is a rebuilt A20A3 engine. So i would assume that the heads are the same.

    I didnt find a how to on the site to change the valve stem seals, but i did find a nice how to in my haynes manual. So i will be doing that, then working on the rest of the FI swap.
    Are the ebay gasket sets any good? I dont plan on using the head gasket from this kit, but would use almost everything else. Here is a link to one ebay gasket set

    1988 Honda Accord LSDX-I

  21. #21
    3Geez Veteran Civic Accord Honda's Avatar
    Join Date
    Aug 2006
    Vehicle
    1995 Civic/ 1988 CRX
    Location
    Tehachapi Ca
    Posts
    13,103

    Re: Converting DX to DX-I project.

    yeah all the gaskets besides the head gasket should be good from what i here... use a felpro hg

    1988 Honda Accord LX-i Coupe 123k miles.

  22. #22
    LXi User Bass Man's Avatar
    Join Date
    Jun 2008
    Vehicle
    '87 HATCH currently under the knife. 89/94/96 Sidekick that will go anywhere I want it to.
    Location
    Rogue River, So. oregon
    Posts
    972

    Re: Converting DX to DX-I project.

    You can go to an import parts store and get some nice gaskets for cheap!

  23. #23

    carotman's Avatar
    Join Date
    Jul 2000
    Vehicle
    89 Accord LX/B20A | 87 Accord Hatch "S" Stock | 94 Civic Hatch CX
    Location
    Montreal South Shore
    Posts
    9,984

    Re: Converting DX to DX-I project.

    The head might be rebuilt but if they didn't change the valve guides, the thing can wear fast.

    Worn valve guides will put stress on the seals and they will fail quite quickly.

    You can slap any head on that engine and it will work with the EFI conversion.

    http://pages.videotron.com/omus
    3geez member since July 12 2000

    I need these parts!
    https://www.3geez.com/forum/showthread.php?t=67742

  24. #24

    conozo's Avatar
    Join Date
    Jan 2005
    Vehicle
    1988 Honda Accord DX, 260,000 Miles, Daily Driver
    Location
    Fort Wayne, Indiana
    Posts
    1,156

    Re: Converting DX to DX-I project.

    Day 4

    Today i only had a few hours to work on the car. So didn't get a whole lot done. But i did remove the wiring harness from the engine bay, side panels, some more coolant hoses, heater, ac, carpet, and other small misc parts.




    Tomorrow im going to order a gasket kit, hoses, and everything i think i need now. Then it will probably be untill next weekend before i can work on it again.

    1988 Honda Accord LSDX-I

  25. #25

    conozo's Avatar
    Join Date
    Jan 2005
    Vehicle
    1988 Honda Accord DX, 260,000 Miles, Daily Driver
    Location
    Fort Wayne, Indiana
    Posts
    1,156

    Re: Converting DX to DX-I project.

    Yesterday i did a little work. I completely removed the pedals, lowered the steering column, removed the wiring harness from the car, and removed other misc parts to get to free the tranny. I started to remove some parts to get to the fuel line from the parts car.

    Today im hoping my friend has the day free so we can remove the auto tranny. I'm concerned that i wont be able to lift the car high enough to slide the tranny out from under. I guess well just try it and see. I should be getting my gasket kit today so i can work on the valve seals.
    Last edited by conozo; 09-21-2009 at 04:01 AM.

    1988 Honda Accord LSDX-I

Similar Threads

  1. Converting carb to FI
    By badbobb in forum 2geez Accords
    Replies: 10
    Last Post: 03-10-2009, 05:45 PM
  2. Converting the boot(y)
    By Kagato in forum Interior & Exterior Care
    Replies: 15
    Last Post: 09-01-2008, 06:31 PM
  3. converting to 5 speed
    By newaccorddriver in forum 3geez Accords
    Replies: 2
    Last Post: 09-04-2005, 12:35 PM
  4. Converting to 5 speed!!!
    By Bloodlust in forum Classic Honda Community Chat
    Replies: 32
    Last Post: 08-11-2004, 09:53 AM

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
This website uses cookies
We use cookies to store session information to facilitate remembering your login information, to allow you to save website preferences, to personalise content and ads, to provide social media features and to analyse our traffic. We also share information about your use of our site with our social media, advertising and analytics partners.
     
Links monetized by VigLink