Results 1 to 18 of 18

Thread: 4 inch drop on an 89 accord?

  1. #1
    DX User
    Join Date
    Dec 2007
    Posts
    23

    Question 4 inch drop on an 89 accord?

    is it possible? i would see if tires rubbed at 4 inch and roll the fender. it would probably would, but i just want to be slammed. putting on GC will drop me 3, but will adding a certain shock drop me even lower? and if so which shock? ohh and is it possible to put skunk 2 on my 89 hatch?
    thanks



  2. #2
    LXi User Bass Man's Avatar
    Join Date
    Jun 2008
    Vehicle
    '87 HATCH currently under the knife. 89/94/96 Sidekick that will go anywhere I want it to.
    Location
    Rogue River, So. oregon
    Posts
    972

    Re: 4 inch drop on an 89 accord?

    Is it gonna be a show car or daily?? Cuz it won't be any fun to drive other than on the track after such a drop.

  3. #3
    DX User
    Join Date
    Dec 2007
    Posts
    23

    Re: 4 inch drop on an 89 accord?

    daily. haha. my car is really bouncy already. i mean my friends civic is dumped but rides pretty smooth. he is a couple fingers off the ground. he is on skunks. thats why i asked about them. i know what im trying to do (basically) just dont know what will fit.
    my friends integ has ground controll, i took a look at them and it seems it can drop lower than three inch but there was a ring around the sleeve wich wouldnt let it go lower.

  4. #4
    LXi User Bass Man's Avatar
    Join Date
    Jun 2008
    Vehicle
    '87 HATCH currently under the knife. 89/94/96 Sidekick that will go anywhere I want it to.
    Location
    Rogue River, So. oregon
    Posts
    972

    Re: 4 inch drop on an 89 accord?

    Well, if your gas stations aren't too high for your buddies Civic, then it shouldn't be too bad if you slam it. I have no idea about slammed cars, but if that Civic is slammed and smooth, he's either really lucky, or there are REALLY expencive coil-overs under it.

  5. #5

    Hash_man_Se_i's Avatar
    Join Date
    Sep 2002
    Vehicle
    1988 EX-i 4dr, 1989 se-i 4dr (RIP), 1989 se-i 4dr (RIP), 2006 TSX
    Location
    Calgary, AB, Canada
    Posts
    3,816

    Re: 4 inch drop on an 89 accord?

    Ground controls can get you lower that 3 inches I would say... I have them on my car and I could lower mine about another inch or something on the ground controls, but then it wouldn't go anywhere, it already is bad enough. My car currently has less then 3" of ground clearance to the crossmember in the front as I can no longer fit my low profile jack in there without driving up on wood or something first.

  6. #6

    Tomisimo's Avatar
    Join Date
    Sep 2006
    Vehicle
    Honda Accord's EXi #1 [A20a4] R.I.P & #2 [B20a2]
    Location
    Norway/Europe
    Posts
    1,794

    Re: 4 inch drop on an 89 accord?

    I wouldnt recommend it, it will be a bone shaking ride believe me. I have 2" at the front and 1.6 at the back and I think its to much. the ride is hard and I loose some of its handling as the car is bouncy at the speed bumps or put holes. it really do jump. If you really want to lower your car, go with Air susp, that way you can lower it and rice it up.
    I'm going to change my springs to 1.6/1.5" soon.

    Its prttey fnuny how you can raed tihs eintre snetnece with all tehse ellters out of palce...

    My Build Thread

  7. #7

    AccordB20A's Avatar
    Join Date
    Sep 2005
    Vehicle
    1987 Honda Accord 2.0Si
    Location
    Stratford, New Zealand
    Posts
    7,407

    Re: 4 inch drop on an 89 accord?

    we couldnt even legally lower our cars that much over here, we have to have 4 inches of clearance between the road and the lowest point on the car.

  8. #8
    LXi User Bass Man's Avatar
    Join Date
    Jun 2008
    Vehicle
    '87 HATCH currently under the knife. 89/94/96 Sidekick that will go anywhere I want it to.
    Location
    Rogue River, So. oregon
    Posts
    972

    Re: 4 inch drop on an 89 accord?

    Here, your frame can't be lower than your wheel, but I almost scrape and I'm stock ride hight. I'm gonna lower the rear about 1/2" and the front about 1 1/2" so I get a pretty even ride and my struts don't hate me. I'm gonna have a lot of weight in the back from my system, though.

  9. #9
    DX User
    Join Date
    Dec 2007
    Posts
    23

    Re: 4 inch drop on an 89 accord?

    hey hash man, what struts are u on? cuz the GC is just the sleeve right?
    and yeah my friend scrapes everywhere. i asked him today and he dropped his car bout 5 inches. but around here its kinda the trend. i like it tho. i cringe everytime im in his car, but it looks pretty sick i must say. and cops around herewill only pick on yur car if their bored. weve driven by cops all the time. right now im on sprints with blown shocks. :[ i know im an idiot. but im trying to fix it up right. im slightly tucking tire in the front but i cant stand my wheel gap in the back. im deff down to be low and slow.
    Any lude coilovers fit front and back? and if they do what year?

  10. #10

    Hash_man_Se_i's Avatar
    Join Date
    Sep 2002
    Vehicle
    1988 EX-i 4dr, 1989 se-i 4dr (RIP), 1989 se-i 4dr (RIP), 2006 TSX
    Location
    Calgary, AB, Canada
    Posts
    3,816

    Re: 4 inch drop on an 89 accord?

    I have tokico blues in the rear, and Koni reds in the front... Still a little bouncy for my liking.

    Where abouts are you located davidshonda?

    BTW check link in my sig for pics of my car and drop.

  11. #11
    LXi User Bass Man's Avatar
    Join Date
    Jun 2008
    Vehicle
    '87 HATCH currently under the knife. 89/94/96 Sidekick that will go anywhere I want it to.
    Location
    Rogue River, So. oregon
    Posts
    972

    Re: 4 inch drop on an 89 accord?

    Good tip on the negative camber in the front, search this site for the 2g Prelude front UCA's (Upper Control Arm), I heard they give you a good amount of camber back.

  12. #12
    DX User
    Join Date
    Dec 2007
    Posts
    23

    Re: 4 inch drop on an 89 accord?

    hmm so you say your koni and tokico with ground control can drop more than three in? front and back.
    yeah ima go to my local pick and pull and try and get those lude arms.
    i am in San Jose CA

  13. #13
    3Geez Veteran MessyHonda's Avatar
    Join Date
    Feb 2006
    Vehicle
    89 LX-i(5speed)
    Location
    Bay Area
    Posts
    22,201

    Re: 4 inch drop on an 89 accord?

    hey a bay area person.....DONT LOWER YOUR CAR THAT MUCH...i drive my car that is 2.25 inch drop in the front and 2 inch in the rear and i already scraped my front crossmember and downpipe on my DC headers

    1989 Honda Accord LX-i
    B18c1 swap since 7/2011
    175whp and 132tq
    Redzone tuned

  14. #14
    DX User
    Join Date
    Dec 2007
    Posts
    23

    Re: 4 inch drop on an 89 accord?

    where u around messy honda?
    im kinda down to scrape tho. i dont WANT to, but my car is slow. if i cant be cool going fast might aswell look cool going slow haha

  15. #15


    Join Date
    Sep 2005
    Vehicle
    1989 LX-i Coupe, 2018 Toyota 4Runner SR5 Premium 4x4
    Location
    AZ
    Posts
    2,969

    Re: 4 inch drop on an 89 accord?

    buy the k-sport kontrol pro's if you want to go that low, but i wouldn't advise going that low ever.
    dead white and blue

  16. #16
    3Geez Veteran MessyHonda's Avatar
    Join Date
    Feb 2006
    Vehicle
    89 LX-i(5speed)
    Location
    Bay Area
    Posts
    22,201

    Re: 4 inch drop on an 89 accord?

    Quote Originally Posted by stat1K View Post
    buy the k-sport kontrol pro's if you want to go that low, but i wouldn't advise going that low ever.
    yeah even 2 inch drop is kinda low...my poor front cross member is getting beat up.

    1989 Honda Accord LX-i
    B18c1 swap since 7/2011
    175whp and 132tq
    Redzone tuned

  17. #17
    DX User geej07's Avatar
    Join Date
    Sep 2008
    Vehicle
    87 accord lxi rip. 88 lx 89 lxi parts car
    Location
    zanesville ohio
    Posts
    81

    Re: 4 inch drop on an 89 accord?

    I've got skunks 2s on my 88 4dr it rides great just a little bumpy but really not to bad. My coils are for a ef civic. The backs were a little short but the fronts fit perfect. I just got some blocks from advance auto an it but the rear back up to where its sopost to be.

  18. #18
    3Geez Veteran Pico's Avatar
    Join Date
    Dec 2005
    Vehicle
    88 LX-i Hatch (Sold),1989 LX-i Sedan (Sold), 88 LX-i Sedan (Sold), 89 LX-i Sedan (RIP)
    Location
    Vallejo, CA.
    Posts
    6,338

    Re: 4 inch drop on an 89 accord?

    I've got goldlines on my 89 with 2.25 drop on tokico shocks and Ive got to slow down when ever I can

Similar Threads

  1. 1.5 inch drop.
    By Bryan in forum Suspension/Wheels/Tires/Brakes
    Replies: 10
    Last Post: 01-23-2004, 12:07 PM
  2. My 2 inch drop
    By od2681 in forum Classic Honda Pics & Videos
    Replies: 30
    Last Post: 11-16-2003, 01:28 PM
  3. 1.5 inch drop pics please.
    By SDracerBOY in forum Suspension/Wheels/Tires/Brakes
    Replies: 23
    Last Post: 10-25-2003, 06:27 PM
  4. 2.25 inch drop??
    By kennycm in forum Suspension/Wheels/Tires/Brakes
    Replies: 3
    Last Post: 03-16-2003, 08:56 AM
  5. 1 inch drop
    By 89cordlx in forum Suspension/Wheels/Tires/Brakes
    Replies: 17
    Last Post: 09-18-2002, 05:03 PM

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
This website uses cookies
We use cookies to store session information to facilitate remembering your login information, to allow you to save website preferences, to personalise content and ads, to provide social media features and to analyse our traffic. We also share information about your use of our site with our social media, advertising and analytics partners.
     
Links monetized by VigLink