i want to switch my lx to fuel injected what will i need to do it
i want to switch my lx to fuel injected what will i need to do it
That swap is well documented here. I think I just did a search in the forum and found the detailed swap.
They sell a kit for the conversion at your local Wal Mart.
to do it properly your dash and some interior have to come out, and you need a lxi/exi/sei fuel tank.. that shit alone takes longer than the swap itself under the hood...
i will be performing one of these soon on a 86lx 4dr... keep an eye on my thread as i have shortcuts..
I plan on doing this as well. I already have the wire harnesses, intake manifold, injectors, ECU, gauge cluster and other stuff. Toughest part will be the damn fuel tank. I can't have a smelly gasoline soaked fuel tank sitting around my living room.
just stuff rags in all the holes before you bring it in...
Could someone post a link? I would like to see this well-documented thread. Or a sticky on it would be nice...
My assumption is that it is an in-tank pump... And without a fuel return inlet.
well i have searched countless times and can not find a "how to"
My cars.....
1988 S10 L4=120hp
1989 Accord L4=98hp
1998 prelude L4=220hp
HONDA the power of dreams....
I think it's been taken down. It's an enormous amount of work. I'd recommend you just sell the carb car and buy an injected one.
Dr_Snooz
"I like to take hammers, and just break stuff, just break stuff." - Beavis
1989 Honda Accord LX-i Coupe, 240k miles, MT swap, rear disc swap
Shop manual downloads available here: CLICK TO VIEW
I've given up on the idea of the swap and have just decided to go with a Weber carb, cam regrind and header/exhaust work. =/
Bookmarks